Introduction
Thank you for choosing the WEST BIKING 5 Language Bicycle Wireless Computer. This device is designed to enhance your cycling experience by providing accurate real-time data, including speed, distance, time, and temperature. Its waterproof design and multi-language support make it a versatile tool for various cycling conditions and users. Please read this manual carefully before use to ensure proper installation and operation.
Key Features
- 5 Language Support: Switch freely between Chinese, English, German, French, and Spanish.
- IPX6 Waterproof: Designed to withstand rain and splashes, suitable for various weather conditions (not for immersion).
- 2.0 Inch HD Display: Large, clear display for easy reading during the day and green backlight for night riding.
- Wireless Design: Easy installation without complex wiring.
- Automatic Standby & Wake: The computer automatically enters sleep mode when stationary for 3 minutes and wakes up when movement is detected.
- Multi-Group Interface: Comprehensive riding data with one-click switching between displayed pages (e.g., current speed, average speed, total distance, temperature, stopwatch, clock).
- Long Battery Life: Powered by a 2032 button battery, offering approximately 90 days of active use and half a year of standby time.
Setup Instructions
1. Wireless Accessories Overview
2. Wired Accessories Overview (if applicable)
3. Installation Steps (Wireless Model)
- Prepare the Computer: Take out the electronic insulating sheet from the battery compartment.
- Mount the Bracket: Attach the bracket to your handlebar or stem. The snap-on design allows for quick installation.
- Install the Sensor: Place the gasket on the sensor. Secure the sensor to the front fork using cable ties.
- Install the Magnet: Attach the magnet to a spoke on your front wheel. Ensure the magnet aligns with the sensor when the wheel rotates.
- Install the Speedometer: Snap the bike computer onto the mounted bracket.
4. Tire Circumference Setting
For accurate speed and distance readings, it is crucial to set the correct tire circumference. Refer to the table below for common tire sizes. If possible, measure your tire's circumference directly for the most accurate results.
| Tire Size | L(mm) | Tire Size | L(mm) | Tire Size | L(mm) |
|---|---|---|---|---|---|
| 18 Inch | 1436 | 24 Inch | 1916 | 26 x 1.75 | 2045 |
| 20 Inch | 1596 | 24 x 1 3/8 Inch | 1942 | 26 x 1.95 | 2099 |
| 22 Inch | 1759 | 26 x 1.40 | 1995 | 26 x 2.1 | 2133 |
| 24 x 1.75 | 1888 | 26 x 1.50 | 2030 | 700C Tubular | 2117 |
| 700C x 20C | 2092 | 700C x 32C | 2155 | 28 Inch (700B) | 2234 |
| 700C x 23C | 2112 | 700C x 35C | 2164 | 28.6 Inch | 2281 |
| 700C x 25C | 2124 | 700C x 38C | 2174 | ||
| 700C x 28C | 2136 | 27.5 Inch | 2193 |
Note: The circumference table is a reference value. Different brands, tread patterns, wear, and weight can affect the actual tire circumference. For maximum accuracy, measure your tire circumference directly by rolling the wheel one full rotation from the valve stem and measuring the distance.
Operating Instructions
1. Power On/Off & Auto Functions
- The device automatically powers on when it detects movement.
- It enters an automatic standby (sleep) mode after 3 minutes of no activity to conserve battery.
- To wake the device from standby, simply start riding or press any button.
2. Display Functions and Switching
The bike computer offers a multi-group interface, allowing you to switch between various data displays with a single click. The display provides comprehensive riding data at a glance.
The display shows:
- Current Speed (KM/H)
- Stopwatch (STP WATCH)
- Clock
- Total Distance (TOT-DIST)
- Average Speed (AVG-S)
- Maximum Speed (MAX-S)
- Temperature (TEMP)
- Bike 1 / Bike 2 indicator (if configured for multiple bikes)
Maintenance
1. Battery Replacement
The bike computer uses a 2032 button battery. When the display dims or functions become erratic, it's time to replace the battery.
- Locate the battery compartment on the back of the unit.
- Use a coin to twist open the battery cover.
- Remove the old battery and insert a new 2032 button battery with the positive (+) side facing up.
- Close the battery cover securely.
2. Waterproofing
The device has an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. It is suitable for use in rainy conditions. However, it should not be immersed in water for prolonged periods.
3. Cleaning
Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
Troubleshooting
- No Display/Dim Display: Check battery level and replace if necessary. Ensure the insulating sheet has been removed.
- Inaccurate Readings: Verify the tire circumference setting is correct. Ensure the sensor and magnet are properly aligned and within the recommended distance. The magnetic induction should be strong for accurate data.
- No Speed Reading: Check if the sensor and magnet are correctly installed and aligned. Ensure the battery in the computer is functional.
- Device Not Waking Up: If the device doesn't wake automatically, try pressing a button. If it still doesn't respond, check the battery.
Specifications
| Product Parameters | |
|---|---|
| Brand Name | WEST BIKING |
| Model Number | YP0702089 |
| Type | Wireless |
| Stopwatch and Accessories | Wireless Stopwatch |
| Display Size | 2.0 inch (31mm x 41mm) |
| Waterproof Level | IPX6 |
| Automatic Sleep | Yes |
| Auto-Pause | No |
| External Devices | No |
| Touch Screen | No |
| Navigation | No |
| Battery | 2032 Button Battery |
| Weight | About 30g (Screen Only) |
| Applicable | Road bikes, mountain bikes, etc. |
| Functions | Speed/Stopwatch/Total Mileage/Temperature/Average Speed/Maximum Speed/Time, etc. |
| Backlight | Green Backlight |
| Languages | Chinese, English, German, French, Spanish |
User Tips
- This device functions as a speedometer and odometer, calculating speed and distance based on wheel rotations and tire circumference. It does not use GPS for tracking.
- For optimal battery life, ensure the device is in standby mode when not in use.
- Regularly check the alignment of the sensor and magnet to maintain accurate readings.
Frequently Asked Questions (FAQ)
- Q: Does this bike computer use GPS?
- A: No, this device functions as a traditional speedometer/odometer, calculating speed and distance based on the rotation of your bicycle wheel and the set tire circumference, detected by the sensor and magnet. It does not utilize GPS technology.
- Q: Is the device fully waterproof?
- A: It has an IPX6 waterproof rating, meaning it is resistant to strong water splashes and rain. However, it should not be submerged in water for extended periods.
- Q: How long does the battery last?
- A: The 2032 button battery provides approximately 90 days of active use and up to half a year in standby mode, depending on usage.
Warranty and Support
For detailed warranty information or technical support, please refer to the official user manual PDF available online or contact WEST BIKING customer service.
You can view the official user manual (PDF) for more detailed instructions and support: View User Manual (PDF)