ludengchaoshi XG-Ceiling fan lights

Contents

User Manual

ludengchaoshi 120W LED Ceiling Light with Fan

1. Introduction

This manual provides instructions for the safe and efficient use of your ludengchaoshi 120W LED Ceiling Light with Fan. This product features 2.4G wireless digital remote control technology, ensuring simple, convenient operation with strong anti-interference capabilities. Please read this manual thoroughly before installation and operation.

360° Rotating Blower Fan Light

Image: The 360° Rotating Blower Fan Light, highlighting its 6-speed adjustable, flexible, rigid, and infinite dimming capabilities.

2. Setup and Installation

2.1 Pre-installation Prompts

  • For safe use, installation, inspection, and maintenance must be performed by professional electricians.
  • The fan light can only be installed or removed when the power is off.
  • Ensure all screws for each part of the fan light are firmly fixed during installation.
  • When the fan is rotating, prevent any objects from coming into contact with the blades to avoid danger.

2.2 Installation Steps

  1. Before installing the product, turn off the power and determine the installation plan and ceiling load.
  2. According to the hole positions on the bottom plate (bracket), drill holes in the ceiling, insert expansion bolts, and use screws to secure the bottom plate. Fix the board (bracket) to the ceiling to ensure a secure installation.
  3. Installation Diagram Figure 1

    Image: Installation Diagram Figure 1, showing how to secure the bracket to the ceiling with expansion bolts and screws.

  4. Connect the neutral wire (N) and live wire (L) of the power cord to the two wires of the lamp driver power supply. (Note: The outlet of the lamp does not distinguish between neutral and live wires). Insulate the connections with electrical tape.
  5. Wiring Diagram Figure 2

    Image: Wiring Diagram Figure 2, illustrating the connection of neutral and live wires to the lamp driver power supply.

  6. Align the grooves inside the lamp with the screws on the base plate and tighten them.
  7. Tighten the screws of the bracket and lamp to ensure they are securely installed.
  8. Tightening Screws Figure 3

    Image: Tightening Screws Figure 3, showing the final step of securing the lamp to the bracket.

  9. After installation, ensure that it is correctly installed before powering on.
  10. After starting up, use the remote control (two AAA batteries need to be purchased separately) to check if the device has lighting or fan functionality.

3. Operating Instructions

3.1 Control Methods

  • Wall Switch: Cycles through White light, Warm color light, and Neutral light.
  • Remote Control: (Battery not included in packaging)
    • Remote control distance: Infrared 3-5 millimeters, 2.4G infinite 8-20 meters.
    • The remote control requires two AAA batteries.

The remote control allows for variable and infinite dimming and color adjustment, as well as 6-speed adjustable wind speed with forward and reverse rotation functions.

Smart Stepless Dimming

Image: Smart Stepless Dimming, demonstrating the ability to switch between bright white light, natural neutral light, and warm yellow light.

Remote Control and Fan Speed Settings

Image: Remote Control and Fan Speed Settings, showing the remote control and indicating 6 levels of wind speed (LEVEL 1/2/3/4/5/6).

3.2 Product Demonstration Video

Video: A demonstration of the 'Starry Sky Bedroom Fan Light' showcasing its light color changes, fan speed adjustments, and ultra-quiet operation.

4. Maintenance

4.1 LED Maintenance Instructions

  • When replacing replaceable light source appliances, ensure to cut off the power to avoid electric shock or damage to LEDs and appliances.
  • Replace the LED light source according to its model. When connecting wires, distinguish positive and negative pole connections and check fixation.
  • Determine if any screw has missed its gasket, which could cause a short circuit.
  • The replaceable light source of the lamp should be replaced by the manufacturer, service agent, or personnel with similar qualifications.

5. Troubleshooting

5.1 If the fan light emits noise:

  • Ensure that all screws on the base plate (bracket) are tightened.
  • Check for friction during motor operation.

5.2 General Warning

WARNING: To prevent fire and electric shock, do not install or use electrical switches other than those provided with this fan light. Always disconnect power before inspection, repair, or cleaning to prevent personal injury.

6. Specifications

Feature Detail
Model NumberXG-Ceiling fan lights (XB117)
Brand Nameludengchaoshi
Item TypeCeiling Fans
Power SourceAC
Power (Light)60W*2
Motor Power15W
Luminous Flux2000-82000
Is DimmableYes (Remote dimming)
Is Bulbs IncludedYes
Control MethodREMOTE CONTROL
Switch TypeREMOTE CONTROL
Wind Speed6 levels (1/2/3/4/5/6)
Light Color OptionsWhite light, Warm light, Natural light
DimensionsDiameter: 48cm, Height: 20cm (for XB117) / 12cm (for XFC+RC)
Body MaterialABS, IRON
StyleModern Style
CertificationRoHS, CE
Installation MethodSelf-Contained
Remote Control DistanceInfrared 3-5mm, 2.4G infinite 8-20 meters
Scope of UseRoom, Study, Living Room
Product Dimensions and Specifications

Image: Detailed product dimensions and key specifications for the XB117 model.

Widened and Thickened ABS Fan Blades

Image: Close-up view of the widened and thickened ABS fan blades, designed for stable and effective air supply.

Transparent Acrylic Embellishments

Image: Detail of the transparent acrylic embellishments, enhancing aesthetics and creating a warm atmosphere.

7. Warranty and Support

This product comes with a 1-year warranty.

For further detailed instructions and diagrams, you may refer to the official user manual PDF available from the seller. Please contact the seller or authorized service personnel for any warranty claims or technical support.

The official user manual PDF can be found at: User Manual (PDF)

8. User Tips

  • The fan can operate independently, meaning it works even when the light is turned off.
  • The fan light features an ultra-quiet design, making it suitable for bedrooms and study rooms where minimal noise is desired.
  • The unique color design adds a distinct charm to your room, enhancing its aesthetic appeal.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.