1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your POKESS Carbon Canister Solenoid Valve Assembly with Hose. This component is designed for specific Ford Focus 2.0L Non-Turbo models from 2012-2018, serving as a replacement or repair part for the vehicle's evaporative emission control (EVAP) system.
The EVAP system prevents fuel vapors from escaping into the atmosphere. The carbon canister stores these vapors, and the solenoid valve controls the flow of these vapors into the engine to be burned. Proper functioning of this valve is crucial for vehicle emissions control and engine performance.
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury. Automotive repairs should ideally be performed by qualified personnel. If you are unsure about any step, consult a professional mechanic.
- Always disconnect the vehicle's battery before performing any electrical work or component replacement.
- Wear appropriate personal protective equipment (PPE), such as safety glasses and gloves.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture unnecessarily.
- Handle with care to avoid cuts or injuries from sharp edges or tools.
3. Product Overview and Components
The POKESS BV619D289HA is a complete carbon canister solenoid valve assembly, including the valve and connecting hoses, designed for a direct fit replacement.
4. Specifications
| Attribute | Value |
|---|---|
| Product Name | Carbon Canister Solenoid Valve Assembly with Hose |
| Brand Name | POKESS |
| Model Number | BV619D289HA |
| Compatibility | Ford Focus 2.0L Non-Turbo (2012-2018) |
| Function | Replacement & repair for vehicle EVAP system parts |
| Origin | Mainland China |
| Approximate Length | 43 cm (16.92 inches) |
| Package Weight | 0.18 kg |
| Package Dimensions (L x W x H) | 25 cm x 3 cm x 20 cm |
5. Installation Guide
5.1 Pre-Installation Check (Must Read)
- Verify OE Number: Confirm the Original Equipment (OE) number of this part is 100% identical to your original broken part. If the OE Number is correct, proceed with installation. If the OE Number is wrong, DO NOT install; contact the seller immediately.
- Check Package Contents: Ensure the package contains the main part (solenoid valve assembly with hose) and any stated accessories or hardware.
- Confirm Vehicle Compatibility: Double-check that the part is suitable for your specific vehicle model, year, engine type (Ford Focus 2.0L Non-Turbo 2012-2018), and intended installation position.
5.2 General Installation Steps
The following are general steps. Always refer to your vehicle's specific service manual for detailed instructions and torque specifications.
- Prepare Vehicle: Park the vehicle on a level surface, engage the parking brake, and turn off the engine. Allow the engine to cool down if it has been running.
- Disconnect Battery: Disconnect the negative (-) terminal of the vehicle's battery to prevent electrical hazards.
- Locate Old Part: Identify the existing carbon canister solenoid valve assembly. Its location can vary but is typically found near the engine or fuel tank.
- Remove Old Part:
- Carefully disconnect the electrical connector from the solenoid valve.
- Release the hose clamps or quick-connect fittings securing the hoses to the carbon canister and engine intake. Be prepared for a small amount of fuel vapor release.
- Remove any mounting bolts or clips holding the valve assembly in place.
- Carefully remove the old solenoid valve assembly.
- Install New Part:
- Position the new POKESS solenoid valve assembly in the same location as the old one.
- Secure any mounting bolts or clips.
- Connect the hoses to the carbon canister and engine intake, ensuring a secure and leak-free connection. Use the quick-connect fittings as shown in the product images.
- Reconnect the electrical connector to the solenoid valve. Ensure it clicks into place.
- Reconnect Battery: Reconnect the negative (-) terminal of the vehicle's battery.
- Test System: Start the engine and check for any warning lights (e.g., Check Engine Light) or unusual noises. Perform a visual inspection for any leaks or loose connections.
6. Operation
The Carbon Canister Solenoid Valve is an integral part of your vehicle's evaporative emission control (EVAP) system and operates automatically under the control of the engine's onboard computer (ECU). There is no direct user interaction required for its operation.
The valve opens and closes to allow stored fuel vapors from the carbon canister to be drawn into the engine's intake manifold and burned during specific engine operating conditions. This process helps reduce harmful emissions.
7. Maintenance
The Carbon Canister Solenoid Valve Assembly is generally a maintenance-free component. However, periodic inspection is recommended as part of your vehicle's overall maintenance schedule:
- Visual Inspection: During routine vehicle inspections, check the hoses for cracks, kinks, or signs of wear. Ensure all connections (electrical and hose) are secure and free from corrosion.
- Cleaning: Keep the area around the valve free from excessive dirt and debris. Do not use harsh chemicals directly on the valve or hoses.
- Functionality Check: If you experience symptoms such as a 'Check Engine' light, rough idle, or difficulty starting after refueling, it may indicate an issue with the EVAP system, including the solenoid valve. Consult a diagnostic professional.
8. Troubleshooting
If you encounter issues after installation or during vehicle operation, consider the following troubleshooting steps:
- Check Engine Light: If the 'Check Engine' light illuminates, retrieve diagnostic trouble codes (DTCs) using an OBD-II scanner. Codes related to EVAP system leaks or purge valve malfunction (e.g., P0440, P0441, P0446) may indicate an issue with this component or related parts.
- Loose Connections: Re-check all electrical and hose connections to ensure they are fully seated and secure. A loose connection can cause vacuum leaks or intermittent electrical contact.
- OE Number Mismatch: If you did not verify the OE number before installation and are experiencing issues, re-confirm that the part number matches your original component. An incorrect part will not function properly.
- Hose Integrity: Inspect the entire length of the hoses for any damage, cracks, or blockages that could affect vapor flow.
- Professional Diagnosis: If basic troubleshooting does not resolve the issue, it is recommended to seek professional automotive diagnosis.
9. User Tips
- Verify OE Number Carefully: Always double-check the Original Equipment (OE) number on your old part against the new part's specifications to ensure perfect compatibility before purchase and installation. This is crucial for proper fitment and function.
- Check Specific Model Years: While listed for 2012-2018 Ford Focus 2.0L Non-Turbo, some users have reported fitment issues with specific 2016/2017 models. Cross-reference with your vehicle's exact specifications and OE part number.
- Quality Assurance: Many users have reported good quality and effective problem resolution after installing this part.
10. Frequently Asked Questions (FAQ)
- Q: Does this fit Ford Focus part number BV619D289FJ?
- A: Please verify the full OE number on your existing part. While the base number is similar, the suffix 'FJ' versus 'HA' can indicate different revisions or specifications. Always match the exact OE number for guaranteed compatibility.
- Q: Is this compatible with a Ford Focus 2.0 2016/2017?
- A: This part is specified for Ford Focus 2.0L Non-Turbo models from 2012-2018. However, it is critical to verify the OE number from your specific 2016/2017 vehicle, as variations can occur even within the same model year range. Refer to the 'Pre-Installation Check' section.
11. Compliance Information
This section provides general examples of compliance information that may be relevant for automotive components. Specific compliance markings (e.g., CE) and related documentation may be required depending on the region and product type.
- For Automotive Parts: Compliance typically relates to vehicle safety standards, emissions regulations, and material restrictions.
- Manufacturer: SUCCESS COURIER SL
- EU Authorized Representative: CALLE RIO TORMES NUM. 1, PLANTA 1,DERECHA, OFICINA 3, Fuenlabrada. Madrid, 28947
- Importer: No. 1686-1688, 1702-1716 jinyongfu auto parts supplies city, no. 1686-16816, guangyuan east road, yuexiu district, guangzhou city, guangdong province (cannot be used as a factory)
12. Support & Warranty
For detailed product information, including any specific warranty terms, please refer to the official user manual PDF provided by the manufacturer:
If you encounter any issues or have questions not covered in this manual, please contact the seller or manufacturer for assistance. Ensure you have your product model number and purchase details ready.