YIHUA 928D-IV

Contents

YIHUA 928D-IV C235 Smart Electric Soldering Iron

User Manual

Model: 928D-IV

Brand: YIHUA

1. Introduction

Thank you for purchasing the YIHUA 928D-IV C235 Smart Electric Soldering Iron. This portable, quick-heating soldering iron is designed for precision repairs and a broad range of soldering and desoldering operations. Please read this manual carefully before operating and keep it for future reference to ensure safe and efficient use.

2. Important Safeguards

CAUTION!!! WARNING!!!

Strictly follow the basic safety guidelines and precautions when using the product:

  • To provide continued protection against risk of electric shock, connect to properly grounded outlets only.
  • Do not immerse in water.
  • Hot Surface. Avoid Contact.
  • To provide continued protection against electric shock, disconnect from the power supply when not in use.
  • Heat gun, soldering iron, desoldering iron must be placed on its stand when not in use.
  • HOUSEHOLD AND INDOOR USE ONLY.
  • To prevent electric shock, unplug before replacing the fuse and other service.
  • Replace only with same type and rating of fuse.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance.
  • The soldering iron and desoldering iron is only to be used with the power supply unit provided with the appliance.
  • To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Store indoors. Read instruction manual before using.
  • A fire may result if the appliance is not used with care, therefore: be careful when using the appliance in places where there are combustible materials; do not apply to the same place for a long time; do not use in presence of an explosive atmosphere; be aware that heat may be conducted to combustible materials that are out of sight; place the appliance on its stand after use and allow it to cool down before storage; do not leave the appliance unattended when it is switched on.
  • To ensure personal safety, please turn off the power switch after work is completed. When not in use for an extended period, please unplug the power cord.
  • The soldering iron should only be used for soldering. Do not hit the soldering iron against the work surface to remove flux residues (Can be cleaned by the cleaning device of the product), as doing so may seriously damage the soldering iron.
  • Soldering produces fumes, ensure there is adequate ventilation.
  • After used, remember that cooling the unit, the handle should be placed on the handle holder.
  • If the bottom of the brass wool tip cleaner contains solid-state rosin, this product contains rosin (colophony), and the substance may cause an allergic skin reaction. When using the tip cleaner (rosin-inside), DO NOT inhale the fume generated or consume the solid-state rosin, DO NOT allow your skin and eyes to get in direct contact with the rosin.

Lead-Based Paint Warning

  • WARNING: Extreme care should be taken when stripping paint. The peelings, residue and vapors of paint may contain lead, which is poisonous. Any pre-1977 paint may contain lead and paint applied to homes prior to 1950 is likely to contain lead. Once deposited on surfaces, hand to mouth contact can result in the ingestion of lead. Exposure to even low levels of lead can cause irreversible brain and nervous system damage, young and unborn children are particularly vulnerable.
  • Before beginning any paint removal process you should determine whether the paint you are removing contains lead. This can be done by your local health department or by a professional who uses a paint analyzer to check the lead content of the paint to be removed.
  • LEAD-BASED PAINT SHOULD ONLY BE REMOVED BY A PROFESSIONAL AND SHOULD NOT BE REMOVED USING A HEAT GUN.
  • Persons removing paint should follow these guidelines: Move the work piece outdoors. If this is not possible, keep the work area well ventilated. Open the windows and put an exhaust fan in one of them. Be sure the fan is moving the air from inside to outside. Remove or cover any carpets, rugs, furniture, clothing, cooking utensils and air ducts. Place drop cloths in the work area to catch any paint chips or peelings. Wear protective clothing such as extra work shirts, overalls and hats. Work in one room at a time. Furnishings should be removed or placed in the center of the room and covered. Work areas should be sealed off from the rest of the dwelling by sealing doorways with drop cloths. Children, pregnant or potentially pregnant women and nursing mothers should not be present in the work area until the work is done and all clean up is complete. Wear a dust respirator mask or a dual filter (dust and fume) respirator mask which has been approved by the Occupational Safety and Health Administration (OSHA), the National Institute of Safety and Health (NIOSH), or the United States Bureau of Mines. These masks and replaceable filters are readily available at major hardware stores. Be sure the mask fits. Beards and facial hair may keep masks from sealing properly. Change filters often, DISPOSABLE PAPER MASKS ARE NOT ADEQUATE. Use caution when operating the heat gun. Keep the heat gun moving as excessive heat will generate fumes which can be inhaled by the operator. Keep food and drink out of the work area. Wash hands, arms and face and rinse mouth before eating or drinking. Do not smoke or chew gum or tobacco in the work area. Clean up all removed paint and dust by wet mopping the floors. Use a wet cloth to clean all walls, sills and any other surface where paint or dust is clinging, DO NOT SWEEP, DRY DUST OR VACUUM. Use a high phosphate detergent or trisodium phosphate (TSP) to wash and mop areas. At the end of each work session put the paint chips and debris in a double plastic bag, close it with tape or twist ties and dispose of properly. Remove protective clothing and work shoes in the work area to avoid carrying dust into the rest of the dwelling. Wash work clothes separately. Wipe shoes off with a wet rag that is then washed with the work clothes. Wash hair and body thoroughly with soap and water.

3. Product Overview

Key Features

The YIHUA 928D-IV C235 is a smart soldering iron offering rapid heating and precise temperature control. It features a clear LED display for easy monitoring and adjustment.

Smart Soldering Iron with LED display showing temperature and power, highlighting 0-450°C range and 2s fast heating.

Image: Smart Soldering Iron with LED display showing temperature and power, highlighting 0-450°C range and 2s fast heating.

Parts List

  1. Tip Cleaner
  2. Heating Element
  3. Temperature Decrease Button
  4. Temperature Increase Button
  5. Function Button
  6. Type-C Port
  7. Protocol
  8. Simulated Power Level
  9. Temperature Display
  10. Voltage Display
Diagram of the YIHUA 928D-IV soldering iron with numbered parts pointing to the tip cleaner, heating element, control buttons, Type-C port, and display.

Image: Diagram of the YIHUA 928D-IV soldering iron with numbered parts pointing to the tip cleaner, heating element, control buttons, Type-C port, and display.

4. Setup

Power Connection

This soldering iron requires a 20V Type-C power source for optimal performance. It can be powered by a compatible power bank or adaptor.

Hands connecting a USB-C cable from a power adapter to the soldering iron, illustrating the 20V Type-C power requirement.

Image: Hands connecting a USB-C cable from a power adapter to the soldering iron, illustrating the 20V Type-C power requirement.

Installing the Heating Element

The YIHUA 928D-IV uses a cartridge-type heating element for fast heating. To install, simply insert the heating element into the soldering iron body and secure it.

Hands demonstrating the insertion of a cartridge-type heating element into the soldering iron body.

Image: Hands demonstrating the insertion of a cartridge-type heating element into the soldering iron body.

Product Demonstration Video

Video: A comprehensive demonstration of the YIHUA 928D-IV, including assembly, power connection, temperature adjustment, and various soldering applications.

5. Operating Instructions

Basic Operation & Initial Use

  1. Remove the protective cover by turning it counterclockwise.
  2. Upon first use, set the temperature to 250°C/482°F. When the iron is hot enough to melt solder, coat the soldering iron tip with a layer of solder (rosin core solder is recommended). Then, set the temperature to your desired working temperature.
  3. When done using, use a damped cleaning sponge or brass wool to clean residues off the soldering tip. Then, apply a new layer of solder onto the tip.
  4. Disconnect the power cord and install the protective cover.

Temperature Adjustment

The soldering iron allows for adjustable temperatures ranging from 90°C to 450°C. Use the '+' and '-' buttons to increase or decrease the temperature. The current temperature is displayed on the LCD screen.

Digital Temperature Calibration

To ensure accurate tip temperature, you can calibrate the device:

  1. Press and hold both the temperature increase and decrease buttons simultaneously for approximately 2 seconds to enter the temperature calibration interface.
  2. Enter the measured temperature.
  3. Once the measured temperature is entered, press the function button to confirm the entry.
Three-step diagram showing how to perform digital temperature calibration on the soldering iron using the plus/minus and function buttons.

Image: Three-step diagram showing how to perform digital temperature calibration on the soldering iron using the plus/minus and function buttons.

Menu Functions

The soldering iron features a menu system for various settings. Press and hold the function button for 3 seconds to enter the menu. Use the temperature increase or decrease buttons to navigate and select settings. Press the function button again to save the selection or exit the menu.

Soldering iron display showing menu options like TempUnit, Protocol, SleepTemp, SleepTime, OffTime, DispDir, and Auto.

Image: Soldering iron display showing menu options like TempUnit, Protocol, SleepTemp, SleepTime, OffTime, DispDir, and Auto.

Available menu functions include:

  • °C-°F Conversion (Temperature Unit)
  • Charging Protocol (Auto, QC, PD)
  • Sleep Mode Threshold (Sleep Temperature)
  • Sleep Mode Countdown (Sleep Time: 5-30 minutes)
  • Automatic Shutdown Countdown (Off Time: 1-10 minutes)
  • Display Rotation (Left/Right/Automatic)

Sleep Mode (Timer-Triggered)

The sleep mode helps reduce tip oxidation, extend tip lifespan, and conserve energy. The device will enter sleep mode after a set period of inactivity.

Soldering iron in sleep mode with a timer indicating 5 minutes, highlighting benefits like reduced tip oxidation, extended tip lifespan, and energy conservation.

Image: Soldering iron in sleep mode with a timer indicating 5 minutes, highlighting benefits like reduced tip oxidation, extended tip lifespan, and energy conservation.

Automatic Shutdown (Timer-Triggered)

For user safety and to prevent the unit from being left on unattended, the soldering iron features an automatic shutdown function after a set period of inactivity.

Soldering iron in automatic shutdown mode with a timer indicating 5 minutes, emphasizing user safety and preventing unattended operation.

Image: Soldering iron in automatic shutdown mode with a timer indicating 5 minutes, emphasizing user safety and preventing unattended operation.

Application Examples

This smart soldering iron is suitable for various precision repair tasks, including soldering resistance, wire connections, circuit board work, and RC repairs.

Four images showing the soldering iron being used for various precision repairs: soldering resistance, wire connection, circuit board work, and RC repair.

Image: Four images showing the soldering iron being used for various precision repairs: soldering resistance, wire connection, circuit board work, and RC repair.

Two images demonstrating the soldering iron's application for SMD soldering and through-hole soldering on a circuit board.

Image: Two images demonstrating the soldering iron's application for SMD soldering and through-hole soldering on a circuit board.

6. Maintenance

Tip Cleaning and Care

Regular cleaning of the soldering tip is essential for optimal performance and longevity. If a layer of oxidization forms on the tip, follow these steps:

  1. Set the temperature to 300°C (572°F).
  2. Once the temperature stabilizes, gently rub the soldering iron tip inside the metal wool ball.
  3. When the oxidization is partially removed, continue applying solder onto the tip while rubbing it until the soldering tip is completely coated with solder.
  4. If the tip is too severely oxidized beyond cleaning, replace the tip with a new one.
A close-up of the soldering iron tip being cleaned with an integrated brass wool tip cleaner.

Image: A close-up of the soldering iron tip being cleaned with an integrated brass wool tip cleaner.

General Maintenance Tips

  • DO NOT use metal files to remove the oxidization on the soldering iron tip. If the soldering iron tip deforms or rusts, replace the soldering iron tip with a new tip.
  • DO NOT apply excessive force on the soldering iron tip when soldering. Doing this will NOT IMPROVE the heat transfer but damage the soldering iron tip instead.
  • When placing the soldering iron back in the holder to idle after a high-temperature operation, adjust the temperature to 250°C (482°F) or below for idling. Failure to do so, and leaving the soldering iron tip to idle on a high-temperature setting will cause the accelerated aging of the heating element, and shorten the lifespan of the heating element and soldering iron tip.
  • After every operation, always wipe off the soldering tip, then tin the tip with a layer of solder to prevent oxidization.

7. Troubleshooting

Error Codes

  • "S-E": This indicates that the soldering iron's sensor module is faulty, and the heating element (heating element and sensor module) needs to be replaced. Or the heating element is not connected.

8. Specifications

AttributeValue
Model928D IV
Rated Voltage20V DC ±10%
Rated Power60W
Control Unit DimensionsL185*W20*H20mm ±5mm
Operating Ambient Temperature0~40°C (32°F~104°F)
Temperature Range90°C~450°C (194°F~842°F)
DisplayLCD Display

Note: The rated power may decrease due to rated voltage lower than 20V (Potentially caused by the adaptor or others).

9. User Tips

  • For optimal and fast heating performance, ensure you use a 20W USB-C power source.
  • The YIHUA 928D-IV is specifically designed for C235 type heating elements. Ensure compatibility when purchasing replacement tips or elements.
  • Always allow the heating element to cool completely before attempting to replace it to avoid burns.

10. Warranty and Support

For warranty information and technical support, please refer to the product packaging or contact the seller directly. Keep your purchase receipt as proof of purchase.

11. Additional Resources

A detailed user manual in PDF format is available for further reference. You can access it via the following link: YIHUA 928D-IV User Manual (PDF).


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.