SPEEDRACING OCC-1006

Contents

User Manual: Universal 800ml Coolant Expansion Tank

Model: OCC-1006 | Brand: SPEEDRACING

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of your Universal 800ml Coolant Expansion Tank. This product is designed to manage the expansion and contraction of engine coolant, preventing leakage and helping to maintain optimal engine operating temperatures. Please read this manual thoroughly before installation and use.

2. Safety & Warnings

Important Safety Information:

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Do not expose to water or moisture unnecessarily.
  • Handle with care to avoid cuts or injuries.
  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.

This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.

3. Package Contents

Verify that all components are present and undamaged upon opening the package. If any items are missing or damaged, please contact your retailer.

  • 1x Radiator Coolant Tank (800ml capacity)
  • 1x Cooling Hose
  • 2x Mounting Brackets
  • 2x Hose Clamps
  • 1x Cap Clamp
  • 1x Threaded Cap with O-ring Gasket (pre-installed on cap, prevents coolant leakage)
  • Necessary nuts and bolts for mounting
Main product image showing the black coolant tank, red hose, mounting brackets, hose clamps, and a cap clamp. Inset shows the tank installed in an engine bay.
Figure 1: Coolant Tank and Included Accessories
Diagram detailing the features of each accessory: cooling hose, hose clamps, threaded cap with O-ring gasket, cap clamp, and mounting brackets.
Figure 2: Accessory Features

4. Specifications

Attribute Value
Model NameOCC-1006
Brand NameSPEEDRACING
Item TypeCoolant Overflow Tank
Capacity800ml
Material6061-T6 Aluminum Alloy
Item Weight0.9 kg
Overall Length20.5 cm (8.07")
Body Diameter75mm (2.95")
Cap Diameter52mm (2.05")
Hose Barb Diameter10mm (0.95")
External Testing Certificationiso9001
Special FeaturesAnodized Polished, Fully TIG Welded
CompatibilityUniversal fits for all vehicle
Diagram showing the dimensions of the coolant tank, including height, width, cap diameter, and hose barb diameter.
Figure 3: Product Dimensions
Close-up images of the coolant tank highlighting its 6061 Aluminum Billet material, anodized polished finish, and fully TIG welded construction, along with the threaded cap and O-ring gasket.
Figure 4: Material and Construction Details

5. Operating Principle

The coolant expansion tank works in conjunction with your vehicle's radiator to manage coolant volume changes due to temperature fluctuations. When the engine heats up, the coolant expands, and excess coolant flows from the radiator into the overflow tank. As the engine cools down, the coolant contracts, creating a vacuum that draws the coolant back from the overflow tank into the radiator. This process prevents coolant loss and maintains proper system pressure.

Diagram illustrating the working principle of the coolant overflow tank, showing hot coolant expanding from the radiator to the overflow tank and cool coolant returning to the radiator.
Figure 5: Working Principle Diagram

6. Installation

Installation instruction is not included. Professional installer is highly recommended!

Due to the critical nature of the cooling system, professional installation is strongly advised to ensure correct setup and prevent potential damage or injury. Incorrect installation can lead to coolant leaks, engine overheating, or other serious issues.

General steps for installation typically involve:

  1. Choose a Mounting Location: Select a secure and accessible location in the engine bay, ensuring the tank is positioned vertically and below the radiator cap level if possible, to allow for proper gravity feed and overflow.
  2. Mount the Tank: Use the provided mounting brackets, nuts, and bolts to securely fix the tank to the chosen location. Ensure it is stable and will not shake during vehicle operation.
  3. Connect the Hoses:
    • Connect one end of the cooling hose to the barb fitting on the coolant tank. Secure with a hose clamp.
    • Connect the other end of the cooling hose to the overflow port on your vehicle's radiator or existing overflow line. Secure with a hose clamp.
  4. Ensure a Sealed Environment: After connecting, ensure the entire pipeline is as close to a sealed state as possible to prevent air pockets. The tight closed cap, fully TIG welded construction, and O-ring gasket help maintain a good closed environment.
  5. Fill with Coolant: Fill the radiator and the overflow tank to the appropriate levels as specified by your vehicle manufacturer.
  6. Check for Leaks: After installation, run the engine and carefully check for any coolant leaks around the connections.
Collage of three images showing the coolant tank installed in various engine compartments, demonstrating typical mounting locations.
Figure 6: Example Installations in Engine Bays

7. Maintenance

Regular maintenance of your coolant expansion tank is crucial for optimal performance and longevity of your vehicle's cooling system.

  • Regular Inspection: Periodically check the tank, hoses, and connections for any signs of leaks, cracks, or damage. Ensure hose clamps are tight.
  • Coolant Level Check: Regularly monitor the coolant level in the tank. It should be between the 'MIN' and 'MAX' marks when the engine is cold.
  • Cleaning: If the tank becomes dirty or discolored, it can be cleaned externally with a damp cloth. Avoid using harsh chemicals that could damage the aluminum finish.
  • Coolant Quality: Ensure the coolant in your system is clean and free of debris. Contaminated coolant can lead to blockages and reduced cooling efficiency.

8. Troubleshooting

If you encounter issues with your coolant expansion tank, consider the following common problems and solutions:

  • Coolant Leakage:
    • Check all hose connections and clamps for tightness.
    • Inspect the tank for any visible cracks or damage.
    • Ensure the cap is securely tightened and the O-ring gasket is properly seated.
  • Low Coolant Level (frequent):
    • This could indicate a leak elsewhere in the cooling system, not necessarily the tank itself. Inspect the radiator, hoses, and engine for leaks.
    • Ensure the radiator cap is functioning correctly and maintaining pressure.
  • Engine Overheating:
    • While the tank helps manage coolant, overheating usually points to a larger cooling system issue (e.g., low coolant, faulty thermostat, clogged radiator, water pump failure). Consult a professional mechanic.

Always address cooling system issues promptly to prevent engine damage.

9. User Tips

  • Some users have found that drilling a small hole in the lid can improve performance in certain applications. However, this modification is not officially recommended and may affect the sealed environment of the cooling system. Proceed with caution and at your own risk.
  • The unit is generally well-made and comes with all necessary mounting hardware, making installation straightforward for those with mechanical experience.

10. Frequently Asked Questions

Q: Does the bottle come filled with foam?
A: No, the bottle does not come pre-filled with any liquid or foam. It is an empty reservoir designed to hold your vehicle's coolant.

11. Manufacturer & Support Information

For further assistance or inquiries, please contact the manufacturer or their authorized representative:

Manufacturer:

  • Company Name: Zhejiang xuzhong automobile parts co., ltd
  • Full Address: No. 666, jingye road, economic development zone, rui'an city, wenzhou city, zhejiang province
  • Email: xz2014express@163.com
  • Telephone: 86-15888266370

EU Authorized Representative:

  • Company Name: SUCCESS COURIER SL
  • Full Address: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
  • Telephone: 34-910602659

For a comprehensive item guide and additional documents, please refer to the official user manual PDF: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.