1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your new Malcayang Dynamic LED Side Marker Lights. These lights are designed to enhance the visibility and aesthetic appeal of your vehicle with their sequential dynamic blinking feature.
2. Safety & Warnings
Important Safety Information
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
3. Product Overview
The Malcayang Dynamic LED Side Marker Lights are designed as a direct replacement for your vehicle's original side markers. They feature a sequential amber light that flows when activated, providing a modern and distinctive look. Available in two main lens styles: Dynamic Smoked and Dynamic Crystal.
Dynamic Blinker Demonstration
Video demonstrating the sequential dynamic blinking action of both the smoked and crystal side marker lights when powered on.
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Malcayang |
| Item Type | Turn Signal |
| Interface Type | T10 (W5W/194) |
| Voltage | 12 V |
| Lumens | 2400LM |
| Light Color | Yellow |
| Lens Color Options | Glossy Smoked Black / Crystal |
| Item Weight | 0.1kg |
| Includes | One Pair (Left and Right) |
| Compatible Vehicle Brands/Model | For Opel / Vauxhall Astra J K, Crossland X, Grandland X, Insignia B, Zafira C |
Dimensions
5. Installation
Installation is designed to be straightforward, replacing the original OEM signal light. Please follow these steps carefully:
- Access Original Parts: Carefully remove the original car parts (e.g., fender liner, mirror cap) to gain access to the internal screws or clips holding the OEM side marker light.
- Remove OEM Bulb: If your original light uses a halogen bulb, gently take it off from its socket.
- Connect New Light: Insert the connector of the new dynamic LED side marker light into the OE socket. Ensure a secure connection.
- Secure New Light: Put the OE socket back into the light housing. This helps to prevent water ingress and ensures a snug fit.
- Reassemble: Reattach any car parts removed in step 1, ensuring all screws and clips are tightened appropriately.
6. Operation
Once correctly installed, the dynamic LED side marker lights will operate automatically with your vehicle's turn signal system. When the turn signal is activated, the amber LEDs will illuminate in a sequential, flowing pattern from one end of the light to the other, indicating the direction of the turn.
7. Maintenance
- Cleaning: Clean the lens with a soft, damp cloth and mild soap. Avoid abrasive cleaners or solvents that could damage the plastic.
- Inspection: Periodically check the lights for any signs of damage, loose connections, or moisture ingress.
- Replacement: LED lights have a long lifespan. If a light fails, the entire unit typically needs to be replaced.
8. Troubleshooting
- Lights not working:
- Check all connections to ensure they are secure and properly seated.
- Verify that the vehicle's turn signals are functioning correctly.
- Ensure correct polarity if applicable (though these are typically plug-and-play).
- Flickering or inconsistent light:
- Check for loose wiring or poor contact at the connectors.
- Ensure the vehicle's electrical system is providing stable 12V power.
9. User Tips
- Vehicle Compatibility: Always double-check the product's compatibility with your specific Opel/Vauxhall model and year before purchase and installation. Users have reported excellent fitment on models like the Grandland X 2019.
- Professional Installation: If you are unsure about the installation process, it is recommended to seek professional assistance to avoid damage to your vehicle or the product.
10. Frequently Asked Questions (FAQ)
- Q: How are these side marker lights installed?
- A: Installation involves removing the original car parts to access the OEM signal light, then replacing it with the new dynamic LED unit. Please refer to the 'Installation' section (Section 5) for detailed steps and diagrams.
- Q: What vehicles are these compatible with?
- A: These lights are compatible with various Opel and Vauxhall models, including Astra J K, Crossland X, Grandland X, Insignia B, and Zafira C. For a complete list and specific details, please refer to the 'Specifications' section (Section 4).
11. Warranty & Support
For detailed warranty information and customer support, please refer to the official product documentation. A user manual in PDF format is available for download, which may contain additional information regarding warranty terms and support contacts. You can find the 'Item guides & documents' section on the product page, which includes a link to the User manual (PDF).
12. Manufacturer Information
Company Name: Guangzhou yangchi auto parts co.LTD
Address: CN-2 # 1003 min jie ke chuang, minying ke ji yuan, tai he zhen, baiyun district, Guangzhou
E-Mail: ouyan99@dingtalk.com
Telephone: 86-18102513142
13. EU Authorized Representative
Company Name: CET PRODUCT SERVICE LTD
Address: Osterholzallee 144, 71636 Ludwigsburg Germany
E-Mail: info.cetservice@gmail.com
Telephone: +4971416432236
14. Compliance Information
eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main, Germany
contact@evatmaster.com
OST_EU_20220224000026
We simply act as EC representative for cross-border sellers, and are not manufacturers/importers/distributors for the product, nor involved in the manufacture/import/sale of the product. Therefore, we are not responsible for any after-sales services related to the product. In case of any product quality or infringement issues, the manufacturer/importer/seller shall be solely held responsible.
NOTE: This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.