AVATTO ZigBee Smart Light Switch User Manual

1. Product Overview

The AVATTO ZigBee Smart Light Switch is a modern touch-sensitive wall switch designed to integrate seamlessly into your smart home ecosystem. It allows for remote control via the Smart Life/Tuya app, voice control through Amazon Alexa and Google Home, and traditional manual touch operation. This switch requires a ZigBee gateway (hub) for smart functionalities.

Figure 1: AVATTO ZigBee Smart Light Switch (White and Black)

Figure 2: Smart ZigBee Light Switch Ecosystem. This diagram illustrates how the smart switch connects to a WiFi router via a Tuya ZigBee Hub, enabling voice control (e.g., Google Home) and app control (via smartphone).

2. Setup and Installation

2.1 Safety Precautions

• CAUTION: Before installing the switch, ensure the power supply to the circuit is completely cut off at the main breaker.
• Installation should be performed by a qualified electrician or a person with adequate knowledge of electrical systems.
• This switch requires a neutral wire for operation.

2.2 Download the Smart Life App

1. Scan the QR code provided in the manual or search for "Smart Life" in your device's App Store (iOS) or Google Play Store (Android) to download the application.
2. Open the "Smart Life" App and register an account using your phone number or email address.

2.3 Opening the Switch Panel

To access the wiring terminals, you may need to gently pry open the front glass panel. Use a small flat-head screwdriver or a similar tool to carefully unclip the panel.

2.4 Wiring Diagram

Ensure you connect the Live (L-in) and Neutral (N-in) wires correctly, along with the load wires (L1, L2, L3, etc.) to your lights. A neutral wire is required for this switch.

Figure 3: Excerpt from User Manual showing App Download, Installation Steps, Wiring Diagrams, and App Pairing. This image contains critical setup information.

Wiring for EU Wall Switch with Neutral

• Connect the Live wire to 'L-in'.
• Connect the Neutral wire to 'N-in'.
• Connect the load wires for your lights to 'L1', 'L2', 'L3' as appropriate.
• Connect the Neutral wire from your lights to 'N-out' (if applicable, or ensure neutral is common).

Wiring for US Wall Switch with Neutral

• Connect the Live wire to 'L-in'.
• Connect the Neutral wire to 'N-in'.
• Connect the load wires for your lights to 'L1', 'L2', 'L3', 'L4' as appropriate.
• Connect the Neutral wire from your lights to 'N-out' (if applicable, or ensure neutral is common).

2.5 Adding the Switch to the Smart Life App

Ensure your phone is connected to your home Wi-Fi router (2.4GHz network) and the switch is powered on.

2.5.1 Add WiFi Switch (if applicable)

There are two methods: Easy Mode (recommended) and AP Mode.

Easy Mode

1. Long press any button on the switch for 5 seconds until the green indicator rapidly blinks.
2. Open the Smart Life App, tap the '+' icon (top right) on the home page to add a device manually.
3. Select 'Electrical' then 'Switch (Wi-Fi)'.
4. Confirm the indicator is rapidly blinking. Choose your local Wi-Fi network and enter its password, then tap 'Confirm'.
5. Wait for the configuration to complete, then tap 'Done' or 'Complete'.

AP Mode (if Easy Mode fails)

1. Long press any button on the switch for 5 seconds until the green indicator slowly blinks.
2. In the app, after selecting 'Switch (Wi-Fi)', tap 'AP Mode' in the upper right corner.
3. Confirm the indicator is slowly blinking. Choose your local Wi-Fi network and enter its password, then tap 'Confirm'.
4. Tap 'Go to Connect' and connect to the Wi-Fi hotspot named 'SmartLife-xxxx' from your phone's Wi-Fi settings.
5. Return to the Smart Life App. Wait for the configuration to complete, then tap 'Done' or 'Complete'.

2.5.2 Add ZigBee Switch

For ZigBee switches, a ZigBee gateway (hub) is required. Ensure your ZigBee gateway is already successfully configured in the Smart Life app before proceeding.

1. Make sure the green LED backlight on the switch is blinking fast. If not, long press any button for 5 seconds until it blinks rapidly.
2. In the Smart Life App, navigate to your ZigBee gateway device.
3. Tap 'Add subdevice' within the gateway's interface.
4. The ZigBee gateway will automatically search for nearby ZigBee switches. Follow the app prompts to complete the pairing.

3. Operating Instructions

3.1 Manual Control

Simply touch the capacitive buttons on the switch panel to turn your lights on or off.

3.2 App Control

Once paired with the Smart Life/Tuya app, you can control your lights remotely from anywhere with an internet connection. You can also set schedules, timers, and create smart scenes.

3.3 Voice Control (Alexa & Google Home)

The AVATTO Smart Light Switch is compatible with Amazon Alexa and Google Home for convenient voice control. Ensure your Smart Life account is linked to your Alexa or Google Home app.

Figure 4: Voice Control Example. An Amazon Echo and Google Home Mini are shown, demonstrating voice commands like "Alexa, turn on living room light."

Example Voice Commands:

• For Alexa:
  • "Alexa, turn on [Device Name]"
  • "Alexa, turn off [Device Name]"
• For Google Home:
  • "Hey Google, turn on [Device Name]"
  • "Hey Google, turn off [Device Name]"
  • "Hey Google, is [Device Name] on?"

To find connection details for Alexa or Google Assistant, tap the 'edit' icon on the upper right of the switch page in the Smart Life app, then select 'Alexa' or 'Google Assistant'.

3.4 Backlight Control

The switch features a backlight that can be turned on or off to avoid disturbing sleep. This setting is typically found within the device settings in the Smart Life app.

Figure 5: Backlight Control. The image shows a smartphone screen with a 'Backlight Switch' toggle in the settings, allowing users to turn the backlight on or off.

4. Maintenance

• Clean the switch panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Keep the switch away from water and excessive humidity.
• Ensure the switch is not exposed to direct sunlight or extreme temperatures.

5. Troubleshooting

• Switch not responding: Check if the main power supply is on. Ensure the wiring is correct and secure.
• Cannot pair with app: Ensure your phone is connected to a 2.4GHz Wi-Fi network. Try both Easy Mode and AP Mode for pairing. Make sure your ZigBee gateway is online and properly configured if using the ZigBee version.
• Voice control not working: Verify that your Smart Life account is correctly linked to your Amazon Alexa or Google Home app. Check the device name in the Smart Life app and use that exact name in your voice commands.
• Neutral wire requirement: This smart switch requires a neutral wire for proper operation. If your existing wiring does not have a neutral wire, this switch will not function.

6. Specifications

7. User Tips

• Neutral Wire is Essential: Always confirm the presence of a neutral wire in your wall box before purchasing or attempting installation. This switch will not operate without it.
• Stable Network: Ensure your Wi-Fi network (for the ZigBee hub) and ZigBee network are stable for reliable performance of your smart switch.
• Device Naming: Use simple and distinct names for your smart switches in the app (e.g., "Living Room Light," "Bedroom Lamp") to make voice commands easier and more accurate.
• PDF Manual: A detailed user manual in PDF format is available for download. Refer to it for additional diagrams and instructions.

8. Warranty & Support

For warranty information, technical support, or further assistance, please refer to the product packaging or contact your retailer/manufacturer directly. Keep your proof of purchase for warranty claims.