QIDEWIN T20 7443 W21/5W 1157 BAY15D T25 3157 P27/7W

Contents

QIDEWIN Dual Color LED Car Bulb Instruction Manual

Models: 1156, 1157, 7443, 3157, 3156, 7440, 7443

1. Introduction

Thank you for choosing QIDEWIN Dual Color LED Car Bulbs. These bulbs are designed to provide enhanced visibility and style for your vehicle, functioning as both Daytime Running Lights (DRL) or parking lights and turn signal lights. They feature a switchback function, allowing them to display one color (white or ice blue) for DRL/parking and another color (amber) for turn signals.

QIDEWIN Dual Color LED Car Bulbs showing different base types and color outputs

Figure 1: QIDEWIN Dual Color LED Car Bulbs with various base types and color options.

2. Safety & Setup Instructions

2.1 Safety Warnings

  • Installation and debugging should only be performed by professional personnel. Do not modify internal circuits or light sources without authorization.
  • Ensure the vehicle's ignition is off and the engine is cool before attempting installation.
  • Keep the device and its cord out of reach of children under 3 years old.

2.2 Installation

  1. Identify the correct bulb type for your vehicle (e.g., 1157 BAY15D, 7443 T20, 3157 T25). Refer to your vehicle's owner's manual for specific bulb replacement procedures.
  2. Carefully remove the existing bulb from its socket.
  3. Connect the QIDEWIN LED bulb directly to the corresponding socket in your car. Ensure the plug model matches.
  4. Test the functionality of the bulb (DRL/parking and turn signal) before fully reassembling the light housing.
Wiring diagrams for BAY15D, 7443, and 3157 bulb types

Figure 2: Wiring diagrams for BAY15D, 7443, and 3157 bulb types. Each diagram shows the positive (+) and negative (-) terminals for DC 12V input, indicating how to connect the bulb for white/amber light.

3. Operating Instructions

These dual-color LED bulbs operate automatically based on your vehicle's electrical signals:

  • DRL/Parking Light Mode: When your vehicle's DRL or parking lights are active, the LED bulb will illuminate in either white or ice blue, depending on the specific bulb variant purchased.
  • Turn Signal Mode: When the turn signal is activated, the bulb will switch to amber, providing a clear and bright indication of your intended turn. Once the turn signal is disengaged, the bulb will revert to its DRL/parking light color.
Illustration of white and amber dual-color operation

Figure 3: Dual-color operation: Parking or DRL is white, turn signal is amber.

Illustration of ice blue and amber dual-color operation

Figure 4: Dual-color operation: Parking or DRL is ice blue, turn signal is amber.

Video 1: Demonstration of the dual-color switchback functionality of the LED bulb, showing transitions between white/ice blue and amber light.

4. Maintenance

  • Cleaning: Turn off the vehicle's lights before cleaning. Use a soft, lint-free cloth to gently wipe the bulb's surface if necessary. Avoid abrasive cleaners or solvents.
  • Storage: If bulbs are removed for storage, keep them in a dry place at room temperature (15°C - 35°C).
  • Inspection: Periodically inspect the bulbs for any signs of damage or loose connections.

5. Troubleshooting

  • Bulb Not Lighting Up:
    • Check the connection to ensure it is secure and properly seated.
    • Verify the polarity. Some LED bulbs are polarity sensitive; try flipping the bulb 180 degrees if it doesn't light up initially.
    • Check your vehicle's fuse box for any blown fuses related to the lighting circuit.
  • Hyper-Flashing (Rapid Blinking):
    • While these bulbs are designed with canbus compatibility, some vehicles may still require load resistors to prevent hyper-flashing due to the lower power draw of LEDs compared to incandescent bulbs.
  • Incorrect Color or Function:
    • Ensure the bulb base type (e.g., 1157, 7443, 3157) is correct for your vehicle's socket. An incorrect fit can lead to improper contact.
    • Re-check wiring connections if any custom wiring was involved.

6. Specifications

Features of QIDEWIN LED Car Bulb

Figure 5: Key features including 360-degree lighting, 45SMD 2835 chips, and HD glass projector.

FeatureDetail
Brand NameQIDEWIN
Item TypeTurn Signal
Voltage12 V
Interface TypeT25 (3157), T20 (7443), BAY15D (1157)
Lumens2400LM
LED Chips45SMD 2835
Light Projection360° Lighting with HD Glass Projector
Item Weight9g
OriginMainland China

7. User Tips

  • Brightness: Users have reported excellent brightness, ensuring good visibility for both DRL and turn signal functions.
  • Compatibility Check: Before purchasing and installing, double-check the exact bulb base type (e.g., 1157 BAY15D, 7443 T20, 3157 T25) required for your vehicle's specific make, model, and year to ensure proper fit and function.
  • Quantity: Pay close attention to the product description regarding the quantity of bulbs included in your order.

8. Warranty & Support

For any warranty claims, technical support, or inquiries regarding your QIDEWIN Dual Color LED Car Bulbs, please contact your original seller or retailer. Please refer to the user manual PDF for additional details: View User Manual (PDF).

Manufacturer Information:

Manufacturer: Guangzhou QIDEWIN Electronic Technology Co., Ltd
China Guangdong Province Guangzhou Baiyun District Yongping Subdistrict Guan Ting Xi Jie No:32

EU Authorized Representative: SUCCESS COURIER SL
CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.