SKYGOD UL10064

Contents

UL10064 FEP Wire Instruction Manual

Model: UL10064 | Brand: SKYGOD

1. Introduction

This manual provides essential information for the safe and effective use of the SKYGOD UL10064 FEP Wire. This product is an ultra-fine micro litz wire, featuring tinned copper conductors and FEP (Fluoroplastic) insulation, designed for high conductivity and various electronic applications.

UL10064 Micro Fine Wire spools in red, white, and blue, with brand logo.
Figure 1: UL10064 Micro Fine Wire spools in various colors.

2. Safety & Warnings

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Use within rated voltage and temperature limits.
  • Do not expose to water or moisture during operation.
  • Keep away from flammable materials during use and storage.
  • Do not disassemble, repair or modify the product by yourself.

3. Product Information

The UL10064 FEP Wire is designed for high-performance electrical applications requiring fine gauge and high temperature resistance.

  • Product Name: 10064 FEP Wire
  • Model: 38/36/34/32/30/28/26/24AWG (Available in various gauges)
  • Material: Tinned Copper
  • Rated Voltage: 30V
  • Insulation Material: FEP (Fluoroplastic)
  • Conductor Type: Stranded
  • Conductor Material: Copper
  • Structure: Without modular telephone connectors
  • Application: Overhead, various electronic devices, precision electronic instruments, audio products, etc.
  • High-concerned chemical: None
  • Certification: NONE
  • Origin: Mainland China
  • Customization: Yes
Diagram showing 7 tinned copper cores with FEP insulation.
Figure 2: Internal structure of the UL10064 FEP Wire, showing 7 tinned copper cores and FEP insulation.
Close-up of multiple fine wires being threaded through a needle, demonstrating flexibility.
Figure 3: The ultra-fine diameter and flexibility of the wire.

4. Setup

  1. Before First Use: Check the wire specification (AWG) and appearance for any damage. Ensure the wire gauge and length are suitable for your intended application.
  2. Installation: Use the wire according to its rated voltage, temperature, and specific application scenarios. Ensure proper connections and insulation for safety and optimal performance.
Note indicating that wire lengths below 500 meters do not come with a spool, showing various colored wires.
Figure 4: Packaging note: Wire lengths below 500 meters are supplied without a spool.

5. Operating

When operating with the UL10064 FEP Wire, ensure that the application does not overload the wire or exceed its electrical ratings. Always adhere to the rated voltage (30V) and temperature limits (up to 200°C) to prevent damage and ensure safety.

6. Maintenance

  • After Use: Store the wire in a dry, cool, well-ventilated place. Keep it away from children.
  • Cleaning: Keep the wire clean and dry. Do not use corrosive cleaning agents, as these can damage the FEP insulation or the tinned copper conductors.

7. Troubleshooting

If you encounter issues with the UL10064 FEP Wire, consider the following:

  • No Conductivity: Check for visible damage to the wire or insulation. Ensure connections are secure and properly made. Verify that the wire gauge is appropriate for the current load.
  • Overheating: Ensure the wire is not overloaded beyond its electrical ratings. Confirm that the ambient temperature and application temperature do not exceed the wire's maximum operating temperature (200°C).
  • Insulation Damage: Avoid sharp bends or excessive pulling that could compromise the FEP insulation. Do not expose the wire to chemicals or environments known to degrade fluoroplastics.

8. Specifications

Detailed specifications for the UL10064 FEP Wire are provided below:

Specification OD±0.02mm Conductor No. Rated Voltage
40AWG 0.22mm 7/0.03TS 30V
36AWG 0.28mm 7/0.05TS 30V
34AWG 0.32mm 7/0.06TS 30V
32AWG 0.38mm 7/0.08TS 30V
30AWG 0.53mm 7/0.10TS 30V
28AWG 0.6mm 7/0.12TS 30V
26AWG 0.7mm 7/0.16TS 30V
Table of specifications for UL10064 FEP Wire, including AWG, Outer Diameter (OD), Conductor Number, and Rated Voltage.
Figure 5: UL10064 FEP Wire Specification Table.
Image showing spools of UL10064 FEP wire available in 10 different colors.
Figure 6: Available colors for UL10064 FEP Wire.

9. User Tips

  • The twisted wire design is particularly well-suited for intricate projects such as model railway lighting, offering flexibility and ease of installation in confined spaces.
  • For projects requiring precise wiring, the ultra-fine gauge of this wire allows for detailed work and minimal visual impact.

10. Warranty & Support

For warranty information and technical support, please contact the seller directly. The product complies with EU electrical safety, electromagnetic compatibility (EMC), and environmental protection regulations, and is CE marked in accordance with applicable EU directives (LVD, EMC, RoHS).

A detailed user manual in PDF format is available for download: User manual (PDF)

11. Compliance Information

This electronic product complies with EU electrical safety, electromagnetic compatibility (EMC) and environmental protection regulations. This product is marked with CE in accordance with applicable EU directives (LVD, EMC, RoHS).

NOTE: This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.

12. Manufacturer & EU Representative Information

Manufacturer:

Shenzhen Tianshen Technology Co., Ltd
19-A-J25, Building A, Guanghao International Center, Intersection of Meilong Road and Zhongmei Road, Daling Community, Minzhi Street, Longhua District, Shenzhen City, Guangdong Province 518000, China
Tel: +86-13076627676
Email: shenzhenskygod@163.com

EU Authorized Representative:

ECLAT SOLUTION SARL
Bureau 1145, 37 Passage du Ponceau, 75002 Paris
Contact Person: Elena Wang
Tel: +33 187652619
Email: eclatsolution@outlook.com

13. Disposal

Do not dispose of this product as unsorted municipal waste. Please follow local regulations for waste electrical and electronic equipment recycling.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.