AULA F99

Contents

AULA F99 Mechanical Keyboard User Manual

Model: F99 | Brand: AULA

1. Introduction

Thank you for choosing the AULA F99 Mechanical Keyboard. This user manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your new keyboard. The AULA F99 is a versatile gasket-mounted gaming keyboard featuring a 99-key streamlined layout, triple-mode connectivity (Bluetooth 5.0, 2.4G Wireless, USB-C Wired), hot-swappable switches, PBT keycaps, and vibrant RGB backlighting with an 8000mAh high-capacity battery.

AULA F99 Custom Keyboard highlighting features
Figure 1: AULA F99 Custom Keyboard with key features: BT5.0/2.4G/Wired, Gasket Structure, Pre-lubed Linear Switches, RGB Backlit, 8000mAh Battery, PBT Keycaps, Hot Swappable, 96% Layout with Numpad.

2. Safety Information

  • Keep the keyboard away from liquids and excessive moisture.
  • Avoid exposing the keyboard to extreme temperatures.
  • Do not attempt to disassemble or modify the keyboard, as this may void the warranty and cause damage.
  • Use only the provided USB-C cable for charging and wired connection.

3. Package Contents

Please check the package for the following items:

  • AULA F99 Mechanical Keyboard
  • USB-C to USB-A Cable
  • 2.4G Wireless Receiver
  • Keycap Puller
  • Switch Puller
  • User Manual (this document)

4. Setup

4.1 Initial Charging

Before first use, it is recommended to fully charge the keyboard. Connect the USB-C cable to the keyboard's Type-C port and the other end to a USB power source (e.g., computer USB port, wall adapter). The indicator light will be on during charging and turn off when fully charged.

The keyboard features an 8000mAh high-capacity battery, providing approximately 53 hours of use with backlighting on, and up to 400 hours with backlighting off.

8000mAh High-capacity Battery
Figure 2: The AULA F99 keyboard is equipped with an 8000mAh high-capacity battery, offering extended usage times.

4.2 Connection Modes

The AULA F99 supports three connection modes: Bluetooth 5.0, 2.4G Wireless, and USB-C Wired. A switch on the side of the keyboard allows you to select the desired mode.

Triple Mode Connection
Figure 3: The keyboard supports BT5.0, 2.4GHz, and USB-C wired connections for compatibility with various devices like Switch, Xbox, Playstation, PC, Laptop, Tablet, and Phone.

4.2.1 2.4G Wireless Mode

  1. Locate the mode switch on the side of the keyboard and slide it to the "2.4G" position.
  2. The cyan indicator light on the keyboard will blink slowly.
  3. Long press the FN + 4 keys for 3 seconds to enter pairing mode. The cyan light will flash rapidly.
  4. Plug the 2.4G wireless receiver into a USB port on your computer.
  5. The keyboard will automatically pair. Once connected, the cyan light will stay on for 2 seconds and then turn off. The keyboard is now ready for use.
  6. The 2.4G receiver can be stored in a dedicated slot on the side of the keyboard when not in use.
Video 1: Demonstrates the side function keys for tri-mode switching and the convenient receiver storage slot on top of the keyboard. It also shows the process of connecting the Type-C cable for wired mode.

4.2.2 Bluetooth Mode

The keyboard supports connecting up to three Bluetooth devices (BLE 5.0 / BLE 3.0).

  1. Slide the mode switch to the "BT" position.
  2. Select a Bluetooth channel by pressing FN + 1, FN + 2, or FN + 3. The blue indicator light under the corresponding key will flash rapidly, indicating it's ready for pairing.
  3. On your device (computer, tablet, phone), search for Bluetooth devices and select "AULA-F99 5.0" or "AULA-F99 3.0".
  4. Once connected, the blue light will stay on for 2 seconds and then turn off.
  5. To switch between paired Bluetooth devices, simply press FN + 1, FN + 2, or FN + 3. The blue light will flash slowly during reconnection and then turn off.

4.2.3 USB-C Wired Mode

  1. Slide the mode switch to the center (wired) position.
  2. Connect the USB-C cable to the keyboard's Type-C port and the other end to your computer's USB port.
  3. The white light on the "4" button will light up for 2 seconds, indicating a successful wired connection.

4.3 Adjustable Feet

The keyboard features dual-section foot support with non-slip rubber, allowing you to adjust the typing angle for a more comfortable experience.

5. Operating Instructions

5.1 System Compatibility

The AULA F99 keyboard is compatible with Windows XP/7/10, Android, iOS, and Mac operating systems.

  • FN + Q: Switch to Android system mode.
  • FN + W: Switch to Windows system mode.
  • FN + E: Switch to Mac system mode.
  • FN + R: Switch to iOS system mode.

Note: After switching to Mac/iOS system, the WIN and ALT key positions are swapped.

5.2 FN Key Combinations (Windows Mode)

CombinationFunction
FN + F1My Computer
FN + F2Search
FN + F3Calculator
FN + F4Media Player
FN + F5Previous Track
FN + F6Next Track
FN + F7Play/Pause
FN + F8Stop
FN + F9Mute
FN + F10Volume Down
FN + F11Volume Up
FN + F12Lock WIN key
FN + WIN-LLock/Unlock Left WIN key (indicator light on when locked)

5.3 RGB Lighting Control

The AULA F99 features 16 million colors RGB backlighting with up to 16 lighting effects adjustments and music rhythm light effects.

Driver Macro Customization
Figure 4: The keyboard supports 16.8 million RGB backlighting, macro recording & editing, custom shortcut keys, and musical rhythm lighting effects. Driver available at bit.ly/m/AULA.
  • FN + Shift-R: Switch light bar light mode.
  • FN + / or ?: Switch light bar color.
  • FN + AB-R: Cycle through light bar brightness.
  • FN + Ctrl-R: Cycle through light bar speed.
  • FN + Brightness+ / Brightness-: Adjust brightness.
  • FN + Speed+ / Speed-: Adjust speed.
  • FN + 5-RGB: Ambient light bar shows keyboard power level. Green lights indicate 20% battery per light (5 lights = 100%). Red indicates low battery.

5.4 Hot-Swappable Switches

The AULA F99 features a PCB hot-swappable socket that supports both 3-pin and 5-pin switches, allowing for easy customization and replacement without soldering. The keyboard comes with pre-lubed LEOBOG Star Vector switches for a better typing feel.

Hot Swappable Switches
Figure 5: The keyboard features hot-swappable sockets supporting 3-pin/5-pin switches and comes with pre-lubed LEOBOG Star Vector Switches.

To replace a switch:

  1. Use the provided keycap puller to carefully remove the keycap from the desired switch.
  2. Use the provided switch puller to gently grip the top and bottom clips of the switch and pull it straight up.
  3. Align the pins of the new switch with the holes on the PCB. Ensure the pins are straight to avoid bending.
  4. Press the new switch firmly into place until it clicks.
  5. Reattach the keycap.

5.5 Driver and Macro Customization

For advanced customization, including macro recording, editing, custom shortcut keys, and detailed RGB lighting effects, you can download the official driver software. The driver also supports musical rhythm lighting effects.

Download the driver from: bit.ly/m/AULA

6. Maintenance

6.1 Cleaning the Keyboard

  • Disconnect the keyboard from all power sources and devices before cleaning.
  • Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the surface of the keyboard.
  • For cleaning between keycaps, use a can of compressed air to blow away dust and debris.
  • The PBT keycaps are designed to be long-lasting and wear-resistant, and their surface should not become oily with prolonged use.

6.2 Battery Care

  • To prolong battery life, avoid fully discharging the keyboard frequently.
  • If the keyboard will not be used for an extended period, charge it to about 50% and store it in a cool, dry place.

7. Troubleshooting

7.1 Common Issues and Solutions

  • Keyboard not responding: Ensure the keyboard is charged. Check the connection mode (wired, 2.4G, or Bluetooth) and ensure it's correctly selected and paired. Try reconnecting the cable or re-pairing the wireless connection.
  • Keys not working: If individual keys are not working, try removing and re-inserting the switch for that key. Ensure the switch pins are not bent.
  • RGB lighting not working/incorrect: Check lighting settings using FN key combinations. Ensure the keyboard is sufficiently charged. Use the driver software for advanced lighting customization.
  • Bluetooth connection issues: Ensure the keyboard is in Bluetooth pairing mode and your device's Bluetooth is enabled. Try removing the keyboard from your device's Bluetooth list and re-pairing.
  • 2.4G Wireless connection issues: Ensure the 2.4G receiver is securely plugged in. Try re-pairing the keyboard with the receiver (FN+4 for 3 seconds).

7.2 Factory Reset

To restore the keyboard to its default factory settings, long press FN + Esc for three seconds. Note that this will reset keyboard settings but will not clear previously paired Bluetooth devices.

8. Specifications

FeatureDetail
ModelF99
BrandAULA
Connection TypeUSB-C Wired, 2.4G Wireless, Bluetooth 5.0
Number of Keys99 Keys (96% Layout with Numpad)
Switch TypePluggable Mechanical Switches (LEOBOG Star Vector Switches, pre-lubed, hot-swappable 3-pin/5-pin)
Keycap MaterialTwo-color PBT plastic (Doublshot printing)
Backlight TypeMULTICOLOR RGB (16 million colors, music rhythm light effect)
Battery Capacity8000mAh Lithium Battery
Battery LifeApprox. 53 hours (backlight ON), Approx. 400 hours (backlight OFF)
Charging Voltage/CurrentDC 5V/830mA
Rated VoltageDC 3.7V
Dimensions (L x W x H)390.63 x 146.78 x 42.57 mm
Weight1183g
Operating SystemWIN XP/7/10, Android, iOS, MAC
StyleStandard, Ergonomics, Multimedia, Gaming, For Laptop, For Tablet, Multifunctional Keyboard
Wrist SupportNo
Gasket Structure Diagram
Figure 6: Exploded view of the Gasket Structure, showing layers like PBT keycaps, LEOBOG Star Vector Switches, Slotted PC positioning plate, PORON cotton, IXPE shaft underpad, PET voice actor pad, Single key slotted PCBA board, PORON base cotton, Silicone base pad, and Bottom case.

9. User Tips

  • Typing Feel: Many users appreciate the soft, quiet, and comfortable typing experience due to the gasket structure and sound-absorbing materials. If you prefer a heavier, clickier feel, consider experimenting with different hot-swappable switches.
  • Customization: The hot-swappable design allows for easy switch and keycap changes. Feel free to experiment with different switches for a personalized typing experience.
  • Check Contents: Upon receiving your keyboard, carefully inspect all components, especially the switches, for any bent pins or damage that might have occurred during transit.
  • Driver Software: For full control over RGB lighting, macros, and custom key assignments, download and install the official driver software from the provided link.

10. Warranty and Support

For warranty information, technical support, or further assistance, please refer to the official AULA website or contact the seller directly. A detailed user manual in PDF format is also available for download:

Download User Manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.