GIRIER ZigBee Smart TRV

Contents

GIRIER TRV Tuya ZigBee Smart Thermostatic Radiator Valve Instruction Manual

Model: ZigBee Smart TRV

1. Introduction

The GIRIER TRV (Thermostatic Radiator Valve) is a self-regulating valve designed for hot water heating systems. It controls room temperature by adjusting the flow of hot water to the radiator, allowing for precise temperature management between 5-30°C and potential energy savings of over 15% annually. This smart thermostat is compatible with common radiator valves and is designed for easy installation without needing to drain the heating system.

Watch this video for a visual guide on product display, installation, and key features:

Video: Product Overview, Installation, and Feature Demonstration

2. Package Contents

The package for your Smart Thermostatic Radiator Valve typically includes the following items:

  • ZigBee Radiator Thermostat (TRV)
  • 2 x 1.5V AA Batteries (Optional, may be included)
  • Adapters for various valve types (e.g., Danfoss RA, RAVL)
  • Screws for adapters
  • User Manual

Below is a visual representation of the TRV and its accessories, highlighting various clamp types for effortless installation:

Diagram showing Smart Thermostatic Radiator Valve and various adapters including M30 x 1.5mm, Danfoss RAVL, Danfoss RAV, M28x1.5mm, Giacomini, and Caleffi valves.

Image: Smart Thermostatic Radiator Valve and various adapters for different valve standards.

3. Setup & Installation

3.1 Prerequisites

Before installation, ensure you have the following:

  • A router that supports 2.4GHz WiFi.
  • A Tuya ZigBee Gateway Hub.
  • The Smart TRV device.
  • A smartphone with the TuyaSmart or Smart Life app installed.

3.2 Battery Installation

  1. Push the battery compartment and remove the cover.
  2. Insert 2*AA batteries, ensuring correct polarity.
  3. Replace the cover.

3.3 TRV Installation on Radiator

The TRV is designed for effortless installation on most common radiator valves with an M30 x 1.5 thread. Adapters are provided for specific valve types like Danfoss RA, RAV, and RAVL.

  1. Select the suitable adapter for your radiator valve.
  2. Install the TRV onto your radiator valve. No need to drain the heating system.
  3. After installation, short press the button on the TRV. The TRV will start to calibrate.
  4. Wait a few seconds until the "PAPA" icon disappears from the display, indicating calibration is complete.

3.4 App Download & Account Registration

  1. Download the TuyaSmart or Smart Life app from your device's app store (App Store for iOS, Google Play for Android).
  2. Register an account using your phone number or email address, then log in.

3.5 Pairing with Tuya ZigBee Gateway Hub

  1. First, pair the Tuya ZigBee Gateway Hub with the app. Follow the in-app instructions to add the wireless gateway (ZigBee).
  2. Once the gateway is paired, enter its control page in the app.
  3. On the TRV, long press the button until the indicator flashes, signifying it's in pairing mode.
  4. In the app, click "Add Device" on the hub's home page and wait for the connection.
  5. Once successfully added, the TRV's indicator will stop flashing, and the device will appear in your app.

4. Operation

4.1 Manual Temperature Adjustment

You can manually adjust the temperature directly on the TRV. Rotate the knob to set your desired temperature. The clear LED display will show the current setting.

Image showing the TRV display with temperature and a graph of room temperature vs. set temperature over time.

Image: Accurate temperature control via the TRV, showing room temperature tracking set temperature.

4.2 Automatic Mode

In automatic mode, the temperature is controlled according to the active heating profile. The default temperature settings are 17°C and 21°C. The temperature range is 5-30°C, adjustable in 0.5°C steps. To activate, select the auto mode icon in the app's control panel.

4.3 Manual Mode

In manual mode, the temperature is controlled based on the current setting via the rotary knob. The default temperature is 20°C. The temperature range is 5-30°C, adjustable in 0.5°C steps. To activate, select the manual mode icon in the app's control panel.

4.4 Window Open Detection

The TRV automatically stops heating when it detects a sudden temperature drop (e.g., 5°C in 5 minutes), typically caused by an open window or door. The "OPEN" icon will appear on the device. Heating resumes once the window/door is closed. This feature helps avoid unnecessary energy waste.

Image showing a window open with arrows indicating heat loss, and the TRV display showing 17°C, illustrating energy saving.

Image: Window open detection feature for energy saving.

4.5 Weekly Timer Setting

Program a weekly heating schedule to run regularly. You can define up to ten temperature steps per day. Select a day (single, weekdays, weekend, or whole week) and set the desired time and temperature. The time range is 00:00-24:00 in 10-minute steps, and temperature range is 5-30°C in 0.5°C steps.

Image showing a weekly heating schedule table with different temperatures for various time slots throughout the week.

Image: Programmable weekly heating schedule.

4.6 Holiday Mode

When activated, holiday mode starts at a defined time and maintains a set holiday temperature. To cancel, press the Mode button or switch to another mode in the app.

4.7 Frost Protection Mode

This mode maintains a temperature of 8°C to prevent pipes from freezing. The device displays "AF" when active. To cancel, press the Pair button or disable it in the app settings.

4.8 Heating Stop Mode (Energy Saving)

This mode fully closes the valve to stop heating and save energy. The device displays "HS" when active. To cancel, press the coupling button or disable it in the app settings.

4.9 Anti-Calcification Protection

The TRV automatically performs a weekly cycle to prevent calcification of the valve, ensuring smooth operation and longevity.

4.10 Boost Function

The boost function rapidly heats the radiator by fully opening the valve for 5 minutes. A countdown will be displayed. After 5 minutes, the TRV returns to its previously active mode. To cancel early, press the pairing button or disable it in the app.

4.11 Voice Control

The TRV is compatible with voice assistants like Amazon Alexa and Google Assistant. You can control the temperature using voice commands. For example, say "Alexa, set the temperature to 21°C." Alexa will confirm with "ok" and adjust the temperature accordingly.

4.12 Linking with Automation Scenarios

You can create automation scenarios within the TuyaSmart/Smart Life app. For instance, link the TRV with a door/window sensor: if the sensor detects an open window, the TRV can automatically lower the temperature to save energy. This is configured under the "Automation" section in the app.

5. Maintenance

5.1 Battery Replacement

When the low battery icon (68) appears on the display, it indicates that the battery power is below 12%. Replace the 2*AA batteries as soon as possible. If only the ( ) icon appears, the device is no longer operational due to critically low battery.

5.2 Cleaning

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.

6. Troubleshooting

6.1 Error Codes

CodeProblemSolution
68Low BatteryReplace batteries.
F1Valve drive is slowCheck installation, check heating valve.
F2Actuation range too largeCheck radiator thermostat attachment.
F3Adjustment range too lowCheck if valve stem is stuck.

6.2 Reset Procedure

To reset the device, press the reset buttons for 5 seconds. The device will display "FAC" and then reset. Note that after a reset, previously saved data will not be retained, and the device may need to be re-paired.

7. Specifications

FeatureSpecification
Power Supply2 x 1.5V AA Batteries
Temperature Range5℃-30℃
DisplayLED
Max Radiated Power10dBm
Dimensions (LxHxP)59 x 59 x 101 mm
Weight190g (with batteries) / 140g (without batteries)
Working Temperature-10℃-40℃
Working EnvironmentIndoor
Safety CertificationsCE, RoHS
Wireless ConnectionZigBee (2.4GHz Frequency)
Degree of ProtectionIP20
Battery LifeApprox. 1.5 years (new alkaline batteries)
Offset Temperature Range-5℃-5℃
Constant Temperature Tolerance±0.7℃
Connection StandardM30x1.5mm
MAX Travel6mm
Child-lockSupported
Hub RequirementTuya ZigBee hub required
APP CompatibilityTuyaSmart/Smart Life
Voice Control CompatibilityAlexa, Hey Google

8. User Tips

  • The GIRIER TRV is generally easy to set up, making it accessible for most users.
  • The device works as expected, providing reliable temperature control.
  • For optimal performance, ensure your ZigBee gateway is within range and connected to a stable 2.4GHz Wi-Fi network.

9. Warranty & Support

This device complies with CE and RoHS regulations. For detailed warranty information and technical support, please refer to the official GIRIER website or contact their customer service. A comprehensive user manual in PDF format is available for download from the seller's product page for further reference.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.