1. Introduction
The RAGEER PCIe X16 Extension Cable is designed to provide flexible mounting options for your graphics card while maintaining high-speed data transfer. It supports both PCIe 3.0 and PCIe 4.0 standards, offering compatibility with a wide range of NVIDIA and AMD GPUs. This manual provides instructions for proper installation, operation, and troubleshooting to ensure optimal performance and longevity of your product.
2. Safety Information
Please read and follow these safety guidelines to prevent damage to the product or your computer components:
- Ensure your computer is powered off and unplugged from the wall outlet before installation.
- Discharge any static electricity from your body by touching a grounded metal object (e.g., your computer case) before handling components.
- Handle the riser cable and graphics card by their edges to avoid touching sensitive electronic components.
- Do not bend the cable excessively or force connectors into place.
- Ensure all connections are secure before powering on your system.
3. Setup and Installation
Follow these steps to install your RAGEER PCIe X16 Extension Cable:
- Prepare Your System: Power off your computer and unplug it from the power source. Open your computer case to access the motherboard and PCIe slots.
- Identify PCIe Slot: Locate an available PCIe x16 slot on your motherboard.
- Install Riser Cable: Carefully insert one end of the riser cable into the PCIe x16 slot on your motherboard. Ensure it is fully seated and secured.
- Mount Graphics Card: Attach your graphics card to the other end of the riser cable. The 90° up input port design (Figure 2) facilitates vertical GPU mounting, reducing stress on the PCIe slot.
- Secure Components: Secure the graphics card within your case using appropriate mounting hardware. Ensure the riser cable is routed without sharp bends or kinks.
- Reconnect Power: Reconnect all necessary power cables to your graphics card and motherboard.
- Close Case: Close your computer case and reconnect the power supply.
4. Operating Instructions
Once installed, the RAGEER PCIe X16 Extension Cable operates transparently, allowing your graphics card to function as if directly connected to the motherboard. It ensures stable transmission and low signal loss for a smooth gaming and computing experience.
5. Maintenance
The RAGEER PCIe X16 Extension Cable is designed for durability and requires minimal maintenance. To ensure its longevity and optimal performance:
- Keep Clean: Periodically inspect the connectors for dust or debris. Use compressed air to gently clean if necessary.
- Avoid Extreme Bends: While the cable is flexible, avoid bending it sharply or repeatedly, as this can damage internal wiring.
- Secure Connections: Ensure the cable remains securely connected to both the motherboard and the graphics card. Loose connections can lead to performance issues.
- Environmental Conditions: Operate your computer in a well-ventilated area to prevent excessive heat buildup, which can affect all internal components, including the riser cable.
6. Troubleshooting
If you encounter issues after installing the riser cable, consider the following troubleshooting steps:
6.1. No Display or Boot Failure
- Check Connections: Ensure the riser cable is fully seated in both the motherboard's PCIe slot and the graphics card.
- Power Supply: Verify that your graphics card is receiving adequate power from the power supply unit (PSU).
- PCIe Version Compatibility: A common issue is using a lower-version PCIe riser cable with a higher-version GPU/Motherboard, which can cause boot failure.
6.2. BIOS Setup for PCIe Version
If you are using a PCIe 4.0 cable with a PCIe 5.0 GPU, or if your motherboard (e.g., HUANANZHI, Maxsun, JGINYUE) requires it due to interference, you may need to manually lower the PCIe version in your BIOS/UEFI settings. The exact steps may vary by motherboard manufacturer (e.g., ASUS, Gigabyte, MSI, ASRock), but generally involve:
- Enter the BIOS/UEFI Setup Utility during boot (usually by pressing DEL or F2).
- Switch to Advanced Mode.
- Navigate to PCIe/Chipset Settings.
- Locate the Specific PCIe Speed Option (may be named "PCI Subsystem Settings", "Chipset Configuration", "North Bridge Configuration", or similar).
- Change the setting from Auto or PCIe 4.0/5.0 to PCIe 3.0.
- Save Changes and Exit.
Refer to your motherboard's manual for precise instructions.
7. Specifications
| Feature | PCIe X16 3.0 Version | PCIe X16 4.0 Version |
|---|---|---|
| Brand | RAGEER | |
| PCIe Version | PCIe 3.0 | PCIe 4.0 |
| Bandwidth | 16GB/s | 32GB/s |
| Transmission Rate | 8GT/s | 16GT/s |
| Connector Angle | 90° Up Input Port | |
| Material | TPE cable body + PCB, 3U Gold-Plated Connectors, Shielded Soft Cables | |
| Available Lengths | 10cm, 20cm, 30cm, 40cm, 60cm (custom lengths may be available) | |
| Dimensions (approx. for 10-100cm length) | Width: 139mm (5.47in), Height: 21.5mm (0.85in) / 16mm (0.63in) | |
| Compatibility | Compatible with 99% of NVIDIA (RTX 4090, RTX 4080, RTX 4070 Super/Ti, RTX 4060 Ti/4060, RTX 30 Series, RTX 20 Series, GTX 16 Series) and AMD (RX 7900 XTX, RX 7900 XT, RX 7900 XRE, RX 7800 XT, RX 7700 XT, RX 7600, RX 7000 Series, RX 6000 Series, RX 5000 Series) home graphics cards. Backward compatible with PCIe 2.0/1.0. | |
8. User Tips
- BIOS Settings: Always check your motherboard's BIOS settings for PCIe slot configuration, especially if you experience instability or boot issues. Setting the PCIe slot to a specific generation (e.g., Gen3 or Gen4) manually can sometimes resolve compatibility problems.
- Cable Management: Utilize the cable's flexibility for clean cable management, but avoid sharp 90-degree bends right at the connectors to prevent strain.
- Testing: After installation, run a benchmark like 3DMark Time Spy (Figure 9) to verify that your GPU is operating at the expected bandwidth and performance levels.
9. Warranty and Support
For detailed warranty information, please refer to the seller's policy or contact RAGEER customer support directly. If you require further assistance or have questions not covered in this manual, please consult the official product page or contact the seller.
An additional user manual in PDF format is available for download: User manual (PDF).