AULA F87 Mechanical Keyboard User Manual

1. Introduction

Thank you for choosing the AULA F87 Mechanical Keyboard. This keyboard features a compact 87-key layout, GASKET structure, hot-swappable switches, and versatile tri-mode connectivity (Wired, 2.4G Wireless, Bluetooth). It is designed for an optimized typing and gaming experience with customizable RGB lighting and macro programming capabilities. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting.

Figure 1: AULA F87 Mechanical Keyboard. Features include Gasket structure, PCB single key slot, 3ms delay, 5 layers fill, and a 4000mAh battery.

2. Package Contents

Please check the package for the following items:

• AULA F87 Mechanical Keyboard
• USB Type-C Cable
• 2.4G USB Receiver (often stored in the keyboard's slot)
• Keycap Puller
• Switch Puller
• Extra Switches (if included)
• User Manual

Figure 2: Package contents including the keyboard, cable, tools, and documentation.

3. Setup and Connection

3.1. Wired Mode Connection

1. Locate the mode switch on the keyboard (usually on the side or back).
2. Set the mode switch to the 'OFF' position.
3. Connect one end of the provided USB Type-C cable to the keyboard's Type-C port.
4. Connect the other end of the USB Type-C cable to an available USB port on your computer.
5. The keyboard will be automatically recognized and ready for use.

3.2. 2.4G Wireless Mode Connection

1. Locate the mode switch on the keyboard.
2. Set the mode switch to the '2.4G' position.
3. Remove the 2.4G USB receiver from its storage slot on the keyboard (if applicable).
4. Plug the 2.4G USB receiver into an available USB port on your computer.
5. The keyboard should connect automatically.

3.3. Bluetooth Mode Connection

1. Locate the mode switch on the keyboard.
2. Set the mode switch to the 'BT' (Bluetooth) position.
3. To enter pairing mode, press and hold the key combination Fn + 1 (or Fn + 2, Fn + 3) for approximately 3 seconds. The corresponding '1' (or '2', '3') key will start flashing a cyan light, indicating it's ready to pair.
4. On your computer or device, open Bluetooth settings and search for new devices.
5. Select 'AULA-F87' (or 'AULA-F87 5.0' for newer systems) from the list of available devices.
6. Once connected, the flashing light on the keyboard will turn solid for 2 seconds, then return to its normal lighting effect.
7. You can pair up to three Bluetooth devices using Fn + 1, Fn + 2, and Fn + 3. Short press these combinations to switch between paired devices.

3.4. Charging Instructions

1. Connect the USB Type-C cable to the keyboard and a USB power source (e.g., computer USB port, USB wall adapter).
2. A red indicator light will illuminate to show that the keyboard is charging.
3. The indicator light will turn green when the keyboard battery is fully charged.

4. Operating Instructions

4.1. Keyboard Layout and Features

Figure 3: AULA F87 Keyboard Layout.

Figure 4: Product details showing double section foot brace, input chamfer design, side RGB light, and RGB backlight.

4.2. Key Combinations (Fn Functions)

The Fn key is used in combination with other keys to access various functions:

• Backlight Effect Switching:Fn + Ins: Cycle through 16 different backlight effects.Fn + Del: Cycle through 10 music rhythm RGB effects (requires driver for full functionality).
• Backlight Adjustment:Fn + Home: Adjust backlight color.Fn + End: Adjust backlight speed.Fn + PgUp: Increase backlight brightness.Fn + PgDn: Decrease backlight brightness.
• RGB Light Strip Adjustment (Side Lighting):Fn + Z: Switch RGB light strip mode.Fn + X: Adjust RGB light strip color.Fn + C: Adjust RGB light strip speed.Fn + V: Adjust RGB light strip brightness.Fn + B: Adjust RGB light strip direction.
• System Mode Switching:Fn + W: Switch to Windows system mode.Fn + Q: Switch to Android system mode.Fn + E: Switch to MAC system mode.Fn + R: Switch to iOS system mode. (Note: In MAC/iOS mode, WIN and ALT keys may swap positions, and F1-F12 become multimedia functions).
• WIN Key Lock:Fn + Win: Lock or unlock the Windows key. When locked, the WIN key indicator light will be constantly on, and the WIN key will be disabled.
• Indicator Light Description:Press and hold Fn to temporarily display the current connection mode (2.4G, Bluetooth, Wired), current Bluetooth channel (1/2/3), and current system mode (Android, Win, Mac, iOS) on the corresponding keys. Release Fn to restore normal lighting.

4.3. Driver Macro Programming

The AULA F87 supports driver-based macro programming and advanced RGB lighting customization. Please download the official driver software from the AULA website for full functionality.

Figure 5: Driver software interface for macro programming and RGB light effect customization.

4.4. Hot-swappable Switches

The AULA F87 features a full key hot-swappable design, allowing you to easily replace switches without soldering. It supports both 3-pin and 5-pin mechanical switches.

Figure 6: Hot-swappable switch replacement using a switch puller.

4.5. Intelligent Standby Mode

In Bluetooth and 2.4G wireless modes, the keyboard will automatically enter a power-saving standby mode (backlights turn off) after one minute of inactivity. To wake up the keyboard, simply press any key.

4.6. Product Showcase Video

5. Maintenance

5.1. Cleaning

• Disconnect the keyboard from your computer before cleaning.
• Use a soft, lint-free cloth lightly dampened with water or a mild cleaning solution to wipe the keycaps and keyboard body.
• For dust and debris between keycaps, use compressed air.
• Avoid spraying liquids directly onto the keyboard.

5.2. Switch and Keycap Replacement

• Use the provided keycap puller to carefully remove keycaps.
• Use the provided switch puller to gently grip and pull out switches.
• When inserting new switches, ensure the pins are aligned with the sockets to avoid bending.
• Press new keycaps firmly onto the switch stems.

6. Troubleshooting

• Keyboard not responding (Wired): Ensure the USB Type-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
• Keyboard not responding (2.4G Wireless): Ensure the 2.4G USB receiver is properly plugged into the computer and the keyboard mode switch is set to '2.4G'. Try re-pairing by unplugging and replugging the receiver.
• Keyboard not responding (Bluetooth): Ensure the keyboard is in Bluetooth mode and paired correctly. Check your device's Bluetooth settings. Try re-pairing the keyboard. Ensure the keyboard battery is charged.
• Keys not working or double-typing: This could indicate a faulty switch. Utilize the hot-swappable feature to replace the problematic switch.
• RGB lights not working: Check backlight brightness settings (Fn + PgUp). Ensure the keyboard is not in power-saving mode. If using the driver, check lighting settings there.
• Intermittent connection: Ensure the keyboard is within range of the receiver/Bluetooth device. Avoid sources of strong electromagnetic interference.
• Keyboard not charging: Ensure the USB Type-C cable is fully inserted and the power source is functional.

7. Specifications

For more detailed technical diagrams and information, please refer to the official user manual PDF: AULA F87 User Manual PDF.

8. User Tips

• Experiment with Switches: Since the keyboard is hot-swappable, consider trying different types of mechanical switches to find the feel that best suits your typing or gaming style.
• Customize RGB: Utilize the driver software to create personalized RGB lighting effects and macros for an enhanced user experience.
• Battery Management: To maximize battery life in wireless modes, consider turning off the RGB backlighting when not needed, or adjust brightness to a lower setting.

9. Warranty and Support

Your AULA F87 Mechanical Keyboard comes with a standard manufacturer's warranty. For warranty claims, technical support, or further assistance, please contact the retailer or visit the official AULA support website. Please retain your proof of purchase for warranty services.