Niditon TM-ACA/NI-007/JN01-S/TM-JN01

Contents

Niditon Wake-Up Light Alarm Clock User Manual

Model: TM-ACA/NI-007/JN01-S/TM-JN01

Important Safety Information

Danger

  • Water and electricity are a dangerous combination. Do not use this appliance in wet surroundings (e.g., in the bathroom or near a shower or swimming pool).
  • Keep the adapter dry.
  • Do not let water run into the appliance or spill water onto the appliance.
  • This appliance is for indoor use only.

Warning

  • If the adapter, cord, or appliance has been damaged in any way, liquid has spilled or objects have fallen into and/or onto the appliance, the appliance has been exposed to rain or moisture, does not operate normally, or has been dropped or damaged, it should not be operated.
  • Only use the appliance in combination with the adapter supplied.
  • If the adapter (cord) is damaged, always have it replaced with one of the original type in order to avoid a hazard.

Caution

  • The appliance has no on/off switch. To disconnect the appliance, remove the adapter from the wall socket. The adapter must remain easily accessible at all times.
  • If you often wake up too early or with a headache, reduce the set light intensity level and/or the set Sunrise Simulation time.
  • If you often wake up by the alarm sound, increase the set light intensity level or the set Sunrise Simulation time.

What's in the Box

The package includes the following items:

  • Wake-Up Light Unit
  • User Manual (this document)
  • CR2032 Battery (Pre-Installed)
  • Power Cord
  • 5V/2A Adapter
Niditon Wake-Up Light Alarm Clock front view
Front view of the Niditon Wake-Up Light Alarm Clock.

Product Overview

The Wake-Up Light is designed to gently prepare your body for waking up. It features a sunrise simulation, multiple alarm settings, FM radio, colored lights, and a fall-asleep mode. All personalized settings are stored in memory and will not be erased if the adapter is removed.

Wake-Up Light used as a bedside lamp with 30-level brightness
The Wake-Up Light functioning as a bedside lamp or mood light with adjustable brightness.
Icons representing features like Sunrise Simulation, Alarm, FM Radio, USB Charger, and Color Selection
Key features of the Wake-Up Light, including sunrise/sunset simulation, alarm, FM radio, LED night light, USB charging, and color options.

Display Icons

  • FM Radio: Indicates FM radio is active.
  • Sound: Indicates sound is active.
  • Alarm 1/2: Indicates which alarm is set.
  • Snooze: Indicates snooze function is active.
  • Fall-asleep: Indicates fall-asleep mode is active.
  • Set+/Set-: Used for increasing or decreasing settings.
  • Colored lights: Indicates colored light mode is active.
  • Sunrise light: Indicates sunrise simulation is active.
  • Set: Indicates setting mode.

Buttons

  • Alarm 1 / Alarm 2: Press to turn alarm on/off; Press and hold to enter alarm setting.
  • Snooze / Sunrise light: Tap to snooze; Press to turn on Sunrise light.
  • Light brightness- / Set-: Adjusts light brightness down; Decreases setting value.
  • Color light: Turns on colored lights; Adjusts lighting mode.
  • Light brightness+ / Set+: Adjusts light brightness up; Increases setting value.
  • Frequency+ / Volume+: Increases FM frequency; Increases volume.
  • FM Radio: Turns FM radio on/off; Searches for channels.
  • Frequency- / Volume-: Decreases FM frequency; Decreases volume.
  • Sleep: Turns sleep mode on/off; Adjusts sleep timer.
  • Dimmer / Time Set: Adjusts screen brightness; Press and hold to enter time setting.

Setup and First Use

Pulling out Insulation Sheet

The Wake-Up Light comes with a pre-installed CR2032 battery for memory mode. Before first use, pull out the insulating sheet from the battery compartment to activate it. The battery typically lasts 2 years; replace it when exhausted.

Diagram showing how to pull out the insulation sheet from the battery compartment
Pulling out the insulation sheet to activate the pre-installed CR2032 battery.

Power On

Use a 5V/2A adapter to connect the Wake-Up Light and power it on. Some functions may be limited if the adapter power is less than 5V/2A. Place the Wake-Up Light approximately 16-20 inches (40-50 cm) from your head, for example, on a bedside table.

Setting the Clock Time

You must set the clock time when you plug in the appliance for the first time.

  1. Press the Light brightness- / Light brightness+ button to adjust to 12-hour or 24-hour format. Press the Color light / OK button to confirm.
  2. Press the Light brightness- / Light brightness+ button to set the Hours. Press the Color light / OK button to confirm.
  3. Press the Light brightness- / Light brightness+ button to set the Minutes. Press the Color light / OK button to complete.

For subsequent time adjustments, press and hold the Dimmer / Time Set button on the right to enter the time setting process, then follow the steps above.

Operating Instructions

Searching for FM Channels

Both the Fall-asleep and FM Radio functions rely on FM channels. Search for channels first:

  1. Press the FM Radio button to turn on the FM radio.
  2. Press and hold the FM Radio button for 2 seconds to automatically search for channels (frequency from 76.0MHz to 108MHz).

User Tip: After the initial search, you can directly switch to the previous channel by simply clicking the FM Radio button.

Listening to the Radio

  1. Press the FM Radio button to turn on the FM radio.
  2. To adjust channels manually after automatic search, press and hold the Frequency+ / Volume+ or Frequency- / Volume- button.

Tip: Ensure the antenna is fully unwound and move it around for the best reception.

When FM is enabled, click Frequency+ / Volume+ or Frequency- / Volume- to adjust the radio volume (ranges from 01 to 20). Press the FM Radio button again to turn off the radio.

Using Sunrise Light as a Lamp

  1. Press the Snooze / Sunrise light button to turn on the Sunrise light.
  2. Use the Light brightness- / Light brightness+ buttons to adjust the light brightness (ranges from 01 to 20).
  3. Press the Snooze / Sunrise light button again to turn off the sunrise light.

Colored Lights

  1. Press the Color light / OK button to turn on the colored lights.
  2. To adjust the lighting mode, press the Color light / OK button repeatedly. There are 11 lighting effects:
    • Color-Mode (1-5): Red, Green, Cyan, Blue, Purple.
    • Effect-Mode (6-11): Autochromic, Clockwise, Counterclockwise, Aurora, Flame, Snowy mountain.
  3. Use the Light brightness- / Light brightness+ buttons to adjust the light brightness (ranges from 01 to 20).
  4. Press the Color light / OK button again to turn off the colored light (when adjusted to C-11 mode).

Fall-Asleep Mode

This mode helps you fall asleep with soothing sounds and gradually dimming light.

  1. Press and hold the Sleep button to enter sleep sound setting.
  2. The word "S-0x" will flash. Use Light brightness- / Light brightness+ to choose from 4 options:
    • S-01 (meditation)
    • S-02 (chirp)
    • S-03 (ocean wave)
    • FM Radio (uses the last listened channel)
  3. Press the Color light / OK button to complete.
  4. Press the Sleep button repeatedly to adjust the sleep timer duration: ALL (continuous), OFF, 15/30/60/90/120 minutes. The setting saves and starts after 2 seconds.
  5. Adjust sound volume (level 1 to 20) while sounding using Frequency+ / Volume+ or Frequency- / Volume-.

During fall-asleep mode, you can adjust sound parameters and light mode. Volume and light brightness will fade until the timer ends.

Setting Alarms (Alarm 1 & 2)

The device supports two independent alarms (Alarm 1 and Alarm 2). Alarm 2 works identically to Alarm 1.

Image showing Alarm 1 for working days and Alarm 2 for holidays
Example of setting Alarm 1 for working days and Alarm 2 for holidays.

To set an alarm:

  1. Press and hold the Alarm 1 button to enter Alarm 1 setting.
  2. Use Light brightness- / Light brightness+ to set the Alarm-hours, then press Color light / OK to confirm.
  3. Use Light brightness- / Light brightness+ to set the Alarm-minutes, then press Color light / OK to confirm.
  4. Use Light brightness- / Light brightness+ to set alarm sounds. Press Color light / OK to confirm. Available sounds:
    • OFF: No Sound
    • S01~S07: Wake-Up ringtones (Bird, Ocean wave, Beep, Piano, Stream, Valley Echo, Bell)
    • FM Radio (uses the last listened channel)
  5. Use Light brightness- / Light brightness+ to adjust Alarm Volume (01 to 20). Press Color light / OK to confirm.
  6. Use Light brightness- / Light brightness+ to set sunrise time in advance (10-60 minutes before alarm). Press Color light / OK to confirm. Options: OFF (Sunrise off), 10-60 MIN.
  7. Use Light brightness- / Light brightness+ to set maximum brightness of Sunrise (level 01 to 20). Press Color light / OK to complete.

Snoozing

When the wake-up curve has ended and the alarm sound is playing, tap the top of the device (the Snooze / Sunrise light button area) to snooze. The lamp stays on, but the sound is muted. After 9 minutes, the alarm sound will start playing again. You can snooze up to 5 times.

Turning the Alarm Off

When the alarm goes off, you can turn it off by pressing the Alarm 1 or Alarm 2 button. If you turn off the alarm, the alarm profile is deactivated for that day. The light and sound automatically turn off 30 minutes after the alarm has gone off if no action is taken.

Alarm On/Off

Press the Alarm 1 or Alarm 2 button to switch the alarm on or off. The corresponding icon appears/disappears on the display.

Dimmer / Time Set

In the time display interface, click the Dimmer / Time Set button to adjust the brightness of the screen display (100%, 25%, OFF) in turns.

Charging Your USB Device

You can use the USB port on the Wake-Up Light to charge your USB devices. The maximum output is 1000 mA.

Maintenance

Cleaning and Storage

  • Clean the appliance with a soft cloth.
  • If you are not going to use the appliance for an extended period, remove the adapter from the wall socket and store the appliance in a safe, dry location where it will not be crushed, banged, or subject to damage.
  • Do not dispose of the product with normal household waste. Hand it in at an official collection point for recycling to help preserve the environment.
  • Follow your country's rules for the separate collection of electrical and electronic products. Correct disposal helps prevent negative consequences for the environment and human health.

Specifications

CategorySpecification
Model NumberTM-ACA/NI-007/JN01-S/TM-JN01
Rated Input Voltage Adapter100-240V
Rated Input Frequency Adapter50/60Hz
Rated Output Power Adapter10W
USB Charging Port Output5V, 1000mA
Nominal Light Output (level 1 - 20)1 ~ 210 lux at 45cm
Nominal Light Color (Mode 1 - 12)1600W
Dimensions (Height x Width x Depth)17 x 17 x 8 cm
Weight Main Unit / AdapterApprox. 0.3kg / 0.04kg
Cord Length Adapter120cm
Operating Temperature0°C to 40°C
Relative Humidity15% to 90% (no condensation)
FM Operating Frequency76.0 MHz - 108.0 MHz
MaterialPlastic
Motivity TypeDigital
Screen TypeLED
Battery IncludedYes (CR2032 for memory)
Smart DeviceNo (Note: Some models may offer app control via Bluetooth)

User Tips

  • App Control: While the manual details button operation, some versions of this device support a smartphone app for easier configuration. Look for a QR code on the packaging or product for app download.
  • Brightness: The sunrise simulation is generally effective for waking, even if it doesn't appear as intensely bright as some promotional images.
  • Sound Customization: You can set the alarm sound to OFF or adjust the volume to zero if you prefer to wake up only to the light.
  • FM Radio Reception: If experiencing sound interference with the FM radio, try adjusting the antenna's position and ensuring it is fully unwound for better reception.
  • Night Display: Utilize the dimmer function to turn off the time display at night if you find it too bright.
  • Power Adapter: The device requires a 5V/2A adapter for full functionality. Ensure you have one available, as it may not always be included or may vary by package.

Frequently Asked Questions (FAQ)

Q: Can I turn off the waking/sleeping sound and use only the light?
A: Yes, for alarms, you can select 'OFF' for the sound option. For fall-asleep mode, you can set the sound volume to 0.
Q: Why does the FM radio sometimes have sound interference?
A: FM radio reception can be affected by your environment. Try fully unwinding the antenna and repositioning it to find a clearer signal.
Q: What is the difference between the various product options (e.g., 'Alarm Clock', 'Bluetooth APP', 'NZ6688J')?
A: These options typically refer to different models or versions of the product, which may include additional features like Bluetooth connectivity for app control, or specific design variations. This manual covers the core functionality common to the Wake-Up Light series.
Q: Can the device function without being continuously connected to a smartphone app?
A: Yes, the device is designed for full operation using its physical buttons, as detailed in this manual. The app (if available for your model) provides an alternative, often more convenient, method for setup and control.

Warranty and Support

For warranty information and customer support, please refer to the seller's official store or contact them via the provided email address. Keep your purchase receipt for any warranty claims.

Official store: niditon.aliexpress.com
E-mail: gztmsy@dingtalk.com

A PDF version of this manual is available for download: User manual (PDF)

Product Video

Demonstration of the Wake-Up Light's sunrise simulation and colorful light features.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.