Introduction
This manual provides instructions for the installation, operation, maintenance, and troubleshooting of your SAIMILI LED COB Light Strip with Touch Dimmer. This flexible, low-voltage LED strip is designed for various indoor lighting applications, offering uniform and soft illumination with adjustable brightness.
Product Features
- Lightweight and Easy to Use: Features a low voltage power supply, making it easy to carry and suitable for various scenes.
- Energy Saving: Offers low power consumption and low heat generation compared to traditional light bulbs.
- Long Life: Designed for a service life of up to 25,000 hours, reducing the frequency of replacement.
- Flexible and Mouldable: Made from flexible material, allowing for easy installation on irregular surfaces.
- No Light Point COB Light: Provides high brightness, uniform, and soft illumination without visible individual LED points.
- Touch Dimmer: Integrated touch switch for easy ON/OFF control and brightness adjustment.
- Cuttability: Can be trimmed at designated points to fit custom lengths, with the remaining strip functioning normally.
- Easy Installation: Equipped with strong double-sided tape for simple and secure mounting.
Safety Precautions
- Do not use this LED strip in humid environments, as this may cause leakage or short circuit.
- Avoid using the LED strip for extended periods in high-temperature environments to prevent overheating and damage to the lamp beads.
- Do not immerse this LED strip in water to prevent short circuits and electric shock.
- Ensure the power cord is firmly connected before use to prevent electric shock or fire caused by detachment.
Package Contents
Please check the package for the following items:
- SAIMILI LED COB Light Strip (selected length and color)
- Integrated USB cable with Touch Dimmer Switch
Setup Instructions
- Prepare the Surface: Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the double-sided tape.
- Measure and Cut (Optional): If a custom length is required, measure the desired length and cut the LED strip only at the designated cutting marks (usually indicated by copper pads or scissor icons). The remaining part of the strip will still function.
- Attach the Light Strip: Peel off the backing from the double-sided tape on the back of the LED strip. Carefully press the strip onto the desired surface, ensuring firm contact along its entire length. The strip is flexible and can be shaped for various designs.
- Connect Power: Plug the USB connector of the light strip into a compatible 5V USB power source (e.g., USB wall adapter, power bank, computer USB port).
Operating Instructions
The LED light strip is controlled by an integrated touch switch on the USB cable.
- Power ON/OFF: Short press the touch switch to turn the light strip ON or OFF.
- Adjust Brightness: Long press the touch switch to adjust the brightness level. The brightness will cycle through its range (0% to 100%) until you release the switch at your desired level.
Maintenance
- Cleaning: Use a dry cloth to gently wipe the surface of the strip. Avoid using cleaning agents containing chemicals or alcohol, as these may damage the strip.
- Storage: If storing the strip, keep it in a dry, cool place, away from direct sunlight and high-temperature environments.
- Duration of Use: To prolong the service life of the lamp beads, it is recommended to use the strip for no more than 10 hours per day.
Troubleshooting
- Lamp beads do not light: Check the power supply and wiring connections to ensure they are normal and firmly connected.
- Brightness adjustment failure: Verify that the touch switch is functioning correctly. Try re-adjusting the brightness.
- Broken wire when bending the strip: This can occur if the bending angle is too large. Avoid frequent or excessive bending.
- Flickering lamp beads: This may indicate poor line contact or power supply issues. Check the line connections for firmness and ensure the power supply is stable.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | saimili |
| Model Number | LED COB Light Strip Touch |
| Item Type | Strip |
| Strip type | COB |
| Voltage | 5V |
| Power Source | DC |
| Power Generation | Touch |
| Luminous Flux | 249-2000 |
| Color Temp(K) | 6000K |
| LEDs Number/M | 320 |
| Specifications (light beads / m) | 320 |
| Average Life (hrs) | 50000 |
| Waterproof | No |
| Is Smart Device | No |
| Is Batteries Included | No |
| Certification | ce, EMC, LVD, ROHS |
| Occasion | LIVING ROOM |
| Origin | Mainland China |
| High-concerned Chemical | None |
User Tips
- The touch dimmer is a convenient feature for adjusting brightness; a long press allows for precise control.
- Don't hesitate to trim the strip to your exact desired length at the marked cutting points. The remaining sections will still work.
- This light strip is highly versatile for ambient lighting. Consider using it behind TVs, around mirrors, under desks, or along bedheads for a modern and soft glow.
- If the lights are not working or flickering, always double-check your USB power source and ensure all connections are secure.
Compliance Information
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
Additional Resources
A detailed user manual in PDF format is available for download. You can view it here.