1. Introduction
Thank you for choosing TEENRAM Xenon HID Headlight Bulbs. These high-performance bulbs are designed to provide superior illumination, enhancing visibility and safety during night driving. Featuring advanced xenon technology, these bulbs offer exceptional brightness, durability, and a wide range of color temperatures to suit your preferences. Please read this manual carefully before installation and use to ensure optimal performance and safety.
2. Safety Information
- High Voltage Warning: Xenon HID systems operate at high voltages. Exercise extreme caution during installation and handling. Always ensure the vehicle's power is off and the system has cooled down before touching any components. Refer to the warning label on the bulb base.
- Professional Installation Recommended: If you are unsure about any step of the installation process, it is highly recommended to seek professional assistance.
- Eye Protection: Avoid looking directly at the illuminated bulb, as the intense light can cause eye damage.
- FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, or consult the dealer or an experienced radio/TV technician for help.
3. Package Contents
Your package should contain the following items:
- 2 x TEENRAM Xenon HID Headlight Bulbs
4. Installation Guide
These bulbs feature a non-polarity design for easier installation. However, proper handling and connection are crucial.
- Preparation: Ensure your vehicle's engine is off and the headlights are cool. Disconnect the negative terminal of your car battery for safety.
- Access Headlight Assembly: Depending on your vehicle model, you may need to remove certain components (e.g., battery, air intake, or fender liner) to access the rear of the headlight assembly.
- Remove Old Bulb: Disconnect the wiring harness from the existing HID bulb. Unclip or twist to remove the old bulb from its housing. Handle the old bulb carefully, especially if it's a xenon bulb, as it may contain mercury.
- Install New Bulb: Carefully insert the new TEENRAM Xenon HID bulb into the headlight housing. Ensure it is seated correctly and securely. The bulb base features a buckle display for proper alignment. Do not touch the glass part of the bulb with bare hands; use gloves or a clean cloth.
- Connect Wiring: Reconnect the wiring harness to the new bulb. Ensure a secure connection.
- Test Functionality: Reconnect the car battery. Turn on your headlights to test the new bulbs. Check for proper illumination and ensure there are no error messages on your dashboard.
- Reassemble: Reinstall any components removed during step 2.

Figure 4.1: Bulb dimensions and high voltage warning. D1S, D1R, D3S are typically the same size.
5. Operation
Once installed, your TEENRAM Xenon HID Headlight Bulbs will provide powerful and consistent illumination. These bulbs are designed to light up the road effectively, contributing to safer driving conditions.
- Instant Brightness: Xenon bulbs typically reach full brightness within a few seconds after activation.
- All-Weather Performance: With an IP68 waterproof rating and an operating temperature range of -40°C to +105°C, these bulbs are designed to perform reliably in various weather conditions including sleet, snow, rain, and fog.
- Color Temperature Selection: You can choose from a variety of color temperatures (3000K to 12000K) to match your aesthetic preference and driving conditions.

Figure 5.1: Visual representation of different color temperatures (6000K, 8000K, 10000K) and their lighting effects.

Figure 5.2: IP68 waterproof function ensures reliable operation in extreme temperatures and wet conditions.
6. Maintenance
TEENRAM Xenon HID Headlight Bulbs are designed for long-lasting performance with minimal maintenance.
- Cleaning: If necessary, gently wipe the glass part of the bulb with a clean, lint-free cloth. Avoid using abrasive cleaners or solvents.
- Inspection: Periodically check your headlights for proper function. If you notice any dimming or flickering, refer to the troubleshooting section.
- Durability: The bulbs are constructed with high-quality PPS material, high-temperature resistant metal shells, and durable alloy electrodes, ensuring resistance to corrosion and high temperatures for an extended lifespan.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulbs flicker or cause dashboard error lights | Vehicle's CANBUS system detects non-standard load. | Your car may require additional resistor cancelers/decoders. These can be purchased separately and installed in line with the bulb wiring. |
| No light from bulb | Loose connection, faulty bulb, or power issue. | Check all connections. Ensure the bulb is correctly seated. Test with another known working bulb if available. Check vehicle's fuse box. |
| Radio interference | Electromagnetic interference from the HID system. | Increase separation between headlight components and radio antenna/receiver. Ensure proper grounding. Consult a professional if issues persist. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | TEENRAM |
| Socket Type | D1S, D2S, D3S, D4S |
| Light Source | CSP Chip |
| Color Temperature | 3000K, 4300K, 5000K, 6000K, 8000K, 10000K, 12000K |
| Wattage | 300W/set |
| Lumen | 26000Lm/set |
| Voltage | DC 9-24V (Rated 12V) |
| Rated Current | 1.5A-10A |
| Working Temperature | -40°C to +105°C |
| Lifespan | >50000 Hours |
| Waterproof Rating | IP68 |
| Cooling | 12000 RPM Fan Design |
| Certification | CE, FCC, RoHS |
| Origin | Mainland China |

Figure 8.1: Excerpt from the product manual showing detailed specifications.
9. User Tips
- Users have reported high satisfaction with the brightness and overall light quality provided by these bulbs.
- The 300W rating indicates a very high power output, contributing to the super bright illumination.
- Consider your local regulations regarding headlight color temperature. While a wide range is available, some regions may have restrictions on very high (blueish) or very low (yellowish) color temperatures for road use.
10. Warranty and Support
TEENRAM Xenon HID Headlight Bulbs come with a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures your product performs as expected under normal use.
For technical support, warranty claims, or further assistance, please contact your retailer or the TEENRAM customer service department.
An additional user manual in PDF format can be viewed or downloaded from: TEENRAM Xenon HID Bulbs User Manual (PDF)