1. Setup and Installation
1.1 Safety Precautions
- To avoid electric shock, please turn off the power before installing the device.
1.2 Installation
- Screw the E14 Smart LED Candle Bulb into a compatible E14 lamp holder.
- Ensure the bulb is securely fastened.
1.3 App Download
Download the eWeLink app to your smartphone:
- App Store (for iOS devices)
- Google Play (for Android devices)
1.4 Pairing the Device
The bulb supports Bluetooth Pairing Mode for initial setup. A Zigbee hub is required for Zigbee versions.
Bluetooth Pairing Mode (First Use)
- After powering on the device for the first time, it will automatically enter Bluetooth Pairing Mode. The device will show a "breathing mode" (light slowly brightens and dims).
- If not paired within 3 minutes, the device will exit Bluetooth Pairing Mode.
Manually Entering Bluetooth Pairing Mode
If the bulb exits pairing mode or you need to re-enter it:
- Press the manual switch three times repeatedly at an interval of every 1 second (OFF-ON-OFF-ON-OFF-ON). The "breathing mode" indicates the light has entered Bluetooth pairing mode.
Adding the Device in eWeLink App
- Open the eWeLink app.
- Tap the "+" icon to add a device.
- Select "Bluetooth Pairing" and follow the prompts in the app.
Compatible Pairing Mode (Alternative)
If Bluetooth Pairing Mode fails, try "Compatible Pairing Mode":
- Press the light switch three times repeatedly at an interval of every 1 second (OFF-ON-OFF-ON-OFF-ON) when the light is ON. The quick flash indicates the device enters compatible pairing mode.
- In the eWeLink app, tap "+" and select "Compatible Pairing Mode".
- For Android: Enter your Wi-Fi password and tap "Next". Wait for pairing to complete.
- For iOS: Enter your Wi-Fi password, tap "Next", then connect to the Wi-Fi SSID starting with "ITEAD-******" (password is "12345678"). Return to the eWeLink app and tap "Next". Wait for pairing to complete.

Figure 1: Excerpt from User Manual showing app download, pairing instructions, and app interface.
2. Operation
2.1 Basic Functions
- Power On/Off: Control the bulb's power state via the eWeLink app or voice commands.
- Brightness Adjustment: Adjust the light intensity from 1% to 100%.
- Color Temperature Adjustment: Change the white light from warm white (2700K) to cool white (6500K).
- RGB Color Selection: Choose from 16 million colors to set the perfect mood.

Figure 2: Illustrates the range of tunable whites and colors for mood setting.
2.2 Smart Features
- Voice Control: Compatible with Amazon Alexa, Google Assistant, and Yandex Alice. Use commands like "Alexa, turn on all the lights" or "Hey Google, set the light to blue."
- Timer & Schedule: Set schedules for the bulb to turn on/off automatically. For example, set a "Bedtime" timer to turn off at 10:30 PM or a "Wake up" timer to turn on at 7:30 AM.
- Group Control: Control multiple bulbs simultaneously with one command or through the app. Organize lights into groups for different rooms or zones.
- LAN Control: Control devices even without an internet connection (within your local network).
- Share Control: Share control of the bulb with family members through the eWeLink app.

Figure 3: Voice control integration with popular smart home assistants.

Figure 4: Example of timer and scheduling features for daily routines.

Figure 5: Group control allows managing multiple bulbs from a single device.
2.3 Switching Network
If you need to change the Wi-Fi network the bulb is connected to:
- Press the light switch three times repeatedly at an interval of every 1 second (OFF-ON-OFF-ON-OFF-ON) when the light is ON. The "breathing mode" indicates the device enters Bluetooth pairing mode, and you can pair it again to a new network.
2.4 Usage as an Ordinary Bulb
If the bulb is not paired or loses connection, it can function as a basic light source:
- Power on the bulb; it will enter quick pairing mode (changing from bright to dim and cycling modes). After 10 seconds, if powered off, it will go neutral and keep warm light at the highest brightness.
3. Maintenance
- Cleaning: Ensure the bulb is powered off and cool before cleaning. Wipe with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Environment: Use the bulb in dry environments. Avoid exposure to water or high humidity.
- Storage: If storing the bulb for an extended period, keep it in a cool, dry place away from direct sunlight.
- No User-Serviceable Parts: Do not attempt to disassemble or repair the bulb. This will void the warranty.
4. Troubleshooting
Common Problems and Solutions
- Why did this device always fail to add?
- You may have entered a wrong Wi-Fi password.
- There might be too much distance between the device and your router, or environmental interference. Try moving closer to the router.
- The Wi-Fi network is supposed to be 2.4GHz wireless network only. 5GHz networks are not supported.
- MAC address filtering might be enabled on your router. Please turn it off.
- Ensure a stable network connection.
- How many control methods are available for this device?
- Control methods include Wi-Fi, LAN control, and 2.4G remote control.
- How to check whether this device is offline?
- There is a prompt for offline devices on the device home page in the eWeLink app when the device is offline.
- What new features can be accessed during this device is in 2.4G remote control?
- In this mode, it's available to adjust the brightness, color temperature, and color. You can even control this device via Bluetooth or IR remote control (if applicable).
Factory Reset
Deleting the device from the eWeLink app will restore it to its factory settings.
5. Specifications
| Feature | Specification |
|---|---|
| Brand Name | coolo |
| Model Number | eWelink Zigbee WiFi smart candle bulb |
| Item Type | LED bulbs |
| Led Bulb Type | Candle Bulb |
| Base Type | E14 |
| Power Source | AC |
| Voltage | AC100-240V |
| Luminous Flux | 250 - 499 Lumens (249-2000 range) |
| Color Temperature | 2700K~6500K (RGBCW) |
| Beam Angle | 270° |
| Average Life | 30000 hours |
| Is Smart Device | Yes |
| Certification | CE, FCC, ROHS |
| Warranty | 3 years |
| Area | 3-8㎡ |
| LED Chip Brand | Epistar |
| LED Chip Model | 2835 |
| Shape | IRREGULAR (Candle) |
| Length | 0.105m |
| Origin | Mainland China |
Note: Specifications are subject to change without prior notice.
6. User Tips
- Smart Home Integration: Users report excellent compatibility and easy pairing with popular smart home systems like Home Assistant (ZHA, Zigbee2MQTT), Philips Hue Bridge, and SmartThings.
- Zigbee Repeater: The Zigbee version of this bulb can act as a Zigbee repeater, extending the range of your Zigbee network.
- Brightness Considerations: The white light LEDs are generally brighter than the RGB color LEDs. These bulbs are well-suited for ambient lighting or bedside lamps rather than primary room illumination if vibrant colors are desired.
- Color Consistency: If using multiple bulbs in the same area, consider purchasing them from the same batch or supplier to ensure consistent color calibration across all units.
- Philips Hue Users: While compatible, some advanced functions might not be fully available on the Philips Hue system. Basic on/off, dimming, and color control generally work well.
- Power Efficiency: The 5W LED bulb is designed to be equivalent in brightness to a traditional 60W incandescent bulb, offering significant energy savings.
7. Warranty and Support
7.1 Product Warranty
This coolo Ewelink Smart LED Candle Bulb comes with a 3-year warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use.
The warranty does not cover:
- Damage caused by improper installation or use not in accordance with this manual.
- Damage caused by unauthorized repairs or modifications.
- Damage caused by accidents, abuse, neglect, fire, water, lightning, or other acts of nature.
- Normal wear and tear.
7.2 Customer Support
For technical support, warranty claims, or any questions regarding your product, please contact the seller or retailer from whom you purchased the device. Please have your proof of purchase ready when contacting support.