haozee TS0601

Contents

Haozee Tuya Smart Zigbee Soil Tester User Manual

Model: TS0601

1. Introduction

Thank you for purchasing the Haozee Tuya Smart Zigbee Soil Tester. This device is designed to help you monitor your plants with ease by detecting air temperature and soil moisture. It enables smart monitoring, dynamic change tracking, and automated watering through smart linkage with the Tuya Smart Life app and a Zigbee hub.

To ensure optimal product performance and longevity, please read this manual thoroughly and retain it for future reference.

Haozee Smart Zigbee Soil Tester with app interface and plant
Haozee Smart Zigbee Soil Tester in use, showing the device, a plant, and the associated mobile application interface.

2. Safety Information and Precautions

Observe the following precautions to ensure safe and effective use of your soil tester:

  • Before inserting the Flower Monitor into the ground, ensure the outer surface of the device is clean.
  • Insert the soil moisture sensor into the ground, ensuring at least two-thirds of the sensor probe is submerged. The main body of the sensor should remain above the soil line to prevent damage and ensure proper function.
  • Ensure maximum exposure of the sensor probe to the top of the unit.
  • Check for the absence of standing water on the soil moisture sensor before insertion.
  • After insertion, allow 1-2 minutes for the device to stabilize and provide accurate readings.
Diagram illustrating correct sensor insertion depth in soil
Proper insertion of the soil tester, showing the sensor probe in the soil and the main body above ground.

3. Setup Guide

3.1 Package Contents

The package should contain the following items:

  • Haozee Smart Zigbee Soil Tester (main unit with sensor probe)
  • Silicone Case (pre-installed)
  • User Manual (this document)

Note: 2 x AAA Alkaline batteries are required but not included in the package.

3.2 App Installation and Account Setup

  1. Download the Smart Life App: Search for "Smart Life" in your device's app store (Google Play for Android or App Store for iOS) and download the application.
  2. Open the Smart Life App: Launch the app and either create a new account or log in with an existing one to begin the setup process.
Diagram of sensor components and setup steps from original manual, including QR codes for app download
Overview of the sensor components (battery, button, LED) and visual guide for app download and device pairing. QR codes for Smart Life app are visible.

3.3 Device Pairing (Requires Tuya Zigbee Hub)

This device requires a Tuya Zigbee hub to function. Ensure your Zigbee hub is set up and connected to the Smart Life app before proceeding.

  1. Enter Configuration Mode: Long press the button on the soil tester for 6 seconds until the green LED light flashes rapidly (3 times), indicating it has entered pairing mode.
  2. Add Device in App: In the Smart Life app, tap "Add device" or the "+" icon to add a new smart device. The app will search for nearby devices.
  3. Connect: Wait for the connection process to complete (indicated by 100% in the app).
  4. Name Device: Once connected, you can edit the name of your plant monitor within the app.

4. Operation

4.1 Initial Insertion and Reading

Once paired, insert the Smart Monitor into the soil of your plant pot as described in the Safety Information. If the soil is too dry, water it before insertion. Allow 1-2 minutes for the device to take its initial readings.

4.2 Real-time Monitoring and Remote Control

The Smart Life app provides real-time monitoring of air temperature and soil moisture. You can view current conditions and dynamic changes directly from your smartphone.

App remote control interface showing real-time humidity and temperature
The Smart Life app displaying real-time humidity and temperature readings.

The device detects and records changes in temperature and humidity in real-time. You can view historical data graphs within the app to track trends over time. Note that data is typically stored for the last 7 days.

Real-time detection of status changes, showing historical data graph in the app
The app interface showing historical data for humidity and temperature.

4.4 Smart Automation and Notifications

Utilize the Smart Life app to set up smart events and automation rules. For example, you can configure the system to send notifications to your phone if your plants are short of water (e.g., humidity drops below a set threshold). This allows for automated watering actions through smart linkage with compatible irrigation systems.

App notification for low plant moisture
Example of a low moisture notification received on a mobile device.

5. Maintenance

5.1 Cleaning

Regularly clean the outer surface of the sensor probe to prevent soil buildup and ensure accurate readings. Use a soft, damp cloth to wipe the probe clean. Do not use abrasive cleaners or immerse the entire device in water.

5.2 Battery Replacement

The device is powered by 2 x AAA Alkaline batteries. The Smart Life app provides a low battery reminder feature, allowing you to check the remaining battery power at any time. You will receive a notification when the battery level is critically low, ensuring continuous operation.

To replace batteries:

  1. Carefully remove the silicone case.
  2. Open the battery compartment.
  3. Replace the old batteries with two new LR03 AAA Alkaline batteries, ensuring correct polarity.
  4. Close the battery compartment and reattach the silicone case.
Low battery reminder in the app and battery type (AAA)
The app displaying battery level and an illustration of the required AAA batteries.

6. Troubleshooting

  • Device not connecting/pairing: Ensure your Tuya Zigbee hub is powered on and within range. Confirm the device is in pairing mode (green LED flashing). Check that your Smart Life app is updated to the latest version.
  • Inaccurate moisture readings: Ensure the sensor probe is inserted correctly and deeply enough into the soil (at least 2/3 of the probe). Very wet soil might consistently report 100% humidity. Ensure the soil around the sensor is not compacted.
  • No data updates in app: Check battery levels. Ensure the device is within range of your Zigbee hub. Verify your internet connection for the Smart Life app.
  • Compatibility: This device is designed to work with a Tuya Zigbee hub and the Smart Life app. While some users report compatibility with ZHA (Zigbee Home Automation), official support is through Tuya.

7. Specifications

Feature Specification
Model Number TS0601
Brand Name haozee
Smart Home Platform Tuya
Protocol Zigbee (requires Tuya Zigbee hub)
Operating Voltage 3V
Battery Type 2 x AAA Alkaline battery (not included)
Soil Moisture Measurement Range 0% - 100%
Temperature Measurement Range -20℃ to 60℃ (14°F to 140°F)
Temperature Accuracy ±1℃
APP Data Response Time 60 seconds
Dimensions (approx.) 17 cm (Length) x 3 cm (Width) x 2 cm (Height) - based on package dimensions

8. User Tips

  • Easy Connection: Many users report easy and quick connection with the Smart Life app and Tuya Zigbee hubs. Follow the pairing steps carefully for a smooth setup.
  • ZHA Compatibility: Some users have successfully integrated the sensor with Zigbee Home Automation (ZHA) for broader smart home ecosystem compatibility.
  • Moisture Reading Accuracy: For best results, ensure the sensor is inserted into the soil at the recommended depth. If you consistently get 100% readings, the soil might be oversaturated, or the sensor might not be properly calibrated for extremely wet conditions.
  • Plant-Specific Needs: Consult plant-specific care guides to determine the ideal humidity and temperature ranges for your particular plants. The sensor provides data, but understanding your plant's needs is key to effective automation.

9. Warranty and Support

For detailed warranty information and further technical support, please refer to the official product documentation or contact the manufacturer directly. A comprehensive user manual in PDF format is available for download at this link.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.