coolo XLD-A19

Contents

Smart WiFi Zigbee LED Light Bulb User Manual

Brand: coolo | Model: XLD-A19

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your coolo Smart WiFi Zigbee LED Light Bulb. This smart bulb offers versatile lighting options with dimmable RGBCW (Red, Green, Blue, Cool White, Warm White) capabilities, allowing you to customize your home's ambiance. It supports both WiFi and Zigbee protocols for seamless integration with various smart home ecosystems, including Ewelink, Amazon Alexa, Google Home, and Yandex Alice.

coolo Smart WiFi Zigbee LED Light Bulb product lineup with E27, GU10, E14 bulbs, Ewelink app, and smart home logos.

Figure 1: coolo Smart WiFi Zigbee LED Light Bulb product lineup, showing E27, GU10, and E14 bulb types, an Ewelink app screenshot, and compatibility logos for Zigbee, WiFi, Ewelink, Amazon Alexa, Google Assistant, SmartThings, and Yandex Alice.

2. Safety Instructions

  • To avoid electric shock, always turn off the power to the light fixture before installing or replacing the bulb.
  • Do not use the bulb in fully enclosed luminaires, as this may shorten its lifespan due to heat accumulation.
  • Do not expose the bulb to direct water contact or use in excessively humid environments.
  • This bulb is designed for indoor use only.
  • Do not disassemble or modify the bulb.
  • Keep out of reach of children.

3. Package Contents

Please check the package for the following items:

  • 1 x coolo Smart WiFi Zigbee LED Light Bulb (E27, E14, or GU10, depending on your purchase)
  • 1 x User Manual (this document, or a printed version)

4. Setup and Installation

4.1. Physical Installation

  1. Ensure the power to the light fixture is turned off at the main switch.
  2. Screw the smart bulb into the appropriate socket (E27, E14, or GU10) until it is secure.
  3. Turn on the power to the light fixture. The bulb should light up.

4.2. App Download

The coolo Smart Bulb works with the eWeLink app. Download the app to your smartphone:

  • For iOS: Search "eWeLink" on the App Store.
  • For Android: Search "eWeLink" on Google Play.
  • Alternatively, scan the QR code provided in the manual image below to download the app.
Scanned user manual showing app download QR codes, pairing instructions, and app interface.

Figure 2: Excerpt from the user manual showing app download instructions, Bluetooth pairing steps, compatible pairing mode, and app interface overview.

4.3. Adding the Device (Bluetooth Pairing)

  1. After powering on for the first time, the device will automatically enter Bluetooth Pairing mode (indicated by a "breathing mode" light effect).
  2. Open the eWeLink app, tap "+" and select "Bluetooth Pairing".
  3. Follow the prompts in the app to complete the pairing process.
  4. If the device is not paired within 3 minutes, it will exit Bluetooth Pairing mode. To re-enter, turn the light switch OFF-ON-OFF-ON-OFF-ON repeatedly at 1-second intervals. The "breathing mode" indicates it's in Bluetooth pairing mode.

4.4. Compatible Pairing Mode (If Bluetooth Pairing Fails)

  1. Turn the light switch OFF-ON-OFF-ON-OFF-ON repeatedly at 1-second intervals. The quick flash indicates the device has entered compatible pairing mode.
  2. In the eWeLink app, tap "+" and select "Compatible Pairing Mode".
  3. For Android: Enter your Wi-Fi password and tap "Next". Wait for pairing to complete.
  4. For iOS: Enter your Wi-Fi password, tap "Next", then connect to the Wi-Fi SSID starting with "ITEAD-******" and enter the password "12345678". Return to the eWeLink app and tap "Next". Wait for pairing to complete.

4.5. Switching Network

If you need to change the Wi-Fi network the bulb is connected to, turn the light switch OFF-ON-OFF-ON-OFF-ON repeatedly at 1-second intervals. The bulb will enter Bluetooth pairing mode, allowing you to pair it to a new network.

4.6. Factory Reset

Deleting the device from the eWeLink app will restore it to factory settings.

4.7. Voice Assistant Integration

Your coolo Smart Bulb can be integrated with popular voice assistants for hands-free control.

Living room with smart lights controlled by Alexa and Google Assistant.

Figure 3: Example of voice control with Amazon Alexa and Google Assistant, demonstrating how to change light colors with voice commands.

  1. Ensure your smart bulb is successfully paired with the eWeLink app.
  2. Open your Amazon Alexa, Google Home, or Yandex Alice app.
  3. Navigate to the "Skills" or "Works with Google" section and search for "eWeLink".
  4. Enable the eWeLink skill/service and link your eWeLink account.
  5. Discover devices. Your smart bulb should now appear and be controllable via voice commands (e.g., "Alexa, set lamp to red," "Hey Google, turn on the bedroom light").

4.8. Group Control

Control multiple bulbs simultaneously by grouping them in the eWeLink app.

House exterior showing multiple lights under group control.

Figure 4: Illustration of group control, where a single phone can manage multiple smart bulbs across different areas of a home.

  1. In the eWeLink app, select the first bulb you wish to group.
  2. Look for a "Group" or "Create Group" option.
  3. Select other bulbs to add to the group and name your group (e.g., "Living Room Lights").
  4. You can now control all bulbs in that group with a single command.

5. Operating the Smart Bulb

5.1. Color and Brightness Adjustment

The eWeLink app provides full control over your bulb's lighting characteristics.

Room examples showing 16 million colors and warm white dimmable lighting.

Figure 5: Examples of room ambiance created with 16 million colors and warm white light, demonstrating dimmable and multi-color capabilities.

  • Brightness: Use the slider in the app to adjust the light intensity from 1% to 100%.
  • Color Temperature: Adjust the white light from warm (2700K) to cool (6500K) to suit your preference.
  • RGB Colors: Select from a palette of 16 million colors to create any mood.

5.2. Scene Modes

The eWeLink app allows you to set up custom scenes or use pre-set ones for different activities or moods.

  • Create scenes like "Movie Night," "Reading," or "Party" with specific colors and brightness levels.
  • Activate scenes with a single tap in the app or via voice commands.

5.3. Timer Control and Schedules

Automate your lighting with timers and schedules.

User setting a timer for smart lights.

Figure 6: Screenshot demonstrating the timer control feature, allowing users to schedule lights to turn on or off at specific times.

  • Set daily schedules for lights to turn on/off automatically.
  • Use countdown timers for specific events.

5.4. Usage as an Ordinary Bulb

If you power on the bulb, it will enter quick pairing mode (the bulb changes from bright to dim and cycles). After 10 seconds, if you power it off, it will go neutral and keep warm light at the highest brightness.

6. Maintenance

  • Ensure the power is off before cleaning the bulb.
  • Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • No user-serviceable parts inside.

7. Troubleshooting

7.1. Common Problems

  1. Why did this device always fail to add?
    • You may have entered a wrong Wi-Fi password.
    • There might be too much distance between the device and your router, or environmental interference. Try moving closer to the router.
    • The Wi-Fi network must be 2.4GHz; 5GHz networks are not supported.
    • MAC address filtering might be enabled on your router. Turn it off temporarily during pairing.
    • Ensure you have a stable network connection.
  2. How many control methods are available for this device?
    • Control methods include Wi-Fi, LAN control, and 2.4G remote control.
  3. How to check whether this device is offline?
    • There is a prompt for offline devices on the device home page in the eWeLink app when the device is offline.
  4. What new features can be accessed when this device is in 2.4G remote control?
    • In this mode, you can adjust brightness, color temperature, and color. You can also control this device via Bluetooth or AI remote control.

7.2. Other Issues

  • Bulb not responding: Check if the bulb is powered on and properly screwed into the socket. Ensure your Wi-Fi network is active and the bulb is within range.
  • Pairing difficulties: Some users report that pairing can take multiple attempts or resets. Ensure you follow the pairing steps carefully and try factory resetting the bulb if issues persist.
  • Zigbee2MQTT compatibility: While many users report successful integration with Zigbee2MQTT and Home Assistant, ensure your Zigbee coordinator is up-to-date and properly configured.
  • Color/Brightness sync issues (Home Assistant): Some users have noted that the bulb might miss combined color and brightness change commands, leading to out-of-sync states. Try sending color and brightness commands separately if this occurs.

8. Specifications

FeatureSpecification
Model NumberXLD-A19
Brand Namecoolo
Power SourceAC
VoltageAC100~240V
Base TypeE27 (also available in E14, GU10)
Is Smart DeviceYes
Luminous Flux249-2000 Lumens (typically 500-999 Lumens)
Color Temperature2700K~6500K (RGBCW)
Beam Angle270°
Average Life50,000 hours
LED Chip BrandEpistar
LED Chip Model2835
Power Tolerance5%
ShapeGlobe (for E27), Candle (for E14), Reflector (for GU10)
CertificationsCE, FCC, ROHS
Recommended Area3-8㎡

9. User Tips

  • Pairing Patience: If initial pairing is difficult, try multiple resets and follow the OFF-ON sequence precisely. Many users find success after a few attempts.
  • Zigbee Integration: These bulbs generally integrate well with Zigbee 3.0 coordinators, including Home Assistant (ZHA) and Zigbee2MQTT. Ensure your coordinator firmware is up-to-date.
  • Color Brightness: While the white light is generally bright, the RGB colors may appear less intense at 100% brightness compared to the white tones.
  • Voice Control: Users report flawless function with Yandex Alice, Amazon Alexa, and Google Assistant, offering full control over colors and light sensitivity.
  • Brightness Range: Some users note that the perceived brightness difference between 100% and 70% might be minimal, but the bulbs can dim effectively down to 1%.
  • Combined Commands: If using Home Assistant, some users experience issues when sending combined color and brightness commands. Try separating these commands if you encounter sync problems.

10. Warranty and Support

For warranty information, technical support, or further assistance, please refer to the official product page or contact your retailer. Keep your purchase receipt for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.