1. Introduction
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your WESA EU Standard Electrical Wall Socket or Switch. Please read this manual thoroughly before installation and keep it for future reference. This product is designed for residential and general-purpose use, offering a reliable and aesthetically pleasing solution for your electrical needs.

Image: Front view of the WESA EU Standard Electrical Wall Socket.
2. Safety Information
WARNING: Risk of electric shock. Installation should only be performed by a qualified electrician or competent person in accordance with national wiring regulations.
- Always disconnect power at the main circuit breaker or fuse box before installing or servicing the product.
- Ensure all wiring connections are secure and correctly insulated.
- Do not install in wet or damp locations unless specifically rated for such environments.
- This product is designed for indoor use only.
- The product is made from high-temperature flame-retardant plastic to prevent fire hazards.

Image: High Temperature Flame Retardant Material feature.
3. Setup and Installation
This product is designed for wall-embedded installation. Follow these steps carefully:
- Power Disconnection: Before starting any electrical work, ensure the main power supply to the installation area is turned off at the circuit breaker. Verify with a voltage tester.
- Prepare the Wall Box: Ensure you have a standard wall box suitable for the product's dimensions. The product standard size is 83mm x 83mm. Refer to the dimensions diagram for detailed measurements.
- Wiring Connections:
- Connect the live wire (usually brown or red) to the 'L' terminal.
- Connect the neutral wire (usually blue or black) to the 'N' terminal.
- If the model is "With Ground" (e.g., 1 Socket With Ground, 2 Socket With Ground), connect the earth wire (usually green/yellow) to the 'E' or ground terminal. For "Not Ground" models, ensure proper insulation of any unused earth wire.
- For switch models (e.g., 1 Gang 1 Way Switch, 2 Gang 1 Way Switch), connect the load wire(s) to the appropriate switch terminal(s).
- Ensure all connections are tight and secure.
- Mounting:
- Carefully place the wired unit into the wall box.
- Secure the unit to the wall box using the provided screws. Do not overtighten.
- Attach the front plate or cover securely.
- Power Restoration: Once installation is complete and all covers are securely in place, restore power at the main circuit breaker.

Image: Product dimensions for installation.
4. Operating Instructions
Using your WESA electrical wall socket or switch is straightforward:
- For Sockets: Insert the plug of your appliance into the socket. Ensure the plug is fully inserted. The socket is rated for 220V and 16A.
- For Switches: Press the switch rocker to turn the connected light or appliance ON or OFF.
- USB Sockets (if applicable): For models with USB ports, connect your USB charging cable directly to the port to charge compatible devices.
5. Maintenance
Your WESA product requires minimal maintenance:
- Cleaning: To clean the surface, wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this may damage the finish or internal components.
- Inspection: Periodically check the product for any signs of damage, loose connections, or discoloration. If any issues are observed, disconnect power and consult a qualified electrician.
- Material: The product is made of durable plastic. Avoid harsh impacts to maintain its integrity.
6. Troubleshooting
If you encounter issues with your WESA electrical product, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power from socket/switch not working |
|
|
| Socket/switch feels warm |
|
|
| USB port not charging (if applicable) |
|
|
If problems persist, contact a qualified electrician or customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | WESA |
| Model Number | EP-03-BM |
| Material | Plastic |
| Socket Type | Socket 220V |
| Installation Type | Wall Embedded |
| Rated Current | 16A |
| Grounding | Non-Grounding (Note: Specific models may include grounding) |
| Application | Residential / General-Purpose |
| Standard | 83mm*83mm |
| Certification | CE, RoHS, WEEE |
| Backlight/Indication | Not applicable |
| Extension Cable Length | None |
| Is Smart Device | No |
| Shape | SQUARE |
| Dimensions (Front Plate) | 83mm (W) x 83mm (H) |
| Total Depth | 39mm (1.53in) |
| Back Box Dimensions | 58mm (W) x 34mm (H) x 26mm (D) (2.28in x 1.33in x 1.02in) |
8. User Tips
- For a seamless aesthetic, ensure the wall surface is flat before installation.
- When installing multiple units, maintain consistent orientation for a uniform look.
- Consider the specific type of socket/switch needed (e.g., with ground, without ground, number of gangs, USB ports) before purchase to match your requirements.
9. Warranty and Support
For detailed warranty information and customer support, please refer to the official product documentation or contact your retailer.
An electronic version of the user manual is available for download: