coolo TZ-Z1-Y C

Contents

Zigbee Smart Vibration Sensor User Manual

Brand: Coolo | Model: TZ-Z1-Y C

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Coolo Zigbee Smart Vibration Sensor. This device is designed to detect real-time motion, vibration, and tilt, sending instant notifications to your smartphone via the Smart Life or Tuya app when integrated with a compatible Zigbee gateway. It supports smart automation for linking with other smart devices and offers customizable sensitivity settings.

For a downloadable PDF version of this manual, please refer to the official user manual (PDF).

Coolo Zigbee Smart Vibration Sensor with phone showing notification and feature icons

Figure 1: Zigbee Smart Vibration Sensor with key features and app notification example.

2. Safety Information

Please read this manual carefully before using the product to ensure correct operation and to avoid damage. The manufacturer is not responsible for any consequences caused by abnormal operation.

  • Keep the device away from water and high humidity environments.
  • Do not attempt to disassemble or repair the device yourself.
  • Use only the specified battery type (CR2450).
  • Dispose of batteries according to local regulations.

3. Package Contents

Ensure all items are present in the package:

  • Zigbee Vibration Sensor (Model: TZ-Z1-Y C)
  • User Manual
  • 3M Adhesive Sticker
  • Battery Insulation Film Removal Tool (Pin)
  • CR2450 Battery (pre-installed or separate)
Contents of the Zigbee Vibration Sensor package, including sensor, manual, and pin tool.

Figure 2: Package contents of the Zigbee Vibration Sensor.

4. Specifications

Parameter Value
Product NameZigbee Vibration Sensor
Model NumberTZ-Z1-Y C
Wireless ProtocolZigbee 3.0
Acceleration Range±2g
Tilt Alarm Threshold±10°
Working Voltage3V
Battery TypeCR2450
Standby Current≤10uA
Standby Time>15 Months
Working Temperature-10°C to 55°C
Working Humidity0% to 99% RH
Product SizeØ40 × 13mm
OriginMainland China
CertificationsCE, FCC, UL
Smart Home PlatformTuya

5. Setup Guide

5.1. Network Configuration

  1. Power On: Gently rotate the battery cover counter-clockwise to open it. Remove the battery insulation film to power on the product. Close the cover by rotating clockwise.
  2. Reset for Pairing: Press the RESET button (small hole on the sensor, use the provided pin tool) for 3 seconds and then release. The red LED indicator will flash, indicating it is in network configuration mode.
  3. Add Device to Gateway: Open your Smart Life or Tuya app. Ensure your Zigbee gateway is powered on and connected to the app. Follow the instructions in your gateway's manual to add a new device. Search for the vibration sensor.

Note: This Zigbee sensor requires a compatible Zigbee gateway (hub) to function with the Smart Life/Tuya app and other smart home platforms.

5.2. Installation

  1. Prepare Surface: Ensure the target surface (e.g., door, window, safe, washing machine) is clean, dry, and smooth.
  2. Affix Sensor: Peel off the protective film from one side of the 3M adhesive sticker and apply it to the back of the sensor. Then, peel off the other side and firmly press the sensor onto the desired position for a few seconds.
Zigbee Vibration Sensor installed on a window pane.

Figure 3: Sensor installed on a window.

6. Operating Instructions

6.1. Smart Life / Tuya App Integration

Once paired with your Zigbee gateway, the sensor will appear in your Smart Life or Tuya app. From the app, you can:

  • View real-time status (vibration, tilt).
  • Receive instant push notifications for detected activity.
  • Set up smart automation rules with other compatible devices (e.g., turn on a smart switch when vibration is detected).
Diagram showing Zigbee Hub, Vibration Sensor, and Smart Switch for automation, with a phone displaying Smart Gateway app.

Figure 4: Smart automation setup example.

Smartphone displaying a vibration alarm notification, with a cat opening a door in the background.

Figure 5: Smart alerts notification example.

6.2. Real-time Monitoring and Event Records

The app provides a log of all detected events, including vibration and tilt. You can review these records at any time to monitor activity remotely.

Smartphone screen showing real-time monitoring logs with 'Vibration detected' and 'Tilt detected' entries.

Figure 6: Real-time monitoring in the app.

6.3. Customize Sensitivity Settings

You can adjust the sensor's sensitivity within the Smart Life or Tuya app to suit your specific needs. This allows you to fine-tune how easily the sensor triggers an alarm.

Smartphone app interface for adjusting vibration sensor sensitivity from Low to High, with examples of triggering events.

Figure 7: Sensitivity adjustment in the app.

6.4. Low Battery Alarm

The sensor is equipped with a low battery alarm feature. You will receive a notification in the app when the battery level is low, prompting timely replacement.

Smartphone app screen showing battery level and a 'Lower battery' toggle for the vibration sensor.

Figure 8: Low battery alarm feature in the app.

7. Maintenance

7.1. Battery Replacement

When the low battery alarm is triggered, replace the CR2450 battery:

  1. Gently rotate the battery cover counter-clockwise to open it.
  2. Remove the old CR2450 battery.
  3. Insert a new CR2450 battery, ensuring correct polarity.
  4. Close the battery cover by rotating it clockwise until secure.

8. Troubleshooting

  • Sensor not connecting to Zigbee hub:
    • Ensure the battery insulation film is removed and the battery is correctly inserted.
    • Press the reset button for 3 seconds to put the sensor into pairing mode (red LED flashes).
    • Verify your Zigbee gateway is powered on, connected to the internet, and in pairing mode within the Smart Life/Tuya app.
    • Some users have reported issues connecting with specific Zigbee bridges (e.g., Sonoff ZB bridge). Ensure your gateway is compatible with Tuya Zigbee devices.
  • Inconsistent or no tilt detection:
    • While the product is designed for tilt detection, some users have reported that tilt functionality may not be present or as sensitive as vibration detection. Verify the specific version of your sensor if tilt is a critical feature.
    • Ensure the sensor is mounted securely and the tilt angle exceeds the ±10° threshold for detection.
  • Sensor not sensitive enough / too sensitive:
    • Adjust the sensitivity settings within the Smart Life or Tuya app (refer to Section 6.3).
    • Consider the mounting orientation; some users report better sensitivity when mounted horizontally compared to vertically.
  • Alexa compatibility issues (e.g., state not updating):
    • While the sensor is advertised as compatible with Amazon Alexa, some users have experienced issues with real-time state updates. Ensure your Tuya/Smart Life skill is properly linked to Alexa and check for any available firmware updates for the sensor or gateway.
  • Receiving too many notifications:
    • Adjust the sensitivity settings in the app to a lower level.
    • Configure notification timing or rules within the Smart Life/Tuya app to only send alerts during specific periods or under certain conditions.

9. User Tips

  • Home Assistant Integration: The sensor is reported to work well with Home Assistant via Zigbee2MQTT (z2m) or ZHA. Ensure your Home Assistant setup has a compatible Zigbee coordinator.
  • App Sensitivity: Take advantage of the in-app sensitivity adjustment to prevent false alarms or ensure critical events are detected.
  • Automation Ideas: Use the sensor for creative automations, such as detecting when a washing machine or dryer cycle finishes, or monitoring doors/windows for unauthorized access.
  • Mounting: Experiment with mounting positions. Some users find horizontal mounting provides more consistent vibration detection than vertical.

10. Frequently Asked Questions (FAQ)

Q: How do I set up this sensor with Home Assistant?
A: The sensor is compatible with Home Assistant through Zigbee2MQTT (z2m) or ZHA. You will need a Zigbee coordinator connected to your Home Assistant instance. Follow the standard device pairing procedure for your chosen Zigbee integration (e.g., put the sensor in pairing mode by pressing the reset button, then initiate device discovery in Home Assistant).
Q: Is there a way to set up timing for notifications, so I don't get alerts every time I open a window?
A: Yes, within the Smart Life or Tuya app, you can create automation rules or scenes. These allow you to specify conditions (e.g., time of day, home/away status) under which notifications are sent, or to trigger other actions instead of just notifications.

11. Warranty and Support

For product support, technical assistance, or warranty inquiries, please contact the Coolo Official Store directly through your purchase platform. Please have your purchase details and product model number (TZ-Z1-Y C) ready.

© 2024 Coolo Official Store. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.