1. Product Overview
This manual provides essential information for the installation, use, and maintenance of your Engine Oil Seal Set Kit. This kit is designed as a direct replacement for the engine oil seals in compatible Lifan 110cc, 125cc, and 140cc PIT PRO Trail Quad Dirt Bikes and ATVs, offering improved sealing performance and reliability.
Model: 16182101703
Batch/Serial Number: ALI7657017839
2. Safety Information
WARNING:
- To avoid danger of suffocation, keep the product packaging (plastic bags) away from babies and children.
- Always wear appropriate personal protective equipment (PPE) such as gloves and eye protection when handling engine components and performing maintenance.
- Ensure the engine is cool and the vehicle is stable before beginning any installation or maintenance work.
- Refer to your vehicle's specific service manual for detailed engine disassembly and reassembly procedures.
3. Product Components
The Engine Oil Seal Set Kit includes 5 pieces of engine oil seals of various sizes, designed for specific locations within the engine.
4. Installation Instructions
This oil seal set is designed for direct replacement of existing engine oil seals. The installation process is generally straightforward, but requires careful attention to detail and proper tools.
- Preparation: Ensure the engine is completely cool. Disconnect the battery if necessary. Gather all required tools, including appropriate seal removal and installation tools.
- Access: Depending on the specific oil seal being replaced, you may need to remove various engine covers, components, or drain engine oil. Refer to your vehicle's service manual for precise steps to access the old oil seals.
- Removal of Old Seals: Carefully remove the old oil seals. Avoid damaging the engine casing or shaft surfaces during removal.
- Inspection: Inspect the shaft and housing bore for any damage, corrosion, or burrs that could compromise the new seal. Clean the area thoroughly.
- Installation of New Seals:
- Lightly lubricate the new oil seal's lip with clean engine oil.
- Ensure the seal is oriented correctly (usually with the spring-loaded lip facing the fluid being sealed).
- Using a seal driver or a socket of appropriate size, gently and evenly press the new seal into its bore until it is flush with the housing. Do not use excessive force or hammer directly on the seal without a proper driver, as this can damage the seal.
- Reassembly: Reinstall all removed engine components, covers, and fasteners according to your vehicle's service manual. Ensure all connections are secure and torqued to specifications.
- Post-Installation Check: Refill engine oil if drained. Start the engine and check for any leaks around the newly installed seals. Monitor fluid levels and check for leaks during initial operation.
Note: The seals are made of high-grade steel alloy material, ensuring ruggedness, corrosion resistance, and durability. They are built to meet standard specifications and factory quality control for high reliability.
5. Specifications
| Attribute | Detail |
|---|---|
| Product Name | Engine Oil Seal Set Kit Accessory |
| Model Number | 16182101703 |
| Brand | Aramox |
| Material | Steel Alloy |
| Style | O Ring |
| Standard or Nonstandard | Standard |
| OEM NO. | ATV Engine Oil Seal |
| Fitment | Lifan 110cc, 125cc, 140cc PIT PRO Trail Quad Dirt Bike ATV |
| Package Contents | 1 Set of Engine Oil Seals (5 pieces) |
| Package Dimensions (L x W x H) | 19 cm x 8 cm x 2 cm |
| Package Weight | 0.031 kg |
6. Maintenance
Engine oil seals are critical components for preventing oil leaks and maintaining engine performance. While these seals are designed for durability, regular inspection is recommended as part of your vehicle's routine maintenance schedule.
- Regular Inspection: Periodically check around engine shafts (e.g., crankshaft, camshaft, transmission shafts) for any signs of oil leakage. Early detection of leaks can prevent more significant engine damage.
- Cleanliness: Keep the engine exterior clean to easily spot any new oil leaks.
- Fluid Compatibility: Ensure that any lubricants or fluids used in your engine are compatible with the seal material to prevent premature degradation.
- Replacement: Replace oil seals immediately if any signs of leakage or damage are observed. Do not attempt to reuse old seals.
7. Troubleshooting
Most issues related to engine oil seals involve leakage. Here are common troubleshooting steps:
- Oil Leakage After Replacement:
- Incorrect Installation: The seal might be installed backward, crooked, or not fully seated. Re-check the orientation and ensure it's pressed in evenly.
- Damaged Seal: The new seal might have been damaged during installation (e.g., cut lip, bent spring). Inspect the seal carefully before installation.
- Damaged Shaft/Bore: The shaft surface or the housing bore might have scratches, nicks, or excessive wear that prevents a proper seal. Inspect these surfaces thoroughly.
- Wrong Size Seal: Ensure the correct size seal is used for the specific application.
- Persistent Leaks: If leaks persist after verifying proper seal installation, consider other potential sources of oil leaks in the engine, such as gaskets, O-rings, or cracks in the engine casing.
8. User Tips
- Verify Dimensions: Before purchasing or installing, it is crucial to verify the inner and outer diameters of the old seals to ensure compatibility with this replacement set. While this kit is specified for certain Lifan models, variations can occur.
- Gentle Installation: Avoid using excessive force during installation. A damaged seal lip or spring can lead to immediate leaks.
- Consult Service Manual: Always refer to your specific vehicle's service manual for detailed, model-specific instructions and torque specifications.
9. Manufacturer & EU Representative Information
Manufacturer:
Company Name: Guangzhou Chegeshi Automotive Supplies Co., Ltd
Full Address: Room 303, Building B, No. 24 Baishan East Road, Tonghe Street, Baiyun District, Guangzhou City
Email: 764358296@qq.com
Telephone: 86-18998405948
EU Authorized Representative:
AR Company Name: ASTERNERY SL
Full Address: BUSINESSPOINT, PASEO CASTELLANA, 257, MADRID
Email: eu-rep@besbiz.eu
Telephone: 34-1236784905
For additional information or support, please refer to the official user manual PDF available at: Engine Oil Seal Set User Manual (PDF)