CNSPEED YC101162

Contents

CNSPEED 60MM Car Turbo Boost Gauge Instruction Manual

Model: YC101162

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your CNSPEED 60MM Car Turbo Boost Gauge. Please read this manual thoroughly before installation and use to ensure proper function and safety.

CNSPEED 60MM Car Turbo Boost Gauge

Figure 1: CNSPEED 60MM Car Turbo Boost Gauge (Front View)

2. Package Contents

Please check the package contents upon receipt:

  • 1 x Turbo Boost Gauge (60mm diameter)
  • 1 x Boost Sensor
  • 1 x English Manual (PDF version available online)
  • Mounting hardware (screws, O-ring)
  • Wiring harness
  • Vacuum hose
Package Contents of CNSPEED Turbo Boost Gauge

Figure 2: Contents included in the package

3. Setup and Installation

Professional installation is highly recommended for this product. Ensure the vehicle's power is disconnected before beginning installation.

3.1. Gauge Dimensions

Dimensions of CNSPEED Turbo Boost Gauge

Figure 3: Gauge dimensions (all measurements in mm)

3.2. Part Names and Views

Installation Instructions Electrical Gauges Display

Figure 4: Installation Instructions and Wiring Diagram for Electrical Gauges

Refer to Figure 4 for visual guidance during installation. The gauge features a 270° scale display.

Gauge Components:

  • Back View: Sensor Wire, Shift Lamp, Power Wire.
  • Part Names: Visor, Set Key, Meter Cupholder, Meter, Buffer.
  • Front View: Meter, Visor, Peak LED (Blue), Warning LED (Red), Meter Cupholder.

3.3. Wiring Connections (Turbo Boost Gauge)

Ensure all connections are secure and insulated.

  • Power Wire (Red): Connect to Battery (+) 12V.
  • Power Wire (White): Connect to Lights Switch 12V (+).
  • Power Wire (Black): Connect to Battery (-).
  • Ignition Wire (Yellow): Connect to Ignition Switch 12V (+).
  • Sensor Connection: Connect the boost sensor to the designated sensor input on the gauge.

3.4. Boost/Vacuum Sensor Installation

The boost sensor connects to the vehicle's intake manifold or a suitable vacuum/boost source via the provided hose. Ensure the hose is free from kinks and securely fastened to prevent leaks.

4. Operating Instructions

Once installed and powered, the gauge will display the turbo boost pressure in Kpa. The gauge features dual backlighting (white and red) for visibility in various conditions.

  • Reading the Gauge: The pointer indicates the current boost pressure. The scale ranges from 0 to 2 (x100kpa).
  • Backlight: The gauge illuminates with either white or red light, selectable via the wiring or a switch (if wired for it). This allows for easy reading in darkness.
  • Peak LED: The blue Peak LED indicates the highest boost pressure reached.
  • Warning LED: The red Warning LED may illuminate under certain conditions (check specific wiring for warning trigger).
Red and White Lighting of CNSPEED Turbo Boost Gauge

Figure 5: Gauge displaying red and white backlight options

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the gauge face. Do not use abrasive cleaners or solvents.
  • Connections: Periodically check all wiring and sensor connections to ensure they are secure and free from corrosion.
  • Sensor Hose: Inspect the vacuum/boost hose for cracks, leaks, or kinks that could affect accuracy. Replace if necessary.

6. Troubleshooting

  • Gauge Not Lighting Up: Check power (Red, White, Yellow) and ground (Black) connections. Ensure the vehicle's ignition is on.
  • Gauge Not Displaying Correctly: Verify the boost sensor is properly connected and functioning. Check the vacuum/boost hose for leaks or blockages.
  • Inaccurate Readings: Ensure the sensor hose is correctly routed and free from kinks. Verify the sensor itself is not damaged.
  • Gauge Flickers: Check for loose wiring connections or poor ground.

7. Specifications

FeatureSpecification
ModelYC101162
Condition100% New
ColorBlack Face / White Light & Red Light
PowerDC 12V Professional
Diameter2.5 inches / 60mm
UnitKpa
Measurement Range0 ~ 2 (x100kpa)
Universal FitMost 12Volt Cars
MaterialABS
Item Weight0.45 KG
Item Dimensions (H x W x L)60mm x 60mm x 60mm
Placement on VehicleFront
OriginMainland China

8. User Tips

  • For optimal visibility, consider the placement of the gauge to avoid glare during different times of day.
  • Ensure all wiring is neatly routed and secured to prevent interference or damage.
  • If you are unsure about any step of the installation, consult a professional automotive technician.

9. Warranty and Support

For any issues or questions regarding your CNSPEED Turbo Boost Gauge, please contact your seller or the manufacturer's customer support. Keep your purchase records for warranty claims.

A detailed user manual in PDF format is available for download. Please refer to the product page for the link: User Manual (PDF)

© 2024 CNSPEED. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.