Introduction
This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your H96MAX M1 TV Box. Please read this manual carefully before using the device to ensure optimal performance and longevity.

Figure 1: H96MAX M1 TV Box Overview
Setup Guide
1. Basic Connections
- Connect the H96MAX M1 TV Box to your television using an HDMI cable.
- Connect the power adapter to the TV Box and then to a power outlet. The power LED will turn blue upon successful connection.
- Connect a mouse, air mouse, or other USB input devices to the available USB ports on the TV Box.
- Ensure all cables are securely connected. If the power LED is off, check the connections.
2. Network Configuration
2.1. Wi-Fi Connection
- From the Home Screen, navigate to SETTINGS > Network.
- Select Wi-Fi to enable the Wi-Fi function.
- Choose your desired Wi-Fi hotspot from the list, enter the password, and connect.
2.2. Ethernet Connection
- From the Home Screen, navigate to SETTINGS > Network.
- Select Ethernet to enable the Ethernet function.
- Insert a network cable into the Ethernet port on the TV Box. The network will connect automatically.
2.3. WLAN Hotspot (Portable Wi-Fi Hotspot)
The TV Box can function as a wireless access point (AP) if connected to a wired network.
- From the Home Screen, navigate to SETTINGS > Other > More Setting > Portable hotspot.
- Select Portable Wi-Fi hotspot.
- Configure the Network SSID, Security type, and Password as desired.
3. External Storage
The H96MAX M1 TV Box supports external storage devices such as USB flash drives and TF cards.
3.1. USB Disk
- Insert a USB flash drive or removable hard disk into a USB port on the TV Box while it is powered on.
- An icon will appear in the top-left corner of the desktop.
- Open the FileBrowser application; the identified USB(A:) drive will appear under "Local Disk" for access.
3.2. TF Card
- Insert a TF card into the designated slot on the TV Box while it is powered on.
- An icon will appear in the top-left corner of the desktop.
- Open the FileBrowser application; the identified External Storage Card will appear under "Local Disk" for access.
Operating Instructions
1. Power On/Off and Sleep
- To turn on the device, ensure it is connected to power. The power LED will be blue.
- To enter sleep mode, press the power button on the remote control.
- To wake from sleep mode, press the power button on the remote control again.
2. Application Management
2.1. Opening Applications
Use the arrow keys on the remote control to navigate to the desired program icon and press the OK button to open it.
2.2. Switching Between Applications
Click on "My Apps" to view recently used programs. Click on a program icon to switch to that application.
2.3. Closing Applications (Mouse Mode Only)
In mouse mode, click the application icon to view recently used programs. Click and hold the desired application, then drag it to a blank area on the screen to close it.
3. Returning to Home Screen
Click the Home icon on the screen or on the remote control to return to the main home screen.

Figure 2: Android 13.0 User Interface
Maintenance and Updates
1. OTA Online Upgrade
The H96MAX M1 TV Box supports Over-The-Air (OTA) online firmware upgrades to ensure you have the latest features and bug fixes.
- Connect the TV Box to the internet via Ethernet or Wi-Fi.
- Find and open the "System update" application.
- Click "CHECK NOW" to search for available updates.
- If a new version is released, follow the on-screen prompts to update.
- Important: Do not power off the device during the upgrade process. The box will restart automatically after a successful upgrade and return to the main screen.

Figure 3: OTA Online Upgrade Process
2. Reflashing the Box (Firmware Update via SD Card)
In cases where an OTA update is not possible or for advanced troubleshooting, you can reflash the firmware using an SD card.
- Uncompress the downloaded firmware (ROM) file to the root directory of a formatted SD card.
- Ensure the TV Box is powered off (power cable unplugged) and no external USB storage devices are attached.
- Insert the prepared SD card into the SD card slot on the TV Box.
- Using a non-metallic pointed object (like a toothpick), insert it into the AV port of the box to press and hold the hidden button.
- While holding the hidden button, plug the power cable back into the TV Box. Do not release the button until you see the "Robert Logo" screen.
- The update process will run automatically. Once completed, choose "Reboot". You may disregard any errors displayed during this process as they are often not relevant to the device's operation.
- After the system reboots, go to Settings > Wi-Fi to ensure Wi-Fi is working correctly.
Troubleshooting
- No Power: Ensure the power adapter is securely connected to both the TV Box and a working power outlet. Check if the power LED is blue.
- No Signal on TV: Verify that the HDMI cable is correctly connected to both the TV Box and your TV. Ensure your TV input source is set to the correct HDMI port.
- Network Connectivity Issues: If experiencing problems with Wi-Fi, try connecting via Ethernet. Ensure your Wi-Fi password is correct and the signal is strong. For Ethernet, check the cable connection.
- Applications Not Responding: Try closing and reopening the application. If the issue persists, restart the TV Box.
- System Slowdown: Close unnecessary background applications. Clear cache for frequently used apps in Settings > Apps.
- Remote Control Not Working: Check the batteries in your remote control. Ensure there are no obstructions between the remote and the TV Box.
Specifications
| Feature | Description |
|---|---|
| Category | Set Top Box |
| Operating System | Android 13.0 |
| CPU | Rockchip RK3528 Quad Core ARM Cortex-A53 |
| GPU | Mali-450 |
| Memory (RAM) | 2GB DDR3 / 4GB DDR4 |
| Internal Storage (ROM) | 16GB eMMC / 32GB eMMC / 64GB eMMC |
| Max. Extended Capacity | TF Card Up To 64GB |
| Max Output Resolution | 8K @ 60 Hz |
| Video Output | HDMI-Compatible 2.0 |
| Video Codecs | H.264/AVC, H.265/HEVC |
| HDR Standards | HDR10+, HDR10 |
| Audio Formats | DTS, Passthrough, DTS:X, DTS-HD MA |
| Wi-Fi | Wi-Fi 6 (802.11n 2.4GHz/5 GHz) |
| Ethernet | 100M |
| Bluetooth | 4.0 |
| USB Ports | 2x USB 2.0 |
| IPTV Support | Yes |
| Power Source | DC 5V, 2A |
| Inbox Adaptor | Yes |
| Remote Control | Included |
| Certification | CE |

Figure 4: Rockchip RK3528 CPU Details

Figure 5: 8K Video Decoding and HDR Support
User Tips
- Language Settings: The Android 13.0 system supports multiple languages. You can change the display language in the system settings under "Language & Input".
- Optimizing Connectivity: If you experience buffering or network issues, try connecting the TV Box directly to your router via an Ethernet cable for a more stable connection. If your router is far, consider using a Wi-Fi 6 compatible router for better wireless performance.
- Expanding Storage: For large media libraries, utilize the USB 2.0 ports or the TF card slot to connect external hard drives, USB flash drives, or TF cards. This helps keep the internal storage free for applications.
- App Management: Regularly close unused applications to free up RAM and improve overall system performance. You can also clear app caches in the settings to free up storage.
Frequently Asked Questions (FAQ)
- Q: Does the H96MAX M1 TV Box support multiple languages?
- A: Yes, as an Android 13.0 device, it supports a wide range of languages. You can change the system language in the device's settings.
- Q: Can I connect external storage devices like USB drives or TF cards?
- A: Yes, the H96MAX M1 TV Box is equipped with 2x USB 2.0 ports and a TF card slot, allowing you to connect external storage for media files and other data.
- Q: How do I update the system firmware?
- A: The device supports OTA (Over-The-Air) online upgrades. You can check for updates in the "System update" app. For advanced users, firmware can also be reflashed via an SD card.
- Q: What kind of video resolution does it support?
- A: The H96MAX M1 TV Box supports up to 8K @ 60 Hz video output, along with 4K HD and HDR10+ standards for high-quality visual experience.
Warranty and Support
For any issues not covered in this manual, please refer to the official user manual PDF for more detailed information. You can access the PDF manual here.
If you require further assistance or have questions regarding warranty, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.