JIUYIN JY-ZJ0032

Contents

JIUYIN 7-inch Motorcycle Navigation System

Model: JY-ZJ0032

Introduction

Thank you for choosing the JIUYIN 7-inch Motorcycle Navigation System. This device is designed to enhance your riding experience with advanced navigation, communication, and recording capabilities. Featuring a 2K display, IPX8 waterproof rating, wireless CarPlay, Android Auto, and integrated dash cam functionality, it provides a comprehensive solution for modern motorcyclists. Please read this manual thoroughly before use to ensure proper installation, operation, and maintenance.

Safety Information and Disclaimer

  • This unit uses a negative ground and a 12V power supply.
  • Always switch off the vehicle's power before installation and switch it on again after installation.
  • Avoid using high-pressure water guns or immersing the product in water, despite its waterproof rating, to prevent internal damage.
  • The camera is fully waterproof, but avoid contact with oil, alcohol, tar cleaner, and other solvents to prevent damage to the waterproof layer.
  • Regularly clear storage space for optimal file storage speed and safety.
  • This product is designed exclusively for motorbikes.
  • Watching video programs or operating the device in ways that distract from driving is prohibited by law in many regions. Prioritize your safety and the safety of others.
  • Navigation functions are intended as an aid only; they do not replace your judgment or attention while driving. The manufacturer is not responsible for accidents caused by distraction or misuse.

Package Contents

Please check the box for the following items:

  • JIUYIN 7-inch Motorcycle Navigation Display Unit
  • Power Cord
  • Mounting Bracket
  • GPS Remote Control (optional)
  • Front Camera (optional)
  • Rear Camera (optional)
  • Tire Pressure Monitoring System (TPMS) Sensors (optional)

Note: The specific contents may vary based on the purchased package version (e.g., with or without recorder, with or without TPMS).

JIUYIN 7-inch Motorcycle Navigation System components

Image: Components of the JIUYIN 7-inch Motorcycle Navigation System, showing the main unit, power cord, and mounting bracket. Dimensions are 181mm x 113mm.

Setup Guide

1. Pre-installation Precautions

  • All disassembly and installation processes require disconnecting the vehicle's power.
  • Do not connect the product power supply directly to the motorbike or electric car battery; this can cause short-circuits.
  • The power supply should connect to a circuit that is active when the engine starts (ACC state) and off when the engine is off. Use a multimeter to confirm a 12V supply in the ACC state and 0V when off.
  • Before connecting the power cord, use a multimeter to verify the voltage meets the 12V requirement.

2. Installation Position

There are three suitable positions for mounting the navigation unit: crossbar, handlebar, or mirror. Plan the optimal position before fixing the unit.

3. Power Installation Guidelines

  1. Locate the Fuse Box: Find your motorbike's power fuse box, typically near the front end or the battery.
  2. Prepare Multimeter: Use a multimeter to measure the voltage (12V) before installation.
  3. Identify Power Source: Measure the power supply of the fuse box. Confirm a 12V reading when the engine is started or in ACC state, and 0V when the engine is switched off.
  4. Connect Power Cord: Take out the fuse box and connect the positive pole (12V wire) of the power cord.
  5. Connect Ground Wire: Connect the GND wire to the negative terminal of the battery or a suitable ground point on the motorcycle chassis.

4. Host Wiring Diagram

The main unit connects to various components:

  • Power Cord Interface: Connects to the vehicle's 12V power supply (ACC and GND).
  • Front View Interface: For the optional front camera.
  • Rear View Interface: For the optional rear camera.
  • GPS Remote Control (optional): Connects to the unit for easy control.

5. Tire Pressure Sensor Installation (Optional)

If your unit includes TPMS sensors:

  1. Screw the anti-theft hexagonal nut onto the valve thread of the tire first.
  2. Screw the sensor clockwise onto the valve thread of the tire.
  3. Use the clamp to tighten the anti-theft hexagonal nut counter-clockwise against the sensor to lock it securely.
  4. After installation, check for air leakage using soapy water.

Tire Pressure Sensor Matching:

Screw the external tire pressure sensor onto the front tire nozzle. Deflate the tire slightly until you hear air escaping. On the device's tire pressure interface, select the front wheel matching button ('FRO'). Once data appears, click 'Binding' to confirm. Repeat for the rear wheel. Ensure no air leaks after installation.

Operating Instructions

1. Product Overview

The JIUYIN Motorcycle Navigation System functions as a car recorder, offers wireless mobile phone connectivity (CarPlay, Android Auto), provides audio output (native speakers, Bluetooth headset), allows wireless control via the ELOOK Pro mobile app, and includes GPS and optional tire pressure warning.

2. Boot Password

  • Default Password: The default power-on password is 0000. You can change this in the 'Setting Function Item'.
  • Forgotten Password: If you forget your password, enter 1333 to reset it to 0000.
  • Disable Password: In the 'Settings' page, go to 'System Password' and select 'Off' to disable the password prompt at startup.

3. Mobile Phone Connection

Wireless CarPlay Connection:

  1. Select 'CarPlay' from the device's mobile phone connection menu.
  2. Enable Bluetooth and Wi-Fi on both your mobile phone and the navigation unit.
  3. Find the Bluetooth button on the device's main interface to view its Bluetooth information.
  4. Connect your phone to the device's Bluetooth name (e.g., TF801_xxx).
  5. After Bluetooth connection, wait for your phone to start CarPlay, and the screen will interconnect.
  6. The device will automatically reconnect after reboot.

Wireless Android Auto Connection:

  1. Select 'Android Auto' from the device's mobile phone connection menu.
  2. Enable Bluetooth and Wi-Fi on both your mobile phone and the navigation unit.
  3. Find the Bluetooth button on the device's main interface to view its Bluetooth information.
  4. Connect your phone to the device's Bluetooth name (e.g., TF801_xxx).
  5. After Bluetooth connection, wait for your phone to start Android Auto, and the screen will interconnect.
  6. If using an Android phone from outside your region, you may need to update related components (Android Auto, Google Maps, Google Music, Google Services).

Wireless ELOOK PRO APP:

  1. Select 'ELOOK PRO APP' function in the device's car setup menu.
  2. Connect your mobile phone to the device's Wi-Fi hotspot (e.g., TF801-XXX), default password: 12345678.
  3. Scan the QR code displayed on the device to download the app, then click to connect.
  4. The app supports real-time preview, control of the device, and saving videos/pictures to your mobile phone.

4. Key Features

  • GPS Navigation: Utilize your phone's navigation apps (e.g., Google Maps, Apple Maps) directly on the device screen for clear, turn-by-turn directions.
  • Hand-free Call: Make and receive calls directly from the device interface via Bluetooth, ensuring safer communication while riding.
  • Voice Control: Supports Siri and Google Voice Control for hands-free operation of navigation, music, and calls.
  • Dual 2K HD Camera (Optional): Record front and rear views simultaneously in 2K resolution, providing crucial evidence in case of incidents.
  • Phone App Playback: Review recorded footage directly on your smartphone via the ELOOK PRO app.

Video: Product demonstration showing wireless CarPlay/Android Auto connection, GPS navigation, hand-free calls, voice control, dual 2K camera recording, IP67 waterproof rating, and phone app playback.

Maintenance

  • Cleaning: Use a soft, damp cloth to clean the screen and device body. Avoid using alcohol, tar cleaner, or other harsh solvents that can damage the waterproof layer or screen coating.
  • Memory Card: Use a genuine 32-128GB, CLASS10 high-speed Micro TF memory card. Format the memory card in the recorder when using it for the first time.
  • Regular Formatting: After extended use, memory cards can accumulate fragmented files, potentially causing data corruption. Format and clean the memory card regularly to maintain optimal performance and prevent audio/video file damage or loss.
  • Storage Space: Regularly clear the storage space on the memory card to ensure speed and safety of file storage.
  • Waterproofing: After installing the memory card, ensure the rubber plug is pressed firmly and the memory card cover is locked to prevent water ingress and maintain the recorder's waterproof integrity.

Troubleshooting

  • Device does not power on: Check if the wiring connection to the vehicle's ACC power is correct.
  • Front or rear camera does not display: Check the camera connection. If the camera itself is faulty, replace it.
  • Video recording is not clear: Check for dust on the lens and wipe it clean.
  • Bluetooth cannot connect: Verify that the Bluetooth password is correct when pairing with the host and your mobile phone.
  • Bluetooth headset cannot connect: Check the host and headset compatibility. If the host cannot find the headset, it may be incompatible; try connecting a different headset.
  • Cannot play back recorded video/photo in APP: Check if the TF-SD card is damaged.
  • Screen display or video recording shows streak electromagnetic wave interference: Check camera alignment and cable ties. Ensure smooth alignment, no folds, and sufficient slack. Cable ties should not be too tight, and the car shell should not be extruding the cable.

Specifications

FeatureSpecification
Brand NameJIUYIN
OriginMainland China
Screen Size7 inch
Resolution1280*720P (IPS Touch Screen)
Waterproof LevelIPX8
MaterialABS+METAL
Operation SystemLinux OS
CPU2 CORE RISC
CarPlaySupport Wireless CarPlay
Android AutoSupport Wireless Android Auto
BluetoothSupport
Wi-FiYes
Max External Memory128G (TF Card 32-128G C10 Memory Card recommended)
2K HD Front/Gear camBoth Support Recording (2K+2K Video Resolution)
Screen Brightness500 nits
Operation Temperature-20℃ to 80℃
Storage humidity range30% to 90%RH
Anti-Theft FunctionPower-on Password
Voltage requirementsInput 8-24V/Output 5V/2.5A

User Tips

  • Screen Visibility: The screen is designed to be perfectly visible even in strong sunlight, enhancing your riding experience.
  • Glove-Friendly Touch: The display is responsive even when wearing gloves, ensuring ease of use during rides.
  • SD Card Recommendation: Always use a genuine 32-128GB, CLASS10 high-speed Micro TF memory card for reliable recording and storage.
  • Regular SD Card Maintenance: To prevent data corruption and ensure smooth operation, format your SD card regularly, especially after long periods of use.
  • Secure Mounting: Ensure the device is securely mounted and stable to withstand vibrations and bumps during your rides.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.