Nekteck NK-FM06

Contents

Nekteck Shiatsu Foot Massager Machine

Model No.: NK-FM06

Nekteck Shiatsu Foot Massager Machine

The Nekteck Shiatsu Foot Massager Machine provides deep kneading, heat, air compression, roller, and vibration massage for muscle relaxation.

Important Safety Instructions

Please read ALL instructions carefully before using the Foot Massager for the first time. Keep this manual for future reference. Improper use or unauthorized repairs are not permitted and will lead to loss of warranty. Failure to comply with this manual may cause fire, electric shock, and other serious injuries.

  • This product is not intended to diagnose or treat any medical condition. Consult your physician before use. STOP using and consult your healthcare provider immediately if you feel uncomfortable.
  • Consult your doctor if you are pregnant, have heart disease, hypertension, osteoporosis, or other illnesses.
  • If you use electrical aids (e.g., pacemakers), consult your doctor before taking a massage.
  • DO NOT use this product directly on injured, swollen, or inflamed areas or skin eruptions.
  • The device has a heating function and hot surfaces. Be careful if you are sensitive to heat.
  • This product should NOT be used by people with reduced physical, sensory, or mental capabilities unless supervised or instructed.
  • This product is NOT A TOY. Ensure adequate supervision when used by or near children.
  • DO NOT leave the product unattended when plugged in.
  • For Household Use ONLY.
  • DO NOT use the product outdoors or near water sources (sinks, baths, showers).
  • DO NOT operate if water or other liquids get into the massager.
  • DO NOT place near hot areas (hot gas, electric burner, heated oven).
  • DO NOT sit or stand on the massager; it is not designed to support full body weight.
  • DO NOT put foreign objects into openings.
  • DO NOT use pointed or sharp objects.
  • Stop immediately if you feel abnormal pain, high temperature, or smell burning.

Electric Safety:

  • Ensure supply voltage matches the rating plate.
  • DO NOT use blankets or pillows on the massager during operation to prevent overheating.
  • Use only the provided power adapter.
  • Unplug IMMEDIATELY if malfunctioning or damaged. Inspect by a qualified person.
  • Unplug after use and before cleaning.
  • DO NOT use if dropped or any part is damaged.
  • DO NOT operate with wet hands or feet.

Package Contents

  • Nekteck Shiatsu Foot Massager Machine with Soothing Heat (x1)
  • User Manual (x1)
  • Power Adapter (x1)
  • Warranty Card (x1)

Product Features

  • Soothing Heat Function
  • 2 Intensity Levels
  • 3 Massage Modes
  • 15-Min Auto Off

Specifications

ParameterDetail
Product NameNekteck Shiatsu Foot Massager Machine with Soothing Heat
Model NumberNK-FM06
Rated VoltageDC 12V = 2.5A
Rated Power30W
Dimensions14.4 x 13.2 x 7.1 in / 36.5 x 33.5 x 18.0 cm
Net WeightApprox. 7lbs / 3.2kg
Product Dimensions and Size Compatibility

The massager fits up to US Men's Size 11.

Know Your Shiatsu Foot Massager

The Nekteck Shiatsu Foot Massager Machine combines kneading massage, air pressure, and heat therapy to relieve foot soreness and pain. It features 3 massage modes and 2 intensity levels, providing a comprehensive massage for soles, heels, and toes.

Massager Components:

  • DC Power Jack
  • Detachable Foot Cover
  • Foot Slot
  • Control Panel
Comprehensive Massage Zones Diagram

The massager targets the heel, forefoot, instep, and arch with rolling, kneading, and air compression.

Control Panel

Control Panel Layout
  • ON/OFF Button: For turning the massager on/off.
  • Heat Button: For turning the heating function on/off.
  • Air Pressure Intensity Button: For switching between low/high air pressure intensity.
  • Massage Mode Button (M1/M2/M3): For switching between massage modes.

Setup Instructions

  1. Remove all packing material from the massager. Check for any damaged or missing parts.
  2. Unwind and plug the power cord into the DC power jack on the massager.
  3. Place the massager on a flat floor in front of your chair.
  4. Connect the power adapter to the socket.

Your Shiatsu Foot Massager is now ready for use!

Video: Unboxing and demonstration of the Nekteck Shiatsu Foot Massager Machine.

Operating Instructions

Massage Operation:

  1. Press the ON/OFF Button to turn on the massager. The unit will start a 15-minute massage session by default.
  2. Default Settings:
    • Heating Function: ON
    • Operation Mode: M1 (Rolling & Kneading & Air Pressure Massage)
    • Air Pressure Intensity: Low Intensity
  3. Switch the massage mode by pressing the Massage Mode Button. The mode cycles through M1 → M2 → M3. The corresponding indicator light will turn green.
  4. Turn off or restart the heating function by pressing the Heat Button. The red indicator light will turn off/on.
  5. Switch the intensity level (low/high) by pressing the Air Pressure Intensity Button. The indicator light below "L" or "H" will light up green.

Notes:

  • The heating function turns on automatically after switching the massage mode.
  • The massager turns off automatically after a 15-minute session to prevent overheating.
  • Switching massage mode or heating function will not affect the timing.
  • In M2 Mode, air pressure is deactivated and locked.

Cautions:

  • DO NOT use the massager or heating function for over 15 minutes at a time, or over 30 minutes a day.
  • Allow the massager to cool for 5 minutes between uses to prevent overheating and extend lifespan.
  • To end massage, press the ON/OFF Button.
  • DO NOT stand on the foot massager. Use ONLY when sitting.
  • If deep kneading is uncomfortable, wear thick socks for moderate pressure.

Cleaning and Maintenance

To Clean the Massager:

  • Unplug and allow to cool.
  • Clean surface with a soft, slightly damp sponge or cloth.
  • DO NOT allow water or liquids into the massager.
  • DO NOT immerse in liquid.
  • DO NOT use abrasive cleaners, brushes, or strong chemicals.

To Clean the Foot Cover:

Detachable and Washable Foot Cover
  • The foot cover is removable for cleaning.
  • Hand wash with water temperature below 30°C.
  • Do not bleach.
  • Do not tumble dry.
  • Do not iron.
  • Do not dry clean.

To Store:

  • Place in its package box or store in a safe, dry, cool place.
  • Avoid sharp edges and pointed objects.
  • DO NOT wrap the power cord around the product.
  • Keep away from high temperatures.

Troubleshooting

ProblemPossible CausesSolutions
Product does not workON/OFF button not pressed
Adapter not plugged in
DC connector not properly connected
Press ON/OFF button
Plug adapter properly
Check and reconnect connector/jack
Product suddenly stops workingAutomatic 15-min shut-off
Overused, overheat protection activated
Press ON/OFF to restart
Unplug, let cool completely
Product stops heatingHeat button not pressedPress Heat button, indicator light should be red
Massage intensity too high/lowFoot positioned at wrong angleAdjust contact angle
Product abnormally warmProduct likely overusedUnplug, let cool completely

If the massager still does not operate correctly, it may be defective. Please contact a qualified technician. DO NOT try to repair it yourself.

Warranty and Customer Support

Limited Warranty:

Nekteck provides a 12-month warranty from the date of purchase. For questions or concerns, please contact customer service.

Disclaimer:

Nekteck and its subsidiaries assume no liability for damage caused by product use other than for its intended use or as instructed in the user manual. Improper use involves serious risks including injury and disability. By using Nekteck products, you agree that Nekteck accepts no responsibility for any injury.

Customer Support:

For any questions or concerns regarding your new product, please contact our friendly Customer Support Team. Your satisfaction is our priority.

Email: support@nekteck.com

We will reply to your message within 24 hours! Please include your Order ID in your email for faster solutions.

A PDF version of this user manual is also available for download from the seller's product page.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.