1. Important Safety Instructions
WARNING: When power is on, the soldering iron tip temperature is between 100°C-450°C (212°F-842°F). Improper use can lead to burns or fire. Please strictly observe the following:
- Do not touch the metal parts near the soldering iron tip.
- Do not use the soldering iron near flammable materials.
- Inform others in the workspace that the soldering iron tip can cause burns and potential hazards.
- Turn off the power when resting or after completing work.
- When replacing parts or setting up the soldering iron, turn off the power and wait for the tip to cool down to room temperature.
- This product uses a three-wire grounding plug and must be inserted into a three-hole grounded socket. Do not modify the plug or use an ungrounded adapter. If an extension cord is needed, use a grounded three-wire power cord.
- Do not use the soldering iron for any work other than welding.
- Do not strike the soldering iron tip on the workbench to clean it, as this can severely damage the tips.
- When replacing parts, use original factory parts.
- Do not tamper with the soldering iron without proper safety precautions.
- Do not wet the soldering iron or use it with wet hands.
- Smoke will be produced during welding; ensure adequate ventilation.
- Do not perform actions that could harm your body or damage objects when using the soldering iron.
- Children are unaware of the dangers of electrical products. Do not use or store this station in a place accessible to children. Do not allow children to get near or touch this station.
2. Product Overview
The AIFEN A9E is a high-performance soldering station designed for precision welding and rework tasks. It features rapid heating and temperature recovery, compatibility with various handles, and intelligent temperature control.

Figure 2.1: AIFEN A9E Soldering Station highlighting fast heat-up and temperature return.
Key Features:
- 160W Max Power: Provides ample power for various soldering tasks.
- Fast Heating & Temperature Recovery: Heats up in 2 seconds, returns to temperature in 1 second.
- Universal Handle Compatibility: Supports 115, 210, and 245 series handles and tips.
- Three Memory Storage Keys: For quick recall of frequently used temperature settings.
- Temperature Range: 100°C - 450°C (212°F - 842°F).

Figure 2.2: Key functions of the AIFEN A9E Soldering Station.
Component Identification:

Figure 2.3: Diagram of the AIFEN A9E Soldering Station components.
- HUB: Connection point for accessories.
- Temperature Unit Display: Shows °C or °F.
- Setting Key (SET): For menu navigation and confirmation.
- Soldering Iron Tip Pull-out Box: Storage for tips.
- Actual Temperature Display: Shows current tip temperature.
- Power Progress Bar: Indicates power output.
- Save Button (CH1, CH2, CH3): For saving and recalling temperature presets.
- Temperature Adjustment Buttons (▲▼): To increase or decrease temperature.
- Aluminum Bracket: Holds the soldering iron handle.
- Copper Wire Cleaning Ball: For cleaning soldering iron tips.
- Cleaning Sponge: For wet cleaning of soldering iron tips.
- Handle: The soldering iron handle.
3. Setup Instructions
Before connecting or disconnecting the handle, always turn off the power to prevent damage to the control circuit board.
- Connect the Handle: Insert the soldering iron handle's connector into the corresponding socket on the main unit.
- Install Heating Core: Insert the desired heating core (tip) into the handle.
- Position the Station: Place the soldering station on a stable, heat-resistant surface. Rest the handle on its designated holder.
- Connect Power: Plug the power cord into the station and then into a grounded electrical outlet.
- Power On: Flip the power switch. The display window will show