ShangDeLi Ford Transit 2017-2021

Contents

ShangDeLi Car Switch Instruction Manual

Model: Ford Transit 2017-2021 Compatible Button Switch

1. Product Overview

This manual provides instructions for the installation and operation of the ShangDeLi Car Switch, designed for specific functions in Ford Transit models from 2017 to 2021. This product is a button switch intended to replace existing blank switches in your vehicle's dashboard.

Key Features:

  • Direct replacement for blank reserved switches.
  • Blue LED icon backlight and Yellow indicator light (for specific functions).
  • Durable flame-retardant ABS material.
  • Designed for 12V DC vehicle power supply.

2. Specifications

AttributeValue
Product TypeButton Switch (Switches and accessories)
Input VoltageDC 12V
Rated Current1.5A
Rated Power (Max)18W
MaterialFlame-retardant ABS
Working Temperature-10°C ~ 60°C
Item Height2.7 cm
Item Width4 cm
Item Length4.2 cm
Item Weight0.03 kg
ComplianceCE Marking, RoHS Compliant

Dimensions of the switch. Note the height, width, and length for proper fitment.

Dimensions of the car switch: 2.7cm height, 4cm width, 4.2cm length.

Image: Car switch with labeled dimensions (Height: 2.7cm, Width: 4cm, Length: 4.2cm).

3. Safety Instructions (WARNING!)

  • Disconnect Battery: Always disconnect the negative terminal of the car battery before installation. Operating with power on can cause short circuits, sparks, or damage to the vehicle circuit.
  • Voltage Compatibility: This product is suitable ONLY for 12V DC vehicle power supply. DO NOT connect to 220V AC household power, as this will cause burning, fire, or electric shock.
  • Current Limit: The switch has a rated current limit (1.5A, 18W Max). High-power devices (e.g., lights, air pumps, light bars) MUST be used with a relay. Do not directly drive heavy loads to prevent overheating and burning the switch.
  • Wiring Integrity: All wiring must be firm and well-insulated. Use heat-shrink tubing or electrical tape to cover all connectors. Exposed metal is strictly prohibited to prevent short circuits and fire.
  • Waterproofing: Ensure the waterproof gasket is correctly installed and compressed during installation. Keep the switch away from high temperature, oil, and water areas for good waterproofing and heat dissipation.
  • No Disassembly: Do not disassemble or modify the internal structure of the switch yourself. This can compromise waterproof and insulation performance, leading to failure or danger.
  • Professional Guidance: Non-professionals should install this product under the guidance of automotive electricians. Incorrect wiring can damage vehicle electrical appliances, cause malfunctions, or create safety hazards.
  • Abnormalities: If the switch becomes loose, hot, smelly, noisy, or abnormal, stop using it immediately and check or replace it.
  • Vehicle Modification: This product is a car modification accessory. Installation and use must comply with local traffic laws and vehicle safety standards.

4. Setup and Installation

4.1. Preparation

  1. Disconnect the negative terminal of the car battery to cut off power.
  2. Gather necessary tools: screwdriver, wire stripper, heat-shrink tubing or electrical tape, and potentially a hole punch if drilling is required.
  3. Verify that all accessories (switch, connector with cable) are complete and intact.

4.2. Installation

  1. Locate the blank reserved switch position in your vehicle's dashboard.
  2. Insert the new switch from the front of the panel.
  3. Install the waterproof gasket, ensuring it is properly seated without deviation.
  4. Install the washer and mounting nut on the back of the switch in sequence.
  5. Tighten moderately with a screwdriver to ensure the switch is stable and the gasket is fully compressed. If drilling is necessary for a new location, select a suitable position and drill accurately.

The switch is designed to fit into existing blank slots in the dashboard, as shown in the image below.

Car dashboard with a red box highlighting the location for switch installation.

Image: Example of a car dashboard showing a blank switch slot where the new switch can be installed.

4.3. Wiring

This switch functions as an on-off switch without voltage conversion. The input voltage is the same as the output voltage (12V-24V DC). It is crucial to distinguish positive and negative poles to avoid reverse connection. Refer to the detailed wiring diagram below for specific steps.

  • 1# Yellow wire: Positive input wire
  • 2# Black Wire: Backlight negative wire
  • 5# Black Wire: Indicator negative wire
  • 6# Blue Wire: Positive output wire / Positive indicator wire
  • 7# Red wire: Icon backlight positive wire

Wrap all connectors with heat-shrink tubing or electrical tape to prevent exposed metal and short circuits.

Wiring diagram showing connections for the car switch with numbered wires and a pinout diagram.

Image: Detailed wiring diagram for the car switch, illustrating connections for positive input, backlight negative, indicator negative, positive output/indicator, and icon backlight positive wires. A pinout diagram is also included.

Rear view of the car switch showing an 8-pin connector.

Image: Rear view of the car switch, highlighting the 8-pin connector for wiring.

Side view of the car switch with attached wires.

Image: Side view of the car switch with its pre-attached wiring harness.

Packaged car switch with wiring harness in a clear plastic bag.

Image: The car switch and its wiring harness as received in packaging.

5. Operating Instructions

5.1. Power-on Test

  1. After completing the wiring, ensure all connections are firm, no wires are exposed, and there is no reverse polarity.
  2. Reconnect the negative terminal of the car battery.
  3. Toggle the switch to test if the LED indicator and the connected electrical device work normally.
  4. Observe for any signs of overheating, abnormal noise, or other irregularities.

5.2. Finishing

  1. Once the test is successful, organize the wires and secure any excess harness with cable ties to prevent winding and wear.
  2. Apply function labels (if provided) for easy identification of the switch's purpose.
  3. Double-check that the switch is securely installed and the waterproof gasket is properly sealed.

The switch features a blue LED icon backlight and a yellow indicator light to show its status (on/off).

Two car switches, one showing a blue light (off) and the other a yellow light (on).

Image: Comparison of the car switch in 'Turn Off' state (blue light) and 'Turn On' state (yellow light).

6. Maintenance

  • Regular Inspection: Periodically check the switch for any signs of looseness, damage, or wear.
  • Abnormalities: If the switch becomes loose, hot, emits a smell, makes noise, or shows any other abnormal behavior, stop using it immediately. Disconnect power and inspect or replace the switch as necessary.
  • Cleaning: Keep the switch and surrounding area clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or abrasive materials.
  • Environmental Protection: Ensure the switch remains protected from high temperatures, excessive moisture, and oil to maintain its waterproof and insulation properties.

7. Troubleshooting

Common Issues and Solutions:

  • Switch Not Functioning / No Light:
    • Check all wiring connections for firmness and correct polarity. Refer to the wiring diagram in Section 4.3.
    • Ensure the negative terminal of the car battery is securely reconnected.
    • Verify that the input voltage is 12V DC.
    • Check for any blown fuses in the vehicle's circuit related to the switch or the connected device.
    • If connecting a high-power device, confirm that a relay is correctly installed and functioning.
  • Switch Overheating or Emitting Smoke/Smell:
    • Immediately disconnect power.
    • This indicates an overload or short circuit. Re-check wiring for shorts and ensure high-power devices are connected via a relay.
    • Replace the switch if it shows signs of damage from overheating.
  • Loose Switch:
    • Tighten the mounting nut on the back of the switch.
    • Ensure the waterproof gasket is properly seated and compressed.

8. User Tips

  • Verify Compatibility: Before purchasing and installing, always confirm that the switch is compatible with your specific Ford Transit model and year (2017-2021).
  • Check Fit and Quality: Upon receiving the product, inspect its fit and overall quality to ensure it meets your expectations before proceeding with installation.
  • Switch Type: This is an on-off switch, not a momentary switch. It maintains its state (on or off) until toggled again.
  • Function Labels: Consider using custom labels if the pre-printed icons do not perfectly match your intended function, or if you choose the 'NO icon' variant.

9. Warranty and Support

For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Additional item guides and documents, including a PDF user manual, may be available for download from the product page or by contacting support. The PDF manual can be found at: User manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.