ToolKitRc M450

Contents

ToolkitRC M450 Smart Lipo Battery Charger

Model: M450 | Brand: ToolKitRc

1. Introduction

Thank you for purchasing the M450 balance charger. Please read this manual carefully before use.

To ensure you have the best experience with this product, please visit the official ToolkitRC website at www.toolkitrc.com for the latest news, information, and firmware updates for your charger.

ToolkitRC M450 charger with its retail box and included manual

Figure 1: ToolkitRC M450 Charger with Packaging

2. Safety Information

  • The M450 allows an input voltage of AC100-240V. Do not change or modify the power cable and ensure the charger is only connected to a suitable AC power outlet.
  • Do not use this product in environments with heat, humidity, flammable liquids, or explosive gas.
  • Please do not use this charger without supervision. Never leave charging batteries unattended.
  • When not using this product, please unplug the input power.
  • When using the charging function, please set a current that matches the battery. Do not set an excessive current for charging to avoid damage to the battery. Check the guidelines of your battery's manufacturer for correct charging instructions.

3. Product Description and Features

The M450 is an AC balance charger. It is compact in size yet offers high power density. It features an IPS wide viewing angle display and boasts a charging accuracy as low as 5mV.

Key Features:

  • Battery Compatibility: Charge and balance management for LiPo, LiHV, LiFe & Lion 2-4S batteries.
  • Input Power: Wide voltage input AC 100-240V, 55W.
  • Charging Performance: Maximum 5.0A charging current @MAX 50W.
  • Customizable Voltage: Lithium battery cut-off voltage can be set (TVC function).
  • Calibration: Battery voltage can be manually calibrated.
  • High Accuracy: Charging accuracy is less than 0.005V.
  • Balance Current: 200mA.
  • Display: 1.54 inch IPS full viewing angle display with high resolution (240*240 pixels).

4. Package Contents

Please check the package for the following items:

  • ToolkitRC M450 Smart Lipo Battery Charger
  • AC Power Cable (region-specific plug)
  • Quick Manual
ToolkitRC M450 charger, power cable (US plug), and quick manual

Figure 2: M450 Package Contents (US Version Shown)

5. Layout and Parts Identification

Familiarize yourself with the different parts of your M450 charger:

Diagram showing the M450 charger layout with labels for display screen, Type/Current button, heat dissipation vents, balance port, and output main port.

Figure 3: M450 Front Layout

  • Display Screen: Shows charging status, voltage, current, and settings.
  • Type/Current Button: Press and hold to select battery type (cutoff voltage). Short press to select charging current.
  • Heat Dissipation Vents: Located on the sides and back to ensure proper cooling.
  • Balance Port: Connect your battery's balance lead here.
  • Output Main Port: Connect your battery's main power lead here.
  • AC Input Port (Back): Connect the provided AC power cable here.
Close-up view of the balance port and main output port on the M450 charger.

Figure 4: Close-up of Balance and Main Output Ports

6. Setup

  1. Connect the M450 to a suitable 100-240V AC power outlet using the provided power cable.
  2. The display will show the boot logo and remain for approximately 2 seconds.
  3. After booting up, the screen will enter the main interface, showing 'Standby' status.

Tip: Every time you turn on the charger, you need to short press the 'Type/Current' button once to unlock the screen. This safety feature prevents incorrect selection of battery type and current.

7. Operating Instructions

7.1. Quick Start

  1. Connect the M450 to power as described in Setup.
  2. Short press the 'Type/Current' button to unlock the screen.
  3. Press and hold the 'Type/Current' button to select the desired cut-off voltage (battery type) for charging.
  4. Short press the 'Type/Current' button to select the desired charging current.
  5. Connect your battery's main power lead to the 'Output Main Port' and its balance lead to the 'Balance Port'.
  6. When the output main port and the balance port voltage match, the charger will automatically start charging.

7.2. Charging Settings

7.2.1. Battery Type Setting

Long press the 'Type/Current' button to cycle through and select the battery type (cutoff voltage). The available options are:

Cut-off VoltageBattery Type
4.20VLiPo
4.35VLiHV
3.85VLiPo-Storage
3.60VLiFe

Important: Choosing the wrong battery type to charge may damage the battery, the charger, and cause fire hazards. Please choose carefully. Do not use this product to charge batteries not marked with a specific type.

7.2.2. Current Setting

Short press the 'Type/Current' button to cycle through and select the charging current. The available current levels are 1.0A, 2.0A, 3.0A, and 5.0A.

Tip: When selecting the current, it is recommended to use a charging rate of 1C-2C. For example, for a 1000mAh battery, 1.0A-2.0A is recommended. This helps improve the battery's cycle life. Always consult your battery manufacturer's guidelines.

7.3. Start Charging

After setting the battery voltage (type) and current, connect the battery to the charger. The charger will detect the voltage match between the main port and the balance port and automatically begin charging.

During charging, the display will show:

  • Charging Time: Elapsed time since charging started.
  • Charging Status: Indicates 'Charging'.
  • Selected Battery Type: e.g., 4.20V for LiPo.
  • Current Battery Voltage: Total voltage of the battery pack.
  • Current Charging Current: The actual current being delivered.
  • Individual Cell Voltages: Voltage for each cell in the pack.
  • Accumulated Capacity: Total mAh charged into the battery.

Tip: When charging a 1S battery, the battery voltage needs to be provided to the balance port at the same time as the main port connection for the charger to recognize and start charging.

7.4. Terminal Voltage Setting and Manual Calibration

Before connecting to the power supply, press and hold the 'Type/Current' button to enter the calibration mode.

  • Terminal Voltage: This is the voltage after the battery is fully charged. You can modify this range by plus or minus 10mV for each battery type.
  • Calibration Voltage: If the cell voltage readings appear incorrect, use a high-quality voltage meter to measure the actual voltage. Then, set this value on the charger to match the meter for accurate voltage calibration.
  • DEFAULT: Select this option to restore factory default settings.

8. Maintenance

  • Keep the charger clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Ensure the heat dissipation vents are not obstructed during operation to prevent overheating.
  • Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
  • Inspect the power cable and battery connectors regularly for any signs of damage. Replace if necessary.

9. Troubleshooting

  • Charger not powering on: Ensure the AC power cable is securely connected to both the charger and a working power outlet.
  • Charger not starting to charge: Make sure the screen is unlocked (short press 'Type/Current' button). Verify that the battery type and current are selected. Check that both the main power lead and balance lead of the battery are correctly connected. Ensure the battery voltage is within the charger's supported range (2-4S).
  • Error message on screen: Refer to the official ToolkitRC website or support for specific error code meanings. Generally, disconnect the battery and power, then reconnect.
  • Inaccurate voltage readings: Use the manual calibration feature as described in Section 7.4.

10. Specifications

ParameterValue
Input VoltageAC 100-240V @MAX 55W
Battery TypeLiPo, LiHV, LiFe, LipoStorage (2-4S)
Charging Power1.0-5.0A @ 50W
Balance CurrentMAX 200mA @2-4S
Charging Accuracy<0.005V
DisplayIPS 1.54 inch, 240*240 resolution
Product Dimensions109mm*79mm*42mm
Product Weight230g
Individual Packing Size110mm*80mm*65mm
Individual Packing Weight310g
Dimensions of the M450 charger: 109.0mm length, 75.0mm width (bottom), 79.0mm width (top), 42.0mm height.

Figure 5: M450 Charger Dimensions

11. User Tips

  • Always double-check the selected battery type and charging current before connecting your battery to prevent damage.
  • For optimal battery health, consider charging at 1C-2C rate as recommended in the manual.
  • Keep the charger's firmware updated by checking the official ToolkitRC website regularly.

12. Warranty and Support

For warranty information, technical support, and service inquiries, please visit the official ToolkitRC website or contact your local distributor. Keep your proof of purchase for warranty claims.

Official Website: www.toolkitrc.com

13. Product Video

Video 1: Official product showcase for the ToolkitRC M450 charger, demonstrating its features and operation.

© 2024 ToolKitRc. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.