ZODOLAMP MDQ01

Contents

ZODOLAMP Pendant Light User Manual

Model: MDQ01

1. Introduction

Thank you for purchasing the ZODOLAMP Retro Industrial Pendant Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

2. Important Safety Instructions

DANGER: The edges of the product are sharp. Be careful not to scratch your hands during handling and installation.

ATTENTION:

  • Do not scratch your hands.
  • Ensure all screws and other accessories are tightened securely before use.
  • This product is designed for indoor use only. Do not install in outdoor or damp environments.
  • Always disconnect power at the main circuit breaker before installation, maintenance, or changing the bulb.
  • If you are unsure about electrical wiring, consult a qualified electrician.

3. Package Contents

Please check that all parts are present and undamaged:

  • Pendant Lampshade
  • Lamp Holder with Knob Switch
  • Adjustable Fabric Cord (approx. 150cm)
  • Ceiling Plate (Canopy)
  • Mounting Hardware (screws, anchors)

Note: E27 light bulb is not included.

4. Specifications

Brand NameZODOLAMP
ModelMDQ01
Item TypePendant Lights
MaterialAluminum (Metal)
Lampshade Color OptionsWhite, Black, Green, Gray, Blue, Yellow, Pink
Installation TypeCord Pendant, Self-contained
Base TypeE27
Light SourceLED bulbs (not included)
Voltage90 - 260 V (AC)
Is DimmableNo
Switch TypeKnob switch (on lamp holder)
Lighting Area5-10 square meters
Lampshade Diameter26.5 cm
Lampshade Height20 cm
Cord LengthApprox. 150 cm (adjustable)
Ceiling Plate Diameter10 cm
Ceiling Plate Height2 cm
Product Weight0.59 kg
Package Dimensions32 cm (L) x 29 cm (W) x 12 cm (H)
Pendant Light Dimensions

Figure 1: Pendant Light Dimensions (Lampshade Diameter 26.5cm, Height 20cm)

Ceiling Plate and Cord Dimensions

Figure 2: Ceiling Plate (10cm diameter, 2cm height) and Cord Length (150cm)

5. Setup and Installation

This pendant light is designed for easy installation. No complex wiring is required if attaching to an existing ceiling light socket. Always ensure power is off before beginning installation.

  1. Turn Off Power: Locate the circuit breaker for the room where you will install the light and turn off the power. Verify power is off using a voltage tester.
  2. Prepare Mounting Surface: If replacing an existing fixture, carefully remove it. Ensure the junction box is securely mounted to the ceiling.
  3. Install Ceiling Plate: Attach the ceiling plate (canopy) to the junction box using the provided mounting screws. Ensure it is flush and secure.
  4. Adjust Cord Length: If desired, adjust the length of the fabric cord by feeding it through the ceiling plate and securing it at the desired height.
  5. Connect Wiring: Connect the fixture's wires to your household wiring (usually black to black, white to white, and ground to ground). Use wire nuts to secure connections.
  6. Attach Lampshade and Bulb: Screw an E27 bulb (not included) into the lamp holder. Carefully attach the lampshade to the lamp holder assembly.
  7. Secure Fixture: Mount the lamp holder and lampshade assembly to the ceiling plate, ensuring all connections are tight and secure.
  8. Restore Power: Turn the power back on at the circuit breaker.
Lamp Holder with Knob Switch

Figure 3: Close-up of the lamp holder with integrated knob switch.

6. Operating Instructions

Your ZODOLAMP Pendant Light features a convenient knob switch integrated into the lamp holder for easy operation.

  • To Turn On: Gently twist the knob switch on the lamp holder clockwise once.
  • To Turn Off: Gently twist the knob switch on the lamp holder clockwise again.

7. Maintenance

To ensure the longevity and appearance of your pendant light, follow these simple maintenance guidelines:

  • Cleaning: Always turn off the power before cleaning. Use a soft, dry cloth to wipe down the lampshade and metal components. Do not use abrasive cleaners, solvents, or polishes, as these may damage the finish.
  • Bulb Replacement: Ensure the power is off and the bulb has cooled before attempting to replace it. Unscrew the old E27 bulb and screw in a new one.
  • Regular Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.

8. Troubleshooting

If your pendant light is not functioning correctly, please check the following:

  • Light Does Not Turn On:
    • Ensure the power supply to the fixture is on at the circuit breaker.
    • Check if the light bulb is securely screwed in and not faulty. Try a new bulb.
    • Verify that the knob switch is fully turned to the 'on' position.
  • Flickering Light:
    • Ensure the bulb is fully tightened.
    • Check for loose wiring connections (power off first).

If problems persist, consult a qualified electrician.

9. User Tips

  • Product Inspection: Upon receiving your pendant light, carefully inspect all components for any damage or defects before installation.
  • Bulb Selection: For optimal performance and energy efficiency, use E27 LED bulbs. While the maximum wattage is not specified, ensure the bulb's wattage is appropriate for the fixture and does not generate excessive heat.
  • Indoor Use Only: This pendant light is designed exclusively for indoor environments. Avoid installation in outdoor areas, bathrooms, or any location exposed to moisture.

10. Warranty and Support

For any questions, technical support, or warranty inquiries, please contact your retailer or the manufacturer with your purchase details. Please refer to your purchase documentation for specific warranty terms and conditions.

© 2023 ZODOLAMP. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.