EzoneTronics RM-BM3005W

Contents

EzoneTronics Wireless CarPlay Android Auto Retrofit Kit Decoder Box User Manual

Model: RM-BM3005W | Brand: EzoneTronics

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your EzoneTronics Wireless CarPlay Android Auto Retrofit Kit Decoder Box. This device integrates Apple CarPlay, Android Auto, and screen mirroring functionalities into your BMW's NBT System, enhancing your in-car entertainment and connectivity experience. Please read this manual thoroughly before installation and use.

EzoneTronics Wireless CarPlay Android Auto Decoder Box and BMW screen with CarPlay interface
The EzoneTronics Wireless CarPlay Android Auto Decoder Box integrated with a BMW NBT System display.

2. Functional Statement

  • CarPlay / Android Auto: The built-in vehicle machine interaction system for iPhone and Android phones. It cooperates with the central control knob button to provide voice command and control for phone calls, information, navigation, and music. Supports Siri voice interaction. Both wireless and wired connections are supported.
  • Reversing Video Input: The smart module can decode video and can be equipped with rear-view video input.
  • Mirroring: Supports wired and wireless mirroring functions for iPhone and Android phones.
  • USB Video Playback: Automatic media playback function. Directly insert a U disk to play video and audio media.

3. Kit Contents

The package includes the following components:

Image showing all NBT System Accessories: Power cable, RCA/USB cable, External MIC, LVDS cable, WIFI Antenna
NBT System Accessories included in the kit.
  • CarPlay Decoder Box (Main Unit)
  • Power Cable Harness
  • RCA/USB Cable
  • External MIC (Microphone)
  • LVDS Cable (1 piece)
  • WIFI Antenna

4. Installation Guide

Before starting the installation, ensure your vehicle is turned off and the battery is disconnected to prevent electrical damage. It is recommended to consult a professional if you are unsure about any steps.

4.1. Cable Connection Chart

Please follow the connection chart accurately. Incorrect connections may lead to malfunction or a black screen.

Detailed wiring diagram showing connections between original power cable, new power cable harness, head unit, screen, original LVDS cable, new LVDS cable, MIC, AV-USB cable, CarPlay box, and WiFi antenna.
Comprehensive wiring diagram for the CarPlay Decoder Box installation.

4.2. Power Cable Connection

  1. Unplug the OEM original power cable from the head unit.
  2. Reconnect the OEM power cable to the new cable harness.
  3. Plug the new cable harness into the head unit.
  4. If your car has a fiber optic cable, you will need to move the original fiber optic cable from the OEM connector to the new harness connector.
Image illustrating the transfer of fiber optics plug from original OEM connector to the new harness connector.
Detail of moving the fiber optic cable to the new harness.

4.3. LVDS Cable Connection

  1. The ORIGINAL LVDS cable from the HEAD UNIT connects to the "LVDS IN" port of the CarPlay box.
  2. The NEW LVDS cable connects from the "LVDS OUT" port of the CarPlay box to the SCREEN.

Note: Connecting the LVDS cables incorrectly will result in a black screen!

4.4. WiFi Antenna and USB-AV Cable Connection

Connect the WiFi antenna to the designated port on the CarPlay decoder box. Connect the USB-AV cable to the appropriate ports on the decoder box as indicated in the main wiring diagram (Section 4.1).

4.5. Decoder Box Placement

The CarPlay interface decoder box should be installed in an appropriate space near, or on, the OEM head unit. Ensure it is secured and does not interfere with other vehicle components.

4.6. Toggle Switch Setup (DIP Switches)

The toggle (DIP) switches are located on the back of the decoder box. These switches must be set according to your car's screen size.

Back view of the decoder box showing the location of the toggle (DIP) switches.
Location of the toggle (DIP) switches on the decoder box.

Refer to the following settings based on your BMW's screen size:

DIP switch settings for 6.5 inch screen (Setup 1) and 8.8/10.2 inch screen (Setup 2).
DIP switch configurations for different screen sizes.
Toggle Switch Settings
Screen SizeSwitch 1Switch 2Switch 3Switch 4Switch 5Switch 6Switch 7Switch 8
6.5 inch screen (Setup 1)OffOnOnOnOnOnOnOn
8.8 / 10.2 inch screen (Setup 2)OffOffOnOnOnOnOnOn

The image on page 2 of the PDF also shows visual examples of different BMW models and their screen sizes (6.5 inch, 8.8 & 10.2 inch) for 1,2,3,4 Series, 5 & 7 Series, 6 Series, X1 & X5 & X6, and X3 & X4. Ensure you identify your car model and screen size correctly before setting the DIP switches.

5. Operation Guide

5.1. Switching Between Original BMW System and CarPlay

After all cables are connected, you can switch between the original BMW interface and the CarPlay/Android Auto interfaces by long-pressing the "MENU" button on the iDrive knob.

Close-up of BMW iDrive knob with 'MENU' button highlighted.
Long-press the "MENU" button on the iDrive knob to switch interfaces.

5.2. Wireless CarPlay Connection Method

  1. On your smartphone, go to "Settings" and select "Bluetooth".
  2. Check the Bluetooth device name starting with "CAR-xxxx" (e.g., CAR-5eba).
  3. Turn on Wi-Fi on your phone and keep it on. Then, return to Bluetooth settings to connect to CarPlay.
  4. Select the Bluetooth device name "CAR-xxxx". A pairing request window will pop up. Confirm the pairing and select "Use CarPlay".

5.3. Apple Wireless Screen Mirroring

  1. In the SmartPhone Setting menu of the decoder box, select "AirPlay".
  2. On your iPhone, go to Wi-Fi settings and connect to the network named "CAR-WIFI-XXXX". The password is 66668888.
  3. After successful Wi-Fi connection, return to your iPhone's main interface, open the shortcut menu page (Control Center), and select "Screen Mirroring".
  4. From the available devices, select "AirPlay" to complete the wireless screen mirroring.

5.4. Wireless Android Auto Connection Method

  1. On your smartphone, go to "Settings" and select "Bluetooth".
  2. Check the Bluetooth device name starting with "CAR-xxxx" in the Bluetooth interface.
  3. Click on the Bluetooth name beginning with "CAR-xxxx". A pairing request will pop up; click "Pairing".
  4. After successful Bluetooth pairing, follow the Android Auto connection process on your phone screen. The system will connect automatically.
  1. On your Android phone, scan the QR code provided in the "AutoLink" section of the decoder box's SmartPhone Setting menu using a browser to download and install the AutoLink app.
  2. In the decoder box's SmartPhone Setting page, switch the "WIFI Auto Link" option to "ON".
  3. Open the downloaded AutoLink software on your phone, search for "CAR-WIFI-XXXX" and connect. Then, click "START NOW" on the phone prompt box.
  4. The media sound for AutoLink will need to connect via Bluetooth.

5.6. Audio Settings (AUX Connections)

Before using the CarPlay system, you need to set the sound input on your OEM interface to "AUX", otherwise the CarPlay/Android Auto system will not have sound.

  1. On the original BMW System, navigate to the "Multimedia" menu and click "External devices".
  2. Click on "AUX front" to activate it.
  3. Keep the setting in the original BMW system on "AUX front".

There is no need to connect the EXT-AUX cable to your car AUX port, unless your car is a BMW 3/4 series or a 1/2 series.

5.7. Call Echo Cancellation

If you experience an echo during phone calls, perform the following steps:

  1. Navigate to Settings > Audio > AEC Delay in the CarPlay decoder menu.
  2. Click the "Start Auto AEC" button.
  3. During this process, ensure the car is quiet and the volume is set to a moderate position.
  4. Wait 20 seconds for the estimation to complete.

5.8. Steering Wheel Controls

The CarPlay interface decoder box supports the following steering wheel controls:

  • Voice control button
  • Telephone button
  • Next song button
  • Previous song button
  • Volume "+" and "-" buttons

Other buttons on the steering wheel are not supported by the decoder box.

6. Specifications

FeatureDetail
Model NumberRM-BM3005W
Brand NameEzoneTronics
OriginMainland China
Package Length26 cm
Package Width15 cm
Package Height9 cm
Package Weight0.9 kg
High-concerned chemicalNone

7. Troubleshooting

If you encounter issues, please refer to the following common problems and solutions:

  • Black Screen after Installation:
    • Check LVDS cable connections. Ensure the original LVDS cable is connected to "LVDS IN" and the new LVDS cable from "LVDS OUT" goes to the screen.
    • Verify DIP switch settings match your car's screen size.
  • No Sound from CarPlay/Android Auto:
    • Ensure the OEM BMW system's audio input is set to "AUX front" (refer to Section 5.6).
    • If your car is a BMW 3/4 series or 1/2 series, ensure the EXT-AUX cable is connected to the car's AUX port.
  • Echo during Phone Calls:
    • Perform the Call Echo Cancellation procedure (refer to Section 5.7).
  • Wireless Connection Issues (CarPlay/Android Auto):
    • Ensure Bluetooth is enabled and paired correctly (CAR-xxxx).
    • For CarPlay, ensure Wi-Fi is enabled on your phone.
    • For Android Auto mirroring, ensure the AutoLink app is installed and connected to "CAR-WIFI-XXXX".
    • Disconnect any existing Bluetooth connections to the car before attempting to connect to the decoder box.
  • Software Updates:
    • The manufacturer may release software updates. Please contact EzoneTronics customer support for information on available updates and how to apply them.
  • Head-Up Display (HUD) Functionality:
    • The product description and manual do not specify support for displaying CarPlay/Android Auto content (like music or Google Maps directions) on the car's Head-Up Display. This feature is generally not supported by retrofit kits unless explicitly stated.
  • Time Registration on Car Quadrant:
    • If you are unable to register the hours on the car's instrument cluster after installation, this may be a specific integration issue. Consult the car's original manual or a BMW specialist.

If the problem persists, please gather the following information before contacting customer support:

  • The order ID
  • The car model
  • The year of the car
  • Screen size of the car
  • The toggle switch setup (DIP switch positions)
  • Pictures of the LVDS cable connection
  • The software version (found in the CarPlay decoder menu: Setting > System Version)

8. User Tips

  • Sound Quality: Users have reported that the sound quality through the AUX input is good, potentially better than standard Bluetooth connections.
  • Wi-Fi Antenna Placement: The Wi-Fi antenna is designed like a router antenna. Consider its placement carefully during installation to ensure optimal signal and avoid bulkiness, as it cannot be easily tucked away like a wire.
  • External Microphone: The car's built-in microphone may not work with the decoder box. Ensure the provided external microphone is connected for voice commands and calls.
  • Camera Connectors: Pay close attention to the labeling of camera connectors. Some users have noted that there might be identical connectors, and some labels could be in Chinese. Double-check the wiring diagram for correct connections.
  • Compatibility: This device is designed for BMW NBT Systems. Verify your BMW model and year (e.g., F30 2015) are compatible with NBT before installation. It is generally not compatible with NBT EVO ID4 unless specified.

9. Maintenance

The EzoneTronics Wireless CarPlay Android Auto Retrofit Kit Decoder Box is designed for durability and minimal maintenance. Follow these guidelines to ensure its longevity:

  • Cleaning: Keep the decoder box and its connections free from dust and debris. Use a soft, dry cloth for cleaning. Avoid liquid cleaners directly on the unit.
  • Environmental Conditions: Ensure the unit is installed in a location that is not exposed to extreme temperatures, direct sunlight, or excessive moisture.
  • Cable Integrity: Periodically check all connected cables for any signs of wear, fraying, or damage. Secure any loose connections.
  • Software: Keep the device's software updated as recommended by the manufacturer to ensure optimal performance and compatibility.

10. Warranty and Support

For detailed warranty information, please refer to the official product documentation or contact EzoneTronics customer support. The full user manual in PDF format can be found at the following link: EzoneTronics Wireless CarPlay Android Auto Decoder Box User Manual (PDF).

For technical assistance, troubleshooting, or inquiries about software updates, please contact EzoneTronics customer service directly. When contacting support, please have your order ID, car model, year, screen size, DIP switch settings, and any relevant pictures or software version information ready.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.