Introduction
The 8BitDo Ultimate 2C Wired Controller is a high-performance gamepad designed for an enhanced gaming experience on Windows and Android platforms. It features advanced Hall Effect joysticks and Hall-Linear triggers for precision and durability, along with asymmetric rumble motors for immersive feedback. This manual provides detailed instructions for setup, operation, and maintenance of your controller.
Package Contents
Please check that all items are present:
- 8BitDo Ultimate 2C Wired Controller
- USB Cable
- User Manual (this document)
Specifications
| Feature | Description |
|---|---|
| Brand Name | 8Bitdo |
| Model Number | Ultimate 2C Wired |
| Compatible Platform | PC, Android |
| PC System Compatibility | Windows 10 (version 1903) or later, including Windows 11 |
| Interface Type | USB (Wired) |
| Hall Effect Joysticks | Yes (GuliKit Sensor Module) |
| Wear-resistant Joysticks | Yes |
| RGB Lighting Joysticks | No |
| Trigger Button Type | Hall-Linear |
| D-pad Switch Type | Tactile switch |
| ABXY Switch Type | Membrane |
| Bumpers Switch Type | Tactile switch |
| Battery Included | No |
| High-concerned Chemical | None |
| Certification | CE |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 17 cm x 16 cm x 8 cm |
| Package Weight | 0.381 kg |
Setup
Before connecting your controller, familiarize yourself with its layout:
1. Windows Connection
- Required System: Windows 10 (version 1903) or above.
- Hold the X button while connecting the controller to a USB port on your Windows device using the provided USB cable.
- Wait until the controller is successfully recognized by your Windows device. The Status LED will stay solid once connected.
2. Android Connection
- Required System: Android 8.0 or above.
- OTG Support: Your Android device must support and have OTG functionality enabled. Please contact your device manufacturer for more information.
- Hold the B button while connecting the controller to a USB port on your Android device using the provided USB cable.
- Wait until the controller is successfully recognized by your Android device. The Status LED will stay solid once connected.
Operating Instructions
Hall Effect Joysticks and Triggers
The controller is equipped with Hall Effect joysticks and Hall-Linear triggers for superior performance:
Turbo Function
The Turbo function allows for rapid, repeated input of a button press. Please note the following:
- The D-pad, View, Menu, and Home buttons do not support the Turbo function.
- Turbo settings are not saved permanently and will revert to default settings after the controller is powered off or disconnected.
1. Manual Turbo Mode
- To Turn On: Hold the button you wish to assign the turbo functionality, then press the Star button. The Mapping indicator will blink rapidly.
- To Turn Off: Hold the button with turbo functionality, then press the Star button again. The Mapping indicator will turn off.
2. Auto Turbo Mode
- To Turn On: Hold the button you wish to assign the auto turbo functionality, then press the Star button twice. The Mapping indicator will blink rapidly.
- To Turn Off: Hold the button with auto turbo functionality, then press the Star button again. The Mapping indicator will turn off.
L4/R4 Button Configuration
The L4 and R4 buttons (rear paddles) can be configured to mimic other button inputs:
- The Mapping indicator will blink continuously when a configured button is pressed.
- To Configure: Hold the L4 or R4 button, then hold the button you would like to configure it to (e.g., A, B, X, Y), and finally press the Mapping button to complete the configuration.
- To Cancel Configuration: Hold the L4 or R4 button, then press the Mapping button.
Maintenance
- Keep the controller clean by wiping it with a soft, dry cloth.
- Avoid exposing the controller to extreme temperatures, humidity, or direct sunlight.
- Store the controller in a safe place to prevent damage when not in use.
- Do not use harsh chemicals or abrasive cleaners on the controller.
Troubleshooting
If you encounter issues with your controller, consider the following:
- Controller Not Recognized: Ensure the USB cable is securely connected to both the controller and your device. Verify that your device meets the minimum system requirements (Windows 10 version 1903+ or Android 8.0+ with OTG). Try a different USB port or cable.
- Buttons Not Responding: Check if the controller's Status LED is solid, indicating a successful connection. If using Turbo functions, ensure they are configured correctly.
- Android OTG Issues: Confirm that OTG support is enabled in your Android device's settings. Consult your device manufacturer's manual for specific instructions.
User Tips
Based on user feedback, the 8BitDo Ultimate 2C Wired Controller is appreciated for its comfortable feel and ease of handling, offering excellent value for its features.
Safety Warnings
- Always use batteries, chargers, and accessories provided or approved by the manufacturer.
- The manufacturer is not liable for any safety issues arising from the use of non-manufacturer-approved accessories.
- Do not attempt to disassemble, modify, or repair the device yourself. Unauthorized actions may result in serious injury.
- Avoid crushing, disassembling, puncturing, or attempting to modify the device, as these actions can be dangerous.
- Any unauthorized changes or modifications to the device will void the manufacturer's warranty.
Firmware Update
To ensure optimal performance and access the latest features, it is recommended to keep your controller's firmware updated.
Please visit support.8bitdo.com to access the Ultimate Software V2 and download the latest firmware.
Support
For further information, additional support, or to view the official user manual in PDF format, please visit the 8BitDo support website:
- Online Support: support.8bitdo.com
- User Manual (PDF): A detailed user manual in PDF format can be found at this link.