Burhui Multicolor G40 LED String Lights

Introduction

Thank you for choosing Burhui Multicolor G40 LED String Lights. These connectable, shatterproof lights are designed to add a vibrant and festive ambiance to your outdoor and indoor spaces. Please read this manual carefully before installation and use to ensure safe and optimal performance.

Important Safety Information

• This product works with a 110V-120V high-voltage power supply. Before use, ensure the power supply voltage matches the product's requirements to prevent device burnout and other hazards.
• The product has an IP45 waterproof rating and can only resist daily splashing water and rain. Do not immerse the entire string lights, plug, or end plug in water for a long time (e.g., swimming pools, puddles, fish tanks, etc.).
• Do not use it outdoors in extreme weather such as heavy rain or typhoons to prevent waterproof failure that may cause short circuits or electric shocks.
• Always disconnect the power before installing, removing, or repairing the string lights to avoid dangers caused by live-line operations.
• Minors must be supervised by adults throughout the installation and use process.
• Do not use this product in high-temperature, flammable, or explosive environments (e.g., near open flames, heaters, gasoline, etc.) to prevent safety accidents.
• Avoid the string lights being crushed or pulled by heavy objects to prevent wire breakage.
• Do not operate with power on. No modification allowed. Stop using immediately if damaged.

WARNING: Adult supervision is required for minors!

Specifications

Package Contents

Your Burhui G40 LED String Lights package includes:

• 1 x 50FT G40 String Lights with 25 Sockets
• 27 x G40 Shatterproof LED Bulbs (25 installed, 2 spare)
• 1 x US Standard Power Plug with Spare Fuse

Installation Steps

1. Fix the String Lights: Hang or fasten the string lights in the desired position according to your layout. Use hooks, ties, clips, or other suitable tools for fixation. Apply moderate force to avoid squeezing or pulling the wire. Ensure the wire is laid out naturally without excessive bending, and keep the distance between lamp holders even for a better decorative effect.

   

2. Power Connection: After confirming all installation steps are completed and the string lights are securely fixed, insert the plug of the string lights slowly into a 110V-120V US standard power socket. Make sure the plug is fully inserted for good contact with no looseness.

Operating Instructions

• Once plugged in, the lights will illuminate.
• These string lights are connectable, allowing you to link multiple sets together to extend the illuminated area. Ensure not to exceed the maximum recommended wattage for connected strings.
• The lights are dimmable (0-100% stepless dimming). To utilize the dimming feature, a compatible dimmer (not included) must be used.

Maintenance

• Cleaning: Ensure the lights are unplugged before cleaning. Gently wipe bulbs and wires with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Bulb Replacement: If a bulb needs replacement, ensure the power is disconnected. Carefully unscrew the old bulb and screw in a new E12 base G40 LED bulb. Use only bulbs of the same type and wattage (0.6W).
• Storage: When not in use for extended periods, unplug the lights, clean them, and store them in a cool, dry place away from direct sunlight and extreme temperatures.

Common Malfunctions & Solutions

• All bulbs not lighting up:
  1. Check the power switch and test with another socket to ensure the power source is working.
  2. Reinsert the plug firmly into the socket to ensure it is fully connected and there is no looseness.
• Partial bulbs not lighting up:
  1. Disconnect the power.
  2. Check and tighten any loose bulbs.
  3. Replace any burnt-out or damaged bulbs with a spare bulb.

User Tips

• Always ensure all connections, especially the main power plug and any tail plugs for connecting multiple strings, are secure before powering on. A loose connection can prevent the lights from working correctly.
• While the bulbs are shatterproof plastic, handle them with care during installation to avoid damaging the sockets or wiring.

Warranty and Support

For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

For additional resources, you may refer to the official user manual PDF: View User Manual (PDF)