amagi Universal Automotive Heated Seat Cushion

Contents

Amagi 12V Universal Heated Car Seat Cover User Manual

Model: Universal Automotive Heated Seat Cushion

1. Introduction

This manual provides detailed instructions for the safe and effective use of your Amagi 12V Universal Heated Car Seat Cover. Please read this manual thoroughly before installation and operation to ensure optimal performance and safety.

2. Safety Information

  • Avoid prolonged continuous use of the heated seat cover.
  • Do not fold or compress the heating wires. This can damage the internal elements and pose a fire hazard.
  • Always turn off the power after use and unplug the device when not in use or when leaving the vehicle.
  • Ensure the power connection is secure to prevent intermittent heating or electrical issues.
  • Keep the product away from water or excessive moisture.
  • Do not attempt to repair or modify the product yourself. Contact customer support for assistance.

3. Package Contents

Your package should contain the following items:

  • Heated Car Seat Cover(s) (Quantity may vary based on purchase, e.g., 1 or 2 pieces)
  • 12V Cigarette Lighter Power Adapter with integrated fuse and dual control switches (HI/OFF/LO HEAT)
12V power adapter and dual control switches
Figure 1: 12V Power Adapter with HI/OFF/LO Heat Control Switches
12V cigarette lighter plug with fuse
Figure 2: 12V Cigarette Lighter Plug with Fuse

4. Setup and Installation

  1. Position the Seat Cover: Place the heated seat cover on your car seat, ensuring it is centered and aligned properly.
  2. Secure the Cover: Use the elastic straps and hooks to secure the seat cover to your car seat. Attach the straps around the backrest and under the seat to prevent movement.
  3. Connect Power Cable: Locate the power cable connection point at the bottom of the seat cover. Connect the power cable from the 12V adapter to this point.
  4. Plug into 12V Outlet: Plug the 12V cigarette lighter adapter into your vehicle's 12V power outlet.
Elastic straps and hooks for securing the seat cover
Figure 3: Elastic Straps and Hooks for Securing
Power cable connection point on the seat cover
Figure 4: Power Cable Connection Point

5. Operating Instructions

  1. Activate Heating: With the 12V adapter plugged in, turn on the switch located on the power cable to activate heating.
  2. Select Temperature: Choose the appropriate temperature setting (HI or LO) using the switch.
  3. Enjoy Warmth: Sit on the seat to enjoy the comfortable warmth.
  4. Turn Off: When finished, switch the control to 'OFF' and unplug the adapter from the 12V outlet.
Internal heating element layout within the seat cover
Figure 5: Internal Heating Element Layout

6. Maintenance

  • To clean the seat cover, gently wipe with a damp cloth. Do not immerse in water.
  • Ensure the seat cover is completely dry before storing or reusing.
  • Store in a cool, dry place, unfolded, to prevent damage to heating elements.
  • Regularly check the power cable and plug for any signs of wear or damage.
Anti-slip fabric on the back of the seat cover
Figure 6: Anti-slip Fabric Backing

7. Troubleshooting (FAQs)

Q: Uneven heating?
A: Check whether the seat cover is placed flat on the car seat. Ensure no objects are compressing the heating wires unevenly.
Q: Failure to start or no heat?
A: Verify that the power connection is secure at both the seat cover and the 12V outlet. Ensure the vehicle's 12V outlet is functioning. Check the fuse in the cigarette lighter plug.
Q: Where can I get replacement cables?
A: For replacement parts, please contact customer support or the seller directly.
Q: The HI/LO switch does not seem to change temperature, or it gets too hot on LO setting.
A: Some units may have less distinct temperature differences between HI and LO, or may heat intensely. If it becomes uncomfortably hot, toggle the switch to 'OFF' periodically or use only for short durations. If the switch is completely non-functional, it may indicate a defect; contact support.

8. Specifications

Feature Detail
Product Name Universal Automotive Heated Seat Cushion
Available Colors Black, Gray, Brown
Product Size (Front Row Single Seat) Approximately 50 * 100 cm (Back height: 58cm, Seat depth: 47cm, Seat width: 48cm)
Net Weight 540g
Material Skin-friendly fabric, Anti-slip fabric, Heating silk fiber (Artificial leather)
Voltage 12V
Power 30W-45W
Power Line Length Approximately 125cm
Temperature Range 30℃ - 65℃
Applicable Season Autumn And Winter
Dimensions of the heated car seat cover
Figure 7: Seat Cover Dimensions

9. User Tips

  • Cable Management: The wiring can be bulky. Consider using cable ties or clips to organize the wires for a neater installation and to prevent them from interfering with driving controls.
  • Temperature Control: If the seat cover feels too hot even on the 'LO' setting, periodically switch it to 'OFF' to maintain a comfortable temperature.
  • Securing the Cover: While the provided straps are designed to secure the cover, some users find the elastic tight or the number of hooks insufficient. Ensure the cover is adequately secured to prevent shifting during use.
  • Initial Inspection: Upon arrival, inspect the product for any damage or missing components, especially the power cables and switches.

10. Warranty and Support

Your Amagi Heated Car Seat Cover comes with the following after-sales service:

  • 7-Day No-Reason Return or Exchange: Please refer to the seller's return policy for specific conditions and procedures.
  • One-Year Warranty: The product is covered by a one-year warranty against manufacturing defects.

For any issues, questions, or to claim warranty service, please contact the seller or customer support directly with your purchase details.

A PDF version of this user manual is available for download: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.