1. Product Information
This manual provides essential information for the safe and efficient use of your E27 Lamp Base Hemp Rope Pendant Light.
- Product Name: Lamp Base
- Model: 48512396 (E27 Lamp Base)
- Brand: VGEBY
- Batch/Serial Number: 854129563
2. Safety Information
WARNING: To avoid electric shock, always turn off the power at the main circuit breaker before installation or servicing. Installation should be performed by a qualified electrician if you are unsure.
- Keep the device and its cord out of reach of children under 3 years old.
- Do not exceed the maximum wattage specified for the E27 lamp holder.
- Ensure all connections are secure and properly insulated.
- Do not use in wet or damp locations unless specifically rated for such environments.
- If any damage is observed on the product or wiring, discontinue use immediately and consult a professional.
3. Setup and Installation
3.1 Preparation
- Remove all protective packaging materials from the equipment.
- Inspect the goods for any damage that may have occurred during transit. If damaged, do not proceed with installation and contact support.
- Ensure you have the necessary tools: screwdriver, wire strippers, electrical tape (optional), and a ladder if installing on a high ceiling.
3.2 Wiring and Mounting
Note: Always ensure the power supply is OFF at the circuit breaker before beginning any electrical work.
- Unscrew the mounting bracket from the ceiling rose.
- Attach the mounting bracket to your ceiling junction box using appropriate screws (not included, typically provided with your junction box).
- Connect the electrical wires from your ceiling to the wires of the pendant light. Typically, the live wire (often brown or red) connects to the live wire of the pendant (often red), and the neutral wire (often blue or black) connects to the neutral wire of the pendant (often black). Ensure secure connections, preferably using terminal blocks.
- Carefully push the wired ceiling rose up against the ceiling, aligning it with the mounting bracket. Secure the ceiling rose to the bracket using the provided screws.
- Screw an E27 bulb (not included) into the lamp holder.
- Restore power at the circuit breaker and test the light.
4. Operating Instructions
Once installed and a bulb is inserted, operate the pendant light using your standard wall switch connected to the circuit.
4.1 Decorative Use
The hemp rope design allows for creative customization. You can tie various attractive and unique knots or wrap the rope around beams or hooks to achieve your desired aesthetic.
5. Maintenance
5.1 Cleaning
- Ensure the light is turned off and cooled down before cleaning.
- Wipe the hemp rope and metal parts with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or liquids directly on the light fixture.
5.2 Bulb Replacement
- Turn off the power at the wall switch and, if possible, at the circuit breaker.
- Allow the bulb to cool completely before touching it.
- Unscrew the old E27 bulb counter-clockwise.
- Screw in a new E27 bulb clockwise, ensuring it is securely seated.
- Restore power and test.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on |
|
|
| Light flickers |
|
|
7. Specifications
| Material | Hemp rope, Copper wire, Plastic (E27 lamp holder, suction cup) |
| Length | 1m / 3.3ft |
| Lamp Base Type | E27 |
| Voltage | 85-265V |
| Life Time | 8,000 H |
| Sucker Size (Ceiling Rose) | 9.8cm / 3.9in |
| Weight | Approx. 230-265g |
8. User Tips
- Bulb Choice: For energy efficiency and a warm aesthetic, consider using LED Edison-style bulbs with a warm white color temperature.
- Adjustable Length: The hemp rope can be adjusted in length by tying knots or looping it through the ceiling rose before final installation to achieve your desired hanging height.
- Creative Styling: Experiment with different knots or draping styles to personalize the look of your pendant light.
9. Warranty and Support
For any inquiries, technical support, or warranty claims, please contact the manufacturer or the EU authorized representative:
Manufacturer Information:
- Company Name: Zhongshan Jinbao Lighting Factory
- Full Address: 6th Floor, No.28 Xianxing Road, Sansha Village, Henglan Town, Zhongshan, Guangdong, China
- Telephone: +86-13631142235
EU Authorized Representative:
- AR Company Name: Nenninger GmbH
- Full Address: Friedrichstr. 95, 10117 Berlin, Germany
- Email: nenningerde@gmail.com
- Telephone: +49-12345678910
For further details, you may refer to the original user manual PDF: View User Manual (PDF)