T&G TG365

Contents

T&G TG365 Portable Bluetooth Speaker

Model: TG365

1. Introduction

Thank you for purchasing the T&G TG365 Portable Bluetooth Speaker. This manual provides detailed instructions for setting up, operating, and maintaining your speaker. Please read this manual carefully before use and keep it for future reference.

The T&G TG365 is a versatile portable wireless speaker featuring Bluetooth V5.3 connectivity, FM radio, TF card and USB playback, AUX input, and TWS (True Wireless Stereo) functionality. It delivers powerful 10W sound with dynamic LED lights that sync to your music, making it ideal for both indoor and outdoor use.

2. Important Safety Information

  • Do not expose the speaker to extreme temperatures, direct sunlight, or high humidity.
  • Keep the speaker away from water and other liquids. While it is waterproof, prolonged submersion is not recommended.
  • Do not attempt to disassemble, repair, or modify the speaker yourself. This will void the warranty and may cause damage or injury.
  • Use only the specified charging voltage (5V/500mA) and cable to prevent damage to the battery.
  • Keep out of reach of children.
  • Avoid listening at high volumes for extended periods to prevent hearing damage.

3. Package Contents

Please check that all items are present:

  • T&G TG365 Portable Bluetooth Speaker
  • Micro USB Charging Cable
  • AUX Audio Cable
  • User Manual (this document)

4. Specifications

Feature Specification
Bluetooth Version V5.3
Bluetooth Profiles L2CAP/A2DP/AVCTP, HSP/HFP
Wireless Working Distance Up to 10 meters
Signal-to-Noise Ratio (SNR) ≥90dB
Battery Capacity 3.7V, 1200mAh
Playback Time (Normal Volume) Approximately 3 hours
Speaker Driver Size 45mm * 2
Speaker Power 4Ω/5W * 2 (Total 10W)
Frequency Response 120Hz-20KHz
Unit Dimensions (H x W x D) 171.5mm x 68mm x 66mm (6.78in x 2.6in x 2.6in)
Unit Weight Approximately 348g
Charging Voltage/Current 5V/500mA
Charging Time Approximately 3 hours
Waterproof Rating Yes

Product dimensions and weight are approximate. Actual performance may vary based on usage and environment.

T&G TG365 speaker with dimensions 17.7cm height and 6.6cm width, showing top and bottom views with ports.
Figure 4.1: Product Size and Port Layout (17.7cm H, 6.6cm W)

5. Product Overview

Familiarize yourself with the speaker's buttons and ports:

Pink T&G TG365 speaker showing multiple connection methods, including close-ups of the mesh fabric, top control panel, and bottom ports.
Figure 5.1: Speaker Design and Connection Points

Key and Slot Functions:

  1. DC 5V Slot: Micro USB port for charging the speaker.
  2. TF Slot: Insert a TF (Micro SD) card here for MP3 audio playback.
  3. USB Slot: Insert a USB flash drive here for MP3 audio playback.
  4. AUX Line-in Slot: 3.5mm audio input for connecting external devices.
  5. Power Switch: Long press to turn the speaker ON/OFF.
  6. Play/Pause / FM Scan / Call Button:
    • In Music Mode (USB/TF/Wireless/Line-in): Short press to Play/Pause.
    • In FM Mode: Short press to auto-search stations; press again to stop searching.
    • In Wireless (Bluetooth) Mode (with phone paired): Short press to Answer/Hang up calls; double press to Redial.
  7. Previous Track / Volume Down Button (-): Short press for previous track; long press to decrease volume.
  8. Next Track / Volume Up Button (+): Short press for next track; long press to increase volume.
  9. Mode Switch / LED Light Control (M):
    • Double press to switch between modes (USB/TF/Wireless/Line-in/FM).
    • Short press to cycle through LED light flashing modes.
    • Triple press to turn LED lights ON/OFF.

6. Initial Setup

6.1 Charging the Speaker

  1. Connect the Micro USB charging cable to the DC 5V slot (1) on the speaker.
  2. Connect the other end of the cable to a USB power adapter (5V/500mA, not included) or a computer's USB port.
  3. The charging indicator light will illuminate. The speaker is fully charged when the light turns off or changes color (refer to specific model behavior if different).
  4. Charging time is approximately 3 hours.

6.2 Powering On/Off

  • To Power On: Long press the Power Switch (5) until you hear an audible prompt.
  • To Power Off: Long press the Power Switch (5) again until you hear an audible prompt.
Video 6.1: Product Demonstration, LED Lights, and Button Functions

7. Operating Instructions

7.1 Bluetooth (Wireless) Mode

  1. Power on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light.
  2. Enable Bluetooth on your mobile device (smartphone, tablet, computer).
  3. Search for available Bluetooth devices and select "TG365" from the list.
  4. Once paired, you will hear an audible confirmation, and the LED light will stop flashing.
  5. You can now play music from your device through the speaker.
  6. If no device is connected wirelessly for 30 minutes, the speaker will automatically power off.

7.2 FM Radio Mode

  1. Power on the speaker. Press the Mode Switch (M) button (9) repeatedly until you enter FM Radio mode.
  2. For better signal reception, connect the AUX audio cable to the AUX line-in slot (4); it acts as an antenna.
  3. Short press the Play/Pause button (6) to initiate an automatic station search. The speaker will scan and save available FM stations.
  4. Short press the Play/Pause button (6) again to stop the search.
  5. Use the Previous Track (-) (7) and Next Track (+) (8) buttons to navigate between saved stations.

7.3 TF Card / USB Playback Mode

  1. Ensure your TF card or USB flash drive is formatted to FAT32 and contains MP3 audio files.
  2. Insert the TF card into the TF slot (2) or the USB flash drive into the USB slot (3).
  3. The speaker will automatically detect the storage device and begin playing music. If it doesn't, press the Mode Switch (M) button (9) to cycle to the correct mode.
  4. Use the Play/Pause button (6) to control playback.
  5. Use the Previous Track (-) (7) and Next Track (+) (8) buttons to change tracks.

7.4 AUX Line-in Mode

  1. Connect one end of the 3.5mm AUX audio cable to the AUX line-in slot (4) on the speaker.
  2. Connect the other end to the audio output jack of your external device (e.g., computer, tablet, phone).
  3. The speaker will automatically switch to AUX mode. If not, press the Mode Switch (M) button (9) to cycle to AUX mode.
  4. Control music playback and volume from your external device.

7.5 TWS (True Wireless Stereo) Function

To use TWS, you need two TG365 speakers.

  1. Ensure both TG365 speakers are powered on and in Bluetooth mode, but NOT connected to any mobile device.
  2. Long press the Mode Switch (M) button (9) on one of the speakers for 2-3 seconds until you hear an audible prompt, indicating it's searching for another speaker.
  3. The two speakers will automatically pair with each other. Once paired, you will hear a confirmation sound.
  4. Now, enable Bluetooth on your mobile device and connect to "TG365". Both speakers will play audio in stereo.
  5. To disconnect TWS, long press the Mode Switch (M) button (9) on either speaker for 3 seconds.

7.6 LED Light Control

  • Short press the Mode Switch (M) button (9) to cycle through different LED light flashing modes.
  • Triple press the Mode Switch (M) button (9) to turn the LED lights ON or OFF.
Five T&G TG365 speakers in different colors (grey, pink, black, camouflage, red) with LED lights active, and text 'Wireless Speaker With LED Light'.
Figure 7.1: T&G TG365 Speakers with LED Lights

8. Maintenance and Care

  • Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • If the speaker gets wet, wipe it dry immediately. Do not charge it until it is completely dry.
  • Store the speaker in a cool, dry place when not in use for extended periods.
  • Avoid dropping or subjecting the speaker to strong impacts.

9. Troubleshooting

Problem Possible Solution
Speaker won't turn on. Ensure the battery is charged. Connect to a power source and try again.
Cannot pair via Bluetooth. Make sure the speaker is in Bluetooth pairing mode. Disable and re-enable Bluetooth on your device. Ensure no other devices are connected to the speaker. Move closer to the speaker.
No sound from speaker. Check volume levels on both the speaker and your connected device. Ensure the correct mode (Bluetooth, AUX, TF/USB) is selected.
FM radio signal is weak. Connect the AUX audio cable to the AUX line-in slot; it acts as an external antenna to improve reception.
Speaker freezes or crashes. Long press the Power Switch (5) for 8 seconds to perform a hard reset.
TF card/USB drive not playing. Ensure the card/drive is formatted to FAT32 and contains MP3 files. Try re-inserting the card/drive.

10. User Tips

  • For optimal sound quality, ensure the speaker is placed on a stable surface.
  • When using the FM radio, connecting the AUX cable can significantly improve signal reception.
  • If you experience any issues, a quick reset by holding the power button for 8 seconds can often resolve them.
  • While the speaker supports TWS, it is generally designed to work best with another identical TG365 model for seamless stereo pairing. Compatibility with older or different T&G models for TWS cannot be guaranteed.

11. Frequently Asked Questions (FAQ)

Q: Is it possible to connect with another previous model T&G speaker for TWS?
A: The TWS function is designed for two identical TG365 speakers to create a stereo pair. While some T&G models might share similar technology, compatibility for TWS with previous or different models is not guaranteed. For the best experience, use two TG365 speakers for TWS.

12. Warranty and Support

This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support or warranty claims, please contact the seller or the manufacturer's customer service.

For additional information or assistance, you may refer to the official product guides and documents available in PDF format. A link to the user manual PDF is provided by the seller for your convenience.

Note: The official user manual in PDF format can be accessed via the seller's product page or by clicking here.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.