1. Product Overview
This manual provides detailed instructions for the safe installation, operation, and maintenance of your new ludengchaoshi Modern Ceiling Fan with LED Light. Please read this manual thoroughly before installation and keep it for future reference.

Figure 1: Modern Ceiling Fan with LED Light in a bedroom setting.
Key Features:
- DC Motor for quiet and efficient operation.
- Integrated LED Light with three color temperatures (cool, natural, warm).
- Large Air Volume for effective cooling and heating.
- Remote Control for convenient operation.
- Dual Modes: Downward airflow for summer cooling, upward airflow for winter heat dissemination.

Figure 2: LED light with adjustable color temperatures.

Figure 3: Dual airflow modes for year-round comfort.
2. Safety Rules
- To reduce the risk of electric shock, ensure electricity is turned off at the circuit breaker or fuse box before starting.
- All wiring must be in accordance with the National Electrical Code and local electrical codes. Electrical installation must be performed by a qualified and licensed electrician.
- WARNING: To reduce the risk of electric shock and fire, do not use this fan with any solid-state fan speed control device.
- WARNING: To reduce the risk of fire, electric shock, or personal injury, mount to an outlet box marked "Acceptable for Fan Support of 45 kg (99.12 lb) or less" and use the mounting screws provided with the outlet box. Most outlet boxes commonly used for light fixture support are not acceptable for fan support and may need to be replaced. Due to the complexity of this fan's installation, a licensed and qualified electrician is highly recommended.
- The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 45 kg. Use only UL listed outlet boxes marked FOR FAN SUPPORT.
- The fan must be mounted with a minimum of 7 feet (2.1 meters) of clearance from the trailing edge of the blades to the floor.
- Avoid placing objects in the path of the blades.
- To prevent personal injury or damage to the fan and other objects, be careful when working around or cleaning the fan.
- Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or a slightly dampened cloth will be suitable for most cleaning.
- After making electrical connections, spliced conductors should be turned upward and pushed carefully into the outlet box. Wires should be separated with the grounded conductor and the equipment grounding conductor on one side of the outlet box.
- Electrical diagrams are for reference only.
- The fan is suitable for indoor use only.
3. Before Installation
Package Contents:
Unpack your fan and check the contents. You should have the following:
- Hanger
- Motor
- Motor Housing
- Fan Blades (3)
- Blade Screws
- Decorative Cover
- Receiver
- Remote Control
- Screw Kits (various types)
Required Tools:
- Phillips Screwdriver
- Flat-head Screwdriver
- Adjustable Wrench
- Step Ladder
- Wire Cutters
- Electrical Tape
4. Installation Guide
Watch the installation video for a visual guide:
Video 1: Step-by-step installation guide for the ceiling fan.
4.1. Install the Mounting Bracket
To prevent personal injury and damage, ensure the hanging location allows the blade a clear space of 7.5 feet (2.3 meters) from the floor and 18 inches (45.72 centimeters) from any wall or obstruction.
For Concrete Ceilings:
- First, mark the location for the ceiling fan.
- Drill two holes in the ceiling to help secure the ceiling support with two provided expansion screws.
- Secure the mounting bracket to the building structure with the two provided expansion screws.
- Tighten the screws.
For Wooden Ceilings:
- First, mark the location for the ceiling fan.
- Secure the mounting bracket to the building structure with the four provided wood screws.
NOTE: The hanger after installation must be able to support a weight of 45 kg (99.12 lb) or more.
4.2. Receiver Installation
- Install the motor: Unscrew the four screws from the ceiling mounting bracket, connect the bracket and fix it to the motor with the screws.
- Install the remote control receiver: Connect the motor wires and receiver wires to the corresponding colors. (Please refer to the remote control manual for specific wiring details).
- Install the cover: Place the cover on the motor, turn it clockwise and secure it to the mounting bracket.
4.3. Electrical Connections
Make electrical connections from the house and the motor to the remote receiver as shown in the diagram below. Ensure the remote receiver matches the same control code.

Figure 4: Wiring Diagram. Note: The remote receiver must match the same control code.
| From House | To Receiver | From Receiver | To Fan |
|---|---|---|---|
| Live Light Wire (Azul/Blue) | Live Light Wire (Azul/Blue) | Motor Wire (Rosa/Pink) | Motor Wire (Rosa/Pink) |
| Neutral Light Wire (Blanco/White) | Neutral Light Wire (Blanco/White) | Motor Wire (Gris/Gray) | Motor Wire (Gris/Gray) |
| Live (Oscuro/Dark) | Live (Oscuro/Dark) | Motor Wire (Rojo/Red) | Motor Wire (Rojo/Red) |
| Red or White Wire | Red or White Wire | Antenna Cable | Antenna Cable |
4.4. Fan Blade Installation (Without Lamp)
- Fix each fan blade to the motor using the provided screws. Ensure all three blades are securely attached.
- Tighten the decorative cover over the motor.
- Complete the installation.
4.5. Lamp Kit Installation (With Lamp)
- After securing the fan blades, install the lamp kit. (Ensure the blades are not installed in the opposite direction).
- After securing the lamp kit, insert the ends of the LED cable into the corresponding ports.
- Finally, turn the glass cover clockwise to tighten it and check if it is loose.
5. Operating Instructions
Remote Control Functions:
- 3-Color Dimming: Adjust the LED light to cool, natural, or warm light.
- 6-Speed Regulation: Control the fan speed from low to high.
- Intelligent Timing: Set a timer for the fan to turn off automatically.
- Forward and Reverse Rotation: Switch between summer (downward airflow) and winter (upward airflow) modes.
Dual Mode Operation:
- Summer Mode: Set the fan to downward airflow to quickly cool down the room.
- Winter Mode: Set the fan to upward airflow to quickly disseminate heating throughout the room.
6. Maintenance
To ensure the longevity and optimal performance of your ceiling fan, follow these maintenance guidelines:
- Cleaning: Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or a slightly dampened cloth will be suitable for most cleaning.
- Regular Checks: Periodically check all screws and connections to ensure they are tight and secure. Loose connections can cause noise or malfunction.
7. Troubleshooting
Fan Does Not Start:
- Check the circuit fuses or breakers.
- Check the connections of the line wires to the fan and the switch wires in the switch housing. CAUTION: Ensure main power is off before checking connections.
- After turning on the fan, if the remote control does not respond and the fan beeps, do not press the remote control multiple times. Turn off the power immediately and check if the cable between the motor and the receiver is loose. Or disassemble and reinstall it.
Fan Sounds Noisy:
- Ensure all motor housing screws are tight.
- Ensure the screws holding the fan blade support to the motor hub are tight.
- Ensure the wire nut connections are not rubbing against each other or against the inside wall of the switch housing. CAUTION: Ensure main power is off before checking connections.
- Allow a "break-in" period of 24 hours. Most noises associated with a new fan will disappear during this time.
- If using an optional light kit, ensure the screws holding the glass are tight. Also check that the bulb is secure.
- Some fan motors are sensitive to solid-state variable speed control signals. If you have installed this type of control, choose and install another type of control.
- Ensure the upper canopy is a short distance from the ceiling. It should not touch the ceiling.
- If the above method still does not solve the problem, please contact the manufacturer.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | ludengchaoshi |
| Model Number | XG-Ceiling fan lights |
| Item Type | Ceiling Fans |
| Style | Modern Style |
| Material | Iron ABS plastic |
| Number of Blades | 3 |
| Light Source | LED |
| Is Bulbs Included | Yes |
| Is Dimmable | No (but 3 color temperatures) |
| Luminous Flux | 2000-82000 |
| Control Method | REMOTE CONTROL |
| Power Source | AC |
| Certification | RoHS, FCC, CE |
| Origin | Mainland China |
| Dimensions (Height) | 8.7 inches / 22 cm |
| Dimensions (Diameter) | 42 inches / 106 cm or 52 inches / 132 cm (depending on model) |
| LED Light Wattage | 18W (for 42-inch model) / 24W (for 42-inch model with 106cm diameter) |
| Recommended Room Size | 12ft x 12ft to 18ft x 18ft (8-18m²) |

Figure 5: Fan dimensions and room recommendations.
9. User Tips
- For optimal comfort, experiment with both summer and winter modes to find the best airflow direction for your room's temperature.
- If you experience any remote control issues, first check the battery. If problems persist, ensure the receiver is correctly installed and paired.
- Regularly dust the fan blades and motor housing to maintain efficiency and prevent dust buildup.
10. Warranty and Support
This product comes with a 1.8-year warranty. For any issues not resolved by the troubleshooting guide or for further assistance, please contact the manufacturer or your retailer.
A detailed user manual in PDF format is also available for download: View User Manual (PDF)