Introduction
This manual provides essential instructions for setting up, operating, maintaining, and troubleshooting your IOWODO Smart Watch. Please read this guide thoroughly to ensure proper use and to maximize your device's potential.
1. Setup
1.1 Package Contents
Before you begin, please verify that all items are present in your package:
- IOWODO Smart Watch
- Strap (2 pieces)
- Charging Cable (1 piece)
- User Manual (this document and a PDF version)
1.2 Watchband Assembly/Disassembly
To attach or remove the watchband:
- Locate the pin button on the watchband.
- Rotate the pin button and lift the watchband to remove it.
- To attach a new watchband, reverse the procedure, ensuring the pin button locks securely into place.
1.3 Charging the Watch
Before first use, fully charge your R30Pro Smart Watch. It is recommended to use a conventional charger above 5V for charging, not the USB interface on a computer terminal.
- Place the magnetic charger on the magnetic charging points of the watch.
- The screen will show charging progress.
- Once fully charged, remove the charger.
Specifications:
- Charging voltage: 5V
- Charging time: 2 hours
- Battery capacity: 300mAh
- Battery life: 5-6 days
1.4 App Installation (Da Fit)
To unlock all features, install the "Da Fit" app on your smartphone.
- Download the "Da Fit" app from the Apple App Store or Google Play Store.
- Alternatively, scan the QR code below with your smartphone's camera to download the app.
1.5 Device Binding
After installing the app, bind your watch to your smartphone:
- Open the Da Fit app.
- Click on "ADD A Device".
- Enable Bluetooth on your mobile phone.
- Select the MAC address corresponding to your watch for connection.
- Select "pair" for pairing, and the binding will be successfully completed.
Note: The distance between the mobile phone and the watch should be kept less than 10 meters. Please update the APP interface in case of disconnection.
2. Operating Your Smart Watch
2.1 Controls
Power Button:
- Press: Wake up the screen, return to the home screen, enter the menu interface.
- Hold: Power on/off the watch.
Sport Button:
- Press: Wake up the screen, enter the sport interface, pause/resume the sport.
Touch Screen:
- Hold: Hold the home screen to change the watch face.
- Swipe: Swipe to go to different interfaces.
- Tap: Tap to enter a function.
- Swipe Right: Swipe the screen to the right to return to the previous interface.
2.2 Core Features
Display & Watch Faces
The watch features a 1.85-inch TFT high-definition LCD. You can customize your watch face using your own photos via the Da Fit app.
- Brightness Adjustment: Adjust the screen brightness in the watch settings.
- Screen Off Time: Set the screen-off duration according to your preferences.
- Multiple Dials: Choose from various built-in watch faces or customize your own through the app.
Voice Assistant & Smart Calls
The watch supports AI voice commands and Bluetooth calls, allowing for hands-free communication.
- Voice Assistant: Tap to talk and get intelligent answers (e.g., "What's the weather today?").
- Answer/Dial Call: Enable or disable the function to answer calls on the watch. You can also reset call logs and contacts.
Notifications
Receive alerts for various events directly on your watch. Ensure the Da Fit app is running on your phone and notification reminders are enabled in the app settings.
- The message notification interface can display a maximum of 10 messages.
- Each message is limited to 76 characters.
- Other notifications include Weather, Music Control, Alarm Clock, Breathe reminders, and Menstrual Cycle tracking.
Health Monitoring
Monitor your vital health metrics throughout the day.
- Heart Rate Monitor: Track your heart rate.
- Blood Oxygen Monitor (SpO2): Monitor your blood oxygen levels.
- Sleep Monitor: Analyze your sleep patterns.
- Stress Monitor: Keep track of your stress levels.
Activity Tracking & Sports Modes
The watch supports over 100 sports modes to help you stay healthy and track your fitness progress.
- Activity Tracked: Steps Tracker, Distance Tracker, Calorie Tracker, Activity Tracker.
- Sports Modes: Over 100 modes including Walking, Running, Yoga, Badminton, Baseball, Cycling, Skiing, Football, Skipping, Mountaineering, Swimming, and more.
2.3 Advanced Settings
Access the "Settings" menu on your watch to configure various options:
- Vibrate & Ring: Set up alert modes for notifications (Vibration only, Vibration & Ring, Mute).
- DND Mode (Do Not Disturb): Enable this mode to disable message notifications and call reminders.
- Low Power Mode: Activate to disable vibration and the "raise wrist to brighten screen" function, and reduce screen brightness to save power.
- System:
- Restart: Restart your watch.
- Power Off: Turn off your watch.
- Reset: Reset your watch to factory settings. All data and settings will be erased.
- About: View device information including device name, Bluetooth name, and version.
3. Maintenance
3.1 Waterproofing
The IOWODO Smart Watch has a "Life Waterproof" grade, rated IP68 for water and dust resistance up to 10 meters.
Important: If your watch gets wet, clean and dry it thoroughly before putting it back on your wrist.
3.2 Cleaning and Care
- Regularly clean your watch and watchband to prevent skin irritation.
- Avoid prolonged contact with irritants such as sweat, soap, and other chemicals.
- If you have known allergies, pay special attention when wearing the watch.
3.3 Band Care
The watchband is made of TPU material, which is softer and more comfortable to wear. The band is detachable for cleaning or replacement.
User Tip: Prolonged wearing and pressure can cause skin irritation, so take off your watch regularly to give your wrist a rest.
4. Troubleshooting
4.1 Connection Issues
- Watch not connecting to app: Ensure Bluetooth is enabled on your phone and the watch is within 10 meters. Check if the Da Fit app is running in the background.
- Disconnection: If the watch frequently disconnects, try updating the Da Fit app to the latest version.
4.2 Battery and Charging
- Watch not charging: Ensure the magnetic charger is correctly aligned with the charging points on the watch. Use a 5V conventional charger.
- Short battery life: Activate "Low Power Mode" in settings to extend battery life by disabling vibration, raise-to-wake, and reducing brightness.
4.3 General Issues
- Watch unresponsive: Try restarting the watch via the "System" settings.
- Persistent problems: If issues persist, consider performing a factory reset (Note: this will erase all data).
5. Specifications
| Feature | Specification |
|---|---|
| Brand Name | iowodo |
| Model | Smart Watch |
| Display Size | 1.85 Inch |
| Resolution | 240*284 |
| Screen Material | TFT |
| Dial Window Material Type | Coated Glass |
| Case Material | Alloy |
| Band Material | TPU |
| Band Length | 200mm |
| Band Width | 20mm |
| Weight | 26g |
| Waterproof Grade | Life Waterproof (IP68, 10 meters) |
| Battery Capacity | 220-300mAh (typically 300mAh as per image) |
| Battery Life | 5-6 days |
| Bluetooth Version | 5.0 |
| CPU Model | Realtek 8763EWE |
| RAM | <128MB |
| ROM | <128MB |
| Compatibility | All Compatible (Android Wear system) |
| Metrics Measured | Heart Rate Monitor, Blood Oxygen Monitor, Sleep Monitor, Stress Monitor |
| Activity Tracked | Steps Tracker, Distance Tracker, Calorie Tracker, Activity Tracker |
| Languages | English, Russian, Spanish, Portuguese, Turkish, Italian, French, German, Hebrew, Arabic, Indonesian |
| Certification | CE, FCC, RoHS |
6. User Tips
- Skin Comfort: To prevent skin irritation, ensure your watch is clean and dry. Avoid wearing it too tightly, and take it off regularly to allow your skin to breathe.
- Connectivity: For stable Bluetooth connection, keep your smartphone within 10 meters of the watch. If you experience frequent disconnections, check for and install any available updates for the Da Fit app.
- Battery Optimization: If you need to extend battery life, enable "Low Power Mode" in the watch settings. This will disable vibration, the raise-to-wake feature, and reduce screen brightness.
- Charging Best Practice: Always use a 5V conventional charger for optimal charging, rather than a computer's USB port, to ensure efficient and safe charging.
7. Warranty and Support
The IOWODO Smart Watch comes with a 1-year warranty, ensuring quality and reliability.
For more detailed instructions, diagrams, and comprehensive information, please refer to the official user manual PDF:
For further assistance, please contact IOWODO customer support.