1. Product Overview
The Coolo Zigbee Smart Vibration Sensor is a compact device designed to detect vibrations and tilts, providing real-time monitoring and alerts through your smart home system. It integrates seamlessly with Tuya Smart App, Smart Life APP, Amazon Alexa, and Google Assistant, requiring a Zigbee hub for operation.

Figure 1: Product overview highlighting Real-time Monitor, Vibration Alarm, and Tilt Alarm capabilities. The sensor is compatible with Tuya Smart App, Smart Life APP, Amazon Alexa, and Google Assistant.
Key Features:
- Real-time Vibration and Tilt Detection
- Instant Push Notifications to Smartphone
- Adjustable Sensitivity Settings
- Low Battery Alarm
- Smart Automation Linkage with Other Devices
- Zigbee 3.0 Protocol
- Compact Design (Φ40×13mm)
2. Setup and Installation
Please read this manual carefully before operating the device.
2.1. Powering On
- Rotate the battery cover anticlockwise to open it.
- Remove the battery insulation film to power on the product.
- Close the battery cover by rotating it clockwise.
2.2. Network Configuration (Pairing)
The Zigbee Vibration Sensor requires a Zigbee gateway (hub) to function. This sensor is compatible with Tuya/Smart Life ecosystems.
- Ensure your Zigbee gateway is powered on and in pairing mode (refer to your gateway's manual for specific instructions).
- Press the RESET button on the sensor for 3 seconds and then release it. The red LED indicator will flash rapidly, indicating it is in network configuration mode.
- On your smart home app (e.g., Tuya Smart or Smart Life), initiate the device search function for new Zigbee devices.
- Once detected, add the sensor to your device list and assign it to a room or group as desired.
2.3. Installation
- Clean the surface where you intend to mount the sensor.
- Use the provided 3M adhesive sticker to affix the product to the desired target position.
- Ensure the sensor is placed on a stable, flat surface or object for optimal performance.
3. Operating Instructions
3.1. Real-time Monitoring and Alerts
Once connected to your Zigbee gateway, the sensor will monitor for vibrations and tilts. When activity is detected, you will receive instant push notifications on your smartphone via the connected app.

Figure 2: Real-time remote monitoring via the smartphone app, displaying a log of detected tilts and vibrations.

Figure 3: Example of a smart alert notification received on a smartphone when the sensor detects activity.
3.2. Customizing Sensitivity Settings
You can adjust the sensor's sensitivity to better suit your environment and reduce false alarms. This is done through the device settings in your smart home app.
- Open your smart home app and navigate to the Zigbee Vibration Sensor's settings.
- Look for a