hippcron XSP-309

Contents

User Manual

Hippcron 9-inch Car Radio Multimedia Video Player

Model: XSP-309 | Brand: Hippcron

Important Cautions

WARNING:

The "WARNING" symbol is designed to notify the user of critical instructions/procedures. Failure to comply with these instructions/procedures may lead to injury, death, damage to the product, and/or property.

CAUTION:

The "CAUTION" symbol is meant to notify the user of important instructions/procedures. Failure to follow these instructions/procedures may result in injury or damage to the product and/or property.

Product Safety:

According to Federal and Local laws, it is prohibited for drivers to view video content while the vehicle is in motion. This video product is specifically designed to be used with the parking brake safety feature, which is necessary for viewing the video content. The video cannot be viewed without the proper parking brake powered connection. Any attempt to tamper or disable this safety feature will invalidate any existing warranty. To ensure that the product is installed correctly, please consult with a professional installer.

Installation Precautions:

Cartreque Digital Media Receiver suggests against self-installation of the product. It is recommended to have it professionally installed by a certified professional. Always seek advice from a professional installer before installing the product. It is strongly advised not to install or service this product by yourself. The installation or servicing of this product by individuals without professional training and experience in electronic equipment and motorized vehicle accessories can be hazardous and may pose the risk of electric shock, injury, or other hazards. Any repairs required should be directed to a qualified Cartreque Digital Media Receiver Service Center.

Before Installing:

To prevent potential electrical shorts, it is essential to disconnect the (-) battery cable before installing the product. Utilize this unit with a 12-volt battery and negative grounding exclusively. Failure to follow these guidelines could lead to a fire or malfunction.

CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.

TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO A QUALIFIED SERVICE PROFESSIONAL.

Product Overview

The Hippcron XSP-309 is a 9-inch HD touchscreen car multimedia player designed for universal compatibility. It supports various features to enhance your in-car entertainment and connectivity.

Key Features:

  • Wired USB & WiFi CarPlay, Android Auto
  • CID (Center Information Display) / RSE (Rear Seat Entertainment) Dual display
  • USB BC1.2 for smartphone fast charge
  • 1080P full HD multimedia decoder
  • 720P AHD Night Vision Backup Camera support
  • Suitable for 12V~24V vehicles
  • Bluetooth Compatible; Sirius XM Compatible; Voice Control
  • Support FM Radio
  • User-friendly Digital Control Interface
  • Support TF card & AUX IN Connectivity; USB Port Playback
  • EQ Audio Setting
  • Multiple language Settings
  • Date and Time Setting
  • Easy installation

Components:

Product overview diagram showing labeled ports and components

Diagram illustrating the various ports and components of the multimedia player, including AUX, AV In, USB, TF, Type-C, and built-in speaker.

  1. Display
  2. AUX port
  3. AV IN (For Optional Back Up Camera)
  4. USB port
  5. TF card slot
  6. DC-12V power port
  7. Mount
  8. Knob
  9. Lock
  10. Adhesive Suction Cup
  11. Power Plug
  12. Power switch button

Setup

Mounting the Unit:

  1. Insert the adhesive suction cup mount into the bracket on the back of the main unit and slide it up to lock it in place.
  2. Remove the protective film from the adhesive suction cup on the bottom of the mount.
  3. Press the suction cup onto your dashboard and push the lock down to secure it in place.
  4. Adjust the unit display angle and height so that it does not block your view of the road, and tighten the knob to secure it in place.
Diagram showing how to attach the suction cup mount to the car stereo and then to the dashboard.

Visual guide for attaching the suction cup mount and securing it to the dashboard.

Power Connection:

  1. Connect one end of the supplied power cable (Type-C) to the DC 12V power port of the device.
  2. Plug the adapter end of the power cable into your car's DC 12V power outlet.
Image showing the Type-C power cable connecting to the device and the adapter plugging into a car's 12V power outlet.

Illustration of connecting the power cable to the device and the car's power outlet.

Operating Instructions

Home Menu:

Scroll Left/Right at the bottom of the screen to navigate between pages. Apps displayed on this unit vary depending on the apps on the connected phone.

Home menu screen of the car multimedia player showing various app icons like Phone, Music, Maps, Messages, Now Playing, CarHome, Calendar, Settings.

The main interface of the multimedia player, displaying common applications.

Main Functions:

  • FM TX (FM Transmit): Transmits FM signal to the original car radio to the body speakers. Note: This function does not support FM radio reception.
  • USB: Read information from a USB flash drive.
  • TF: Read information from a TF card.
  • PhoneLink: Used for CarPlay, Android Auto, and Mirror Link functions.
  • BT (Bluetooth): Used to connect wireless functions (e.g., hands-free calls, music streaming).
  • Clock: Time setup.
  • Calendar
  • Setup: Access device settings.
  • AV IN: Used to see the view from a front camera (if connected).
  • Calculator

Wireless CarPlay Connection:

  1. Connect your iPhone's Bluetooth to the device's Bluetooth.
  2. When pairing for the first time, your phone will prompt "Use CarPlay" to confirm. Select pairing to enable wireless CarPlay connection.

Note: You can click the "CarHome" icon to return to the unit's homepage.

Image showing a phone connected to the car stereo via CarPlay, displaying navigation and music apps.

Example of CarPlay interface on the multimedia player.

Wired CarPlay Connection:

Connect your iPhone to the USB port using an Apple original/certified cable.

Wireless Android Auto Connection:

  1. Pair your mobile phone's Bluetooth with the device's Bluetooth.
  2. Confirm to use Android Auto. It will automatically connect next time.
  3. To disconnect, turn off the Wi-Fi on the car stereo.
Image showing a phone connected to the car stereo via Android Auto, displaying navigation and music apps.

Example of Android Auto interface on the multimedia player.

Wired Android Auto Connection:

Connect the phone and USB port with an Android original/certified cable.

Note: You can click the "CarHome" icon to return to the unit's homepage.

Connect your phone with the device using the original cable. When your phone prompts a notification, choose "trust" to enjoy the full HD display of video or images on the car stereo.

Image demonstrating Mirror Link functionality, showing a phone screen mirrored onto the car stereo display.

Mirror Link feature displaying a phone's screen on the car stereo.

Video demonstrating the Mirror Link feature, showing a phone's display being mirrored onto the car stereo screen for navigation and media playback.

Audio Output to Car Speakers:

This unit has a built-in speaker, but for louder sound, you can transmit audio to your car's speakers using one of the following methods:

  1. FM Radio Transmitter: Set the same FM radio channel on this machine and your car's radio. Avoid using channels occupied by existing FM stations.
  2. AUX Cable: Plug an AUX cable into the unit's audio port and your car's original AUX port (if available).
Image showing the FM Signal Transmission interface on the car stereo, with frequency selection and an 'On' button.

FM Signal Transmission interface for broadcasting audio to car speakers.

Music Play Interface:

When playing media from a U disk or SD card, the unit offers several playback options:

  • Repeat Single: Repeats the current track.
  • Repeat Chapter: Repeats the current chapter.
  • All Repeat: Repeats all tracks.
  • Random Play: Plays tracks in a random order.

Click the media playlist icon to view all contents and select music to play.

  • ⏪ Previous Song: Touch to return to the previous song.
  • ⏭ Next Song: Touch to skip to the next song.
  • ⏯ Play/Pause: Touch to pause or start playing.
  • ♫ EQ: Click to enter the sound effect interface and select EQ effects.

Use the Home Button (house icon) to return to the main menu. Use the Back Button (curved arrow) to return to the previous page.

Bluetooth Phone Interface:

From the Main Menu, navigate to the Phone icon to access the Bluetooth dialing interface. You can then make hands-free calls.

Bluetooth phone interface showing a dial pad and call options.

Bluetooth phone interface for making hands-free calls.

Backup Camera Setup:

Connect the "Astern cord" to the reverse gear signal. Connect the camera's AV IN port to the unit. Connect the camera's power to the reverse lights (+12V) and ground (GND).

Wiring diagram for connecting a backup camera to the car stereo, showing connections for reverse gear, AV IN, +12V, and GND.

Detailed wiring diagram for backup camera installation.

Car stereo display showing a reverse image with parking guidelines.

Example of the reverse image display on the car stereo.

Setting Overview

The unit's settings can be accessed to customize various features. Here's an overview of the available settings:

Settings menu screen showing options like Basic Setup, Factory Set, Sound Setup, Display settings, Background, ScreenSave, System, Language, Time Setup, Version.

Overview of the main settings menu.

  • Basic Setup: Includes options for beep sound, reverse mute, and color lamp mode.
  • Factory Set: To access advanced factory settings, input the password 779822.
  • Sound Setup: Choose different modes to adjust audio output and enjoy music.
  • Display Setup: Adjust screen brightness and other display parameters.
  • Background: Change the unit's wallpaper.
  • ScreenSave: Configure screen saver options.
  • Language: Select the operating system language, including English, Chinese, Spanish, etc.
  • Time Setup: Adjust date and time settings.
  • Version: View basic information about your unit.

Specifications

FeatureSpecification
Model NameXSP-309
Brand Namehippcron
Display Size9"
Resolution1024*600
PlacementIn-Dash
OSD LanguageEnglish
Voltage12 V
Special FeaturesRadio Tuner
Item Weight0.8 kg
Item Size222*135mm
OriginMainland China
CertificationCE
Package Length27 cm
Package Width17 cm
Package Height11 cm

User Tips

  • The screen is responsive and fluid, performing well for CarPlay and Android Auto functions.
  • The reverse camera automatically detects video input, eliminating the need for a separate activation signal.
  • For optimal performance and to avoid issues, ensure the unit is powered by a 12V battery with negative grounding.
  • If the rear camera flickers when the car is running, check the power connection to ensure it's stable and not affected by vehicle electrical fluctuations.
  • Consider using the unit without a rear camera if you experience persistent issues with the reverse camera while driving.
  • The unit primarily functions as a CarPlay/Android Auto screen; other applications are limited.
  • To prevent memory loss, ensure proper power off procedures or consult the setup menu for memory retention options.

Troubleshooting

Common Issues and Solutions:

  • Rear Camera Flickering: If the rear camera image flickers when the car is running, check the power supply to the camera and the unit. Ensure stable 12V power and proper grounding. This could be due to electrical interference or an unstable power source when the engine is on.
  • No Memory Retention: If the unit loses settings or memory after being turned off, verify the power connections, especially the constant power (B+) wire, if applicable, to ensure continuous power for memory retention.
  • Bluetooth Connection Issues: Ensure both the phone and the unit's Bluetooth are discoverable. Try unpairing and re-pairing the devices. Check for any conflicting devices or strong interference.
  • CarPlay/Android Auto Not Connecting: For wireless connections, ensure Bluetooth is paired first, then Wi-Fi. For wired connections, use original or certified USB cables. Try restarting both the phone and the car stereo.
  • No Sound from Car Speakers: If using FM transmission, ensure the unit and car radio are tuned to the same, clear frequency. If using AUX, ensure the cable is fully inserted into both the unit and the car's AUX port. Check volume levels on both the unit and the car stereo.

Warranty and Support

This product is covered by a standard manufacturer's warranty. For detailed warranty information, please refer to the official product documentation or contact your retailer.

For further assistance, technical support, or to view additional documentation, please refer to the User Manual (PDF).


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.