HOTO H-D50

Contents

HOTO Smart Laser Measure Pro User Manual

Model: H-D50 | Brand: HOTO

1. Product Overview

Please read this manual carefully before using the product and keep it for future reference. Thank you for using HOTO Smart Laser Measure Pro.

HOTO Smart Laser Measure Pro with app interface

HOTO Smart Laser Measure Pro with its companion mobile application interface.

Components

Labeled diagram of the HOTO Smart Laser Measure Pro components

Diagram illustrating the key components of the HOTO Smart Laser Measure Pro.

  1. Laser receiver lens
  2. Laser emission lens
  3. Display
  4. Mode switching button
  5. Power/Measure button
  6. Metal lanyard hole
  7. Type-C charging port

2. Display Information

The device's display provides real-time measurement data and status indicators.

Labeled diagram of the HOTO Smart Laser Measure Pro display

Detailed view of the HOTO Smart Laser Measure Pro's LED display with various indicators.

  1. Measuring basis/Laser emission alert
  2. Battery indicator
  3. Bluetooth connection
  4. Measuring angles in real time
  5. Measurement history - Group 1
  6. Measurement history - Group 2
  7. Measurement history - Group 3
  8. Real-time measurement data
  9. Measurement unit

3. Setup

3.1. Turning On/Off

  • Power-on: In the power-off state, press the Power/Measure button for more than 1 second to start the tool. The display will light up and enter test mode.
  • Power-off: In the power-on state, press the Power/Measure button for more than 3 seconds to turn off the tool.
  • If the product is inactive for 180 seconds, it will automatically turn off.

3.2. Charging

  • This rangefinder is equipped with a universal Type-C charging port and comes with a USB charging cable.
  • If it has not been used for a long time, fully charge the product before use.
  • The tool does not measure during the charging process.

3.3. Connecting to the HOTO App

The HOTO Smart Laser Measure Pro can connect to the HOTO App via Bluetooth for enhanced functionality.

HOTO Smart Laser Measure Pro connected to the HOTO App via Bluetooth

The HOTO Smart Laser Measure Pro displaying Bluetooth connectivity and app integration.

  • Bluetooth Activation: Bluetooth is on by default and cannot be turned off manually. The screen will show a Bluetooth icon. It will automatically turn on when the product is started, displaying a flashing icon.
  • App Connection: Open the HOTO app on your mobile device and click the upper right corner to add a device. Follow the in-app steps to pair. The Bluetooth icon will be permanently lit when the connection is successful.
  • Connection Failure: If the connection fails within 180 seconds, Bluetooth will automatically turn off to save energy.
  • App Download: Scan the product's QR code or search for "HOTO app" in your app store. Download and install the HOTO app. If already installed, you will be directed to the device connection page.
  • Note: HOTO Smart Laser Measure Pro has a non-independent and complete Bluetooth module with CMIIT ID: 2020DP2859.

3.4. Bluetooth Reset

When the laser measure is on/off, press and hold the Power/Measure button for 7 seconds. The screen will display "RESET" and a checkmark icon to reset the product's Bluetooth network configuration information.

4. Operation

4.1. Vibration Feedback

  • The instrument vibrates once when it is manually powered on/off.
  • The instrument vibrates once when the switch is flipped to change modes.
  • The instrument vibrates once when the measurement is finished.

4.2. Mode Switching

  • Flip the switch down to change modes in the following order: Distance Measurement > Angle Measurement > Angles and Height Measurement > Size Measurement > Virtual Scale.
  • Flip the switch upwards to change modes in reverse order.

4.3. Measuring Distance

  • After starting the product, short press the Power/Measure button. The tool will emit a laser and measure the distance. The current distance will be displayed in real time.
  • Press the Power/Measure button again to stop laser emission. The fixed numbers show measurement values.

4.4. Measuring Angles

  • Flip the switch up or down to launch the Angle Measuring mode. The angle is displayed in real time.
  • Press the Power/Measure button again to stop laser emission. Numbers will stop to show measurement values.

4.5. Measuring Angles and Height

  • Flip the switch up and down to initiate the Angle and Height Measurement mode.
  • Short press the Measure button once to emit laser. The measurement will be conducted in real time and seen on the display.
  • Press the Measure button again to stop laser emission. The number will stop and show the measurement data of a triangle's hypotenuse and inclination. After measuring the hypotenuse and inclination, the instrument will automatically calculate the height and horizontal distance.
  • To continue the measurement, short press the Measure button again.

4.6. Measuring Size (Area)

  • Flip the switch up or down to enter the Size Measurement mode.
  • Short press the Measure button once to emit laser. The measurement will be conducted in real time and seen on the display. Press the Measure button again to stop laser emission. The measurement shows the rectangle's length.
  • Use the same method to measure the rectangle's width, and the instrument will automatically calculate the rectangle's size (area).
  • To continue the measurement, short press the Measure button again.

4.7. Virtual Scale

  • Flip the switch up or down to launch the Virtual Scale mode.
  • Short press the Measure button once to emit laser. The measurement will be conducted in real time. The default unit is cm.
  • Press the Power/Measure button again to stop laser emission, and the number will stop and show the measurement data.
  • The minimum adjustable length is 0.2 m and the maximum length is 50 m.
Virtual scale mode display on the HOTO Smart Laser Measure Pro

The display showing the virtual scale mode.

4.8. Changing Measurement Units

The product supports three measurement units: "m" (meters) by default, "ft" (feet), and "0' 00" 1/16" (foot, inch, 1/16).

  • Length units: 0.000m, 0.000ft, 0' 00" 1/16
  • Size units: 0.000m^2, 0.000ft^2, 0.000ft^2
  • To use ft (foot) or 0' 00" 1/16 (foot, inch, 1/16), switch the measurement units in Product Settings found in the HOTO app.

4.9. Switching Reference Plane

By default, the reference plane of the product is the end reference. Use the product end as the reference plane. To use the front reference, switch the reference plane in Product Settings - Rangefinder Settings in the HOTO app.

5. Maintenance

  • Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to extreme temperatures or humidity.
  • Do not attempt to disassemble or repair the device yourself, as this may void the warranty and cause damage.
  • Store the device in a safe place, out of reach of children and unauthorized persons.

6. Troubleshooting

If you encounter any issues, refer to the table below for common problems and solutions.

ErrorCauseSolution
Quick flashing of the lightning bolt signThe battery level is low.Charge the laser measure.
Unable to chargeCharging temperature protectionIt is recommended to charge at a normal temperature of about 25°C.
Couldn't measure and the display shows "-.--".The laser reflective signal is too weak (e.g., when measuring black surfaces).Measure a target with high reflectivity or use the laser measure with a reflective board.
The laser reflective signal is too strong (e.g., when measuring highly reflective surfaces).Measure a target with low reflectivity or use the laser measure with a reflective board.
Out of the operating temperature rangeUse the laser measure within the specified temperature range.
Out of measurement rangeUse the laser measure within the measurement range.

7. Specifications

Comparison table of HOTO Laser Measure vs. HOTO Laser Measure Pro

Comparison of HOTO Laser Measure and HOTO Laser Measure Pro features.

General Specifications
Model:H-D50
Measurement Range:0.05-50 m
Measurement Accuracy:± (2 mm + D*1/10000)
Analog Ruler Scale Accuracy:± (4 mm + D*1/10000)
Minimum Displaying Unit:0.001 m
Measurement Unit:m/ft
Laser Type:630-680 nm wavelength
Lithium-ion Battery:3.7 V ⎓ 850 mAh
Display Screen:1.77-inch LCD screen
Bluetooth Transmission Distance:Approx. 8 m
Charging Input:5 V ⎓ 1 A
Operating Power:1 W (MAX.)
Charging Time:Approx. 100 min
Automatic Turn-off Time:180 s
Automatic Laser Off Time:180 s
Operating Temperature:-10°C to 50°C
Storage Temperature:-20°C to 60°C
Storage Humidity:20%-80% RH
Item Dimensions:99.5 × 44.1 × 23.3 mm
Net Weight:Approx. 90 g

Note on Accuracy: In analog ruler mode, the test accuracy is ±4mm. "D" refers to the actual distance in an indoor environment with standard reflective surfaces. All data produced by this product may vary slightly due to different actual measurement environments and should depend on users' actual measurements. The rangefinder is appropriate for indoor measurements. Measurement results may show wider discrepancies in harsh environments such as extremely strong sunlight, excessively fluctuating temperature, weak reflective surfaces, and low battery power. The measuring range of 0.05m is the minimum measurable distance using head-based reference mode.

8. Warnings

Read the safety and operating instructions carefully before using the laser measure for the first time.

  • Failure to use the laser measure in accordance with the instructions indicated in this user manual will lead to damage to the laser measure, decreased measurement accuracy, or injuries to users or other people.
  • Do not use any methods to disassemble or repair the laser measure on your own. Never illegally modify or change the laser emitting performance of the laser measure. Properly store the laser measure and keep it out of reach of children and unrelated people.
  • Do not point the laser light at your eyes and other body parts or those of other people. Never aim the laser light at the surfaces of highly reflective objects.
  • Do not use the laser measure near aircraft or medical equipment, or use it in a flammable or explosive environment, because the electromagnetic radiation of this laser measure may interfere with other devices.
  • Do not dispose of used batteries and unusable laser measures with household waste. Dispose of them per national or local laws and regulations.

Laser Radiation Warning

Laser radiation warning label: Class 2 Laser Product, Max output <1mW, 630-680nm

Laser radiation warning label indicating Class 2 Laser Product specifications.

LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Maximum output of laser radiation <1 mW
wavelength 630-680 nm
IEC 60825-1:2014; EN 60825-1:2014

9. User Tips

  • The device easily connects to your phone and instantly updates measurements, making it very convenient.
  • Utilize the app to retitle each measurement for future reference, helping to avoid mistakes.
  • The feature to add measurements to photos is very handy for documentation.
  • The intuitive app allows for creating simple floor plans, which is great for home projects.
  • The vibration feedback during measurement provides a satisfying user experience.
  • This tool is highly recommended for indoor use and DIY projects due to its quality, functionality, and app features.

10. Frequently Asked Questions (FAQ)

Q: Does it work with the Mi Home app?
A: The product connects to the HOTO app. Please refer to section 3.3 for app connection details.
Q: Does it work with the floor plan feature?
A: Yes, the HOTO app allows you to draw blueprints and annotate data, which can be used for floor plans.
Q: Is the product original?
A: HOTO is a certified brand and committed to genuine items. This manual is for the HOTO Smart Laser Measure Pro.
Q: How do I find the program (app) for the phone?
A: You can scan the QR code provided in section 3.3 or search for "HOTO app" in your mobile device's app store.

11. Warranty and Support

11.1. Manufacturer Information

Manufacturer: Shanghai HOTO Technology Co., Ltd.
Address: Building 45, No. 50 Moganshan Road, Putuo District, Shanghai, PRC, 200060.

11.2. Compliance Declarations

EU Declaration of Conformity

We, Shanghai HOTO Technology Co., Ltd., hereby declare that the product HOTO Smart Laser Measure Pro / H-D50 complies with the essential health and safety requirements of the following directives: 2014/53/EU The Machinery Directive. References to harmonized standards include EN 62479:2010, EN 61010-1:2010, ETSI EN 301 489-1 V2.2.3:2019, ETSI EN 301 489-17 V3.2.2:2019, EN 61326-1:2013, EN 61000-3-2:2019, EN 61000-3-3:2013+A1:2019, ETSI EN 300 328 V2.2.2:2018, and 20011/65/EU+ (EU) 2015/863 Restrictions of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.

Federal Communications Commission Supplier's Declaration of Conformity

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

11.3. Additional Resources

For a detailed user manual in PDF format, please refer to the official document: User manual (PDF)

Official product video demonstrating the HOTO Smart Laser Measure Pro's features and app integration.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.