XIAOMI Repeater Pro

Contents

Xiaomi Repeater WiFi Pro User Manual

Model: Repeater Pro

Brand: Xiaomi

1. Introduction

The Xiaomi WiFi Repeater Pro is a device designed to extend your existing Wi-Fi signal, providing enhanced coverage throughout your home or office. It helps eliminate dead zones and ensures a stable internet connection in areas with weak signals.

Xiaomi Wi-Fi Range Extender Pro 300 Mbps

Image: Xiaomi Wi-Fi Range Extender Pro, highlighting 300 Mbps speed and enhanced coverage.

2. Product Overview

Familiarize yourself with the main components of your Xiaomi Repeater WiFi Pro.

Xiaomi Repeater Pro with indicator light and reset hole labeled

Image: Front view of the Xiaomi Repeater Pro, showing the indicator light and reset hole.

Indicator Light Statuses:

  • Solid Blue: Working normally
  • Flashing Blue: Upgrading
  • Solid Yellow: Starting up
  • Flashing Yellow: Waiting for initialization
  • Flashing Red: Hardware fault

Reset Hole:

  • Press and hold for more than 5 seconds to restore factory settings.

3. Setup Instructions

Choose the appropriate setup method based on your existing router.

Method 1: For Xiaomi Routers with MiNET Function

If your home router is a Xiaomi router and supports the "MiNET" function (indicated by an "MI" button on the front or a "MiNET" button and logo on the back), follow these steps:

  1. Place the repeater near your router. After powering on, wait for the yellow light to flash.
  2. Press the MiNET button on your router and wait for the connection.
  3. Once setup is successful, the repeater's indicator light will turn solid blue. You can then move the repeater to another location without needing to reconfigure it.

Method 2: For Non-MiNET Xiaomi Routers or Other Brands

If your home router does not support the "MiNET" function, follow these steps:

  1. Place the repeater near your router. After powering on, wait for the yellow light to flash.
  2. Scan the QR code below, or go to "Xiaomi App Store" or "Apple App Store" to download the "Mi Home" App. Open the "Mi Home" App, follow the prompts, or click "+" to add the Xiaomi WiFi Repeater Pro and follow the instructions.
  3. App setup process with QR code, connection progress, and success screen

    Image: Screenshots showing the app setup process, including a QR code for downloading the Mi Home app, connection progress, and a successful setup confirmation.

  4. Once setup is successful, the repeater's indicator light will turn solid blue. You can then move the repeater to another location without needing to reconfigure it.

4. Operation

The purpose of using a repeater is to enhance an existing wireless signal. Before setting it up, you must know which signal you want to amplify and its wireless password. The repeater works like a relay: the main router is position one, the repeater is position two, and your mobile phones, computers, and other devices are the finish line. The position one and position two athletes continuously run back and forth to deliver the baton to the finish line, thereby achieving the goal of transmitting the Wi-Fi signal to a farther distance. The more athletes involved in the relay, the farther the Wi-Fi signal can be transmitted.

Diagram showing Wi-Fi coverage extension with a router and two repeaters

Image: Diagram illustrating how a main router's Wi-Fi signal is extended by two repeaters to cover a larger area.

House diagram illustrating extended Wi-Fi coverage

Image: Illustration of a multi-story house showing how the repeater extends Wi-Fi coverage to different rooms and floors.

Xiaomi Repeater Pro mounted on a wall, highlighting 2x2 external antennas, easy setup, and 300Mbps

Image: Xiaomi Repeater Pro mounted on a wall, emphasizing its dual external antennas, ease of setup, and 300Mbps speed.

5. User Tips

  • LAN Cable Compatibility: The Xiaomi Repeater WiFi Pro does not feature any LAN ports, meaning it is not compatible with wired Ethernet connections. It functions purely as a wireless repeater.
  • AP/Bridge Mode: This device is designed to operate as a Wi-Fi range extender (repeater mode) to amplify an existing wireless signal. Due to the absence of LAN ports, it cannot function in Access Point (AP) mode (creating a new Wi-Fi network from a wired connection) or typical bridge mode scenarios that require wired connectivity.

6. Troubleshooting

What to do if the Xiaomi WiFi Repeater cannot work normally?

First, check the repeater's status via the Xiaomi WiFi APP or Mi Home APP, and then troubleshoot according to the following steps:

  1. If the signal is poor, it is recommended to change the position of the repeater to a location without obvious obstructions from the main router.
  2. If the repeater is offline, first rule out whether the main router's WiFi signal is abnormal. If there is no problem, it is recommended to power off and restart the repeater.
  3. Check if the main router has enabled a blacklist or whitelist.
  4. If none of the above solves the problem, press and hold the reset button for more than 5 seconds until the indicator light turns solid yellow, complete the reset, and set it up again.

What to do if the network speed slows down after using the Xiaomi WiFi Repeater for a period of time?

If you find that the network speed slows down after using the repeater, it may be due to wireless environmental interference. At this time, check the repeater's status through the Xiaomi WiFi or Mi Home APP. If a poor signal prompt appears, it is recommended to shorten the distance between the repeater and the main router and try again.

How to set up the Xiaomi WiFi Repeater in a new environment?

You need to reset the repeater and re-initialize it.

7. Specifications

Attribute Value
Brand NameXIAOMI
XiaoMi ModelRepeater Pro
TypeWireless
Wi-Fi Transmission Standard802.11ac
2.4G Wi-Fi Transmission Rate300 Mbps
Wi-Fi Supported Frequency2.4G
Frequency2.4 GHz
Wireless transmission rate300m
Antenna TypeFixed
WAN Ports0
LAN Ports0
Supports WPSNo
Supports WDSNo
Support MeshNot Supported
With Modem FunctionNo
Standards And ProtocolsWi-Fi 802.11g
Wireless Communication Standard802.11.g
Frequency Band ClassSingle-Band
Recommended UsesHome
PackageYes
OriginMainland China

8. Warranty and Support

Warranty Policy (Three Guarantees Certificate)

For product performance failures caused by non-human damage during the warranty period, you can enjoy the following three guarantee services:

Within 7 days of receipt:

If the Xiaomi WiFi Repeater has quality problems, consumers can choose to return the goods at the invoice price or replace it with a Xiaomi WiFi Repeater of the same model and specifications.

Within 8-15 days of receipt:

If the Xiaomi WiFi Repeater has quality problems, consumers can choose to replace it with a Xiaomi WiFi Repeater of the same model and specifications.

Within 1 year of receipt:

If the Xiaomi WiFi Repeater has quality problems, consumers can go to a Xiaomi official authorized service store for free repair services.

Non-Warranty Conditions

The following situations (including but not limited to) are not covered by the "Three Guarantees" service:

  • No "Three Guarantees" certificate or missing valid invoice, or exceeding the valid period of the "Three Guarantees" service.
  • Damage caused by force majeure such as fire, flood, lightning, etc.
  • Damage caused by not using, maintaining, or storing the product according to the requirements of the product manual.
  • Damage caused by disassembly and repair by non-Xiaomi authorized service personnel.
  • The product model or code on the warranty certificate does not match the actual product.
  • Normal discoloration, wear, and consumption during product use.
  • Product cannot be used due to the consumer's own network reasons.

Support Contact

For more after-sales questions, please visit the Xiaomi after-sales service webpage at http://fuwu.mi.com or call Xiaomi service hotline: 400-100-5678.

You can also refer to the official user manual PDF for more details: Xiaomi WiFi Repeater Pro User Manual (PDF)

9. Environmental Information

Hazardous Substances Statement for Electrical and Electronic Products

Part Name Pb (Lead) Hg (Mercury) Cd (Cadmium) Cr6+ (Hexavalent Chromium) PBBs (Polybrominated Biphenyls) PBDEs (Polybrominated Diphenyl Ethers)
CasingOOOOOO
Metal PartsXOOOOO
Circuit BoardXOOOOO

This table is compiled in accordance with SJ/T11364 regulations.

  • O: Indicates that the concentration of the hazardous substance in all homogeneous materials of this component is below the limit requirements specified in GB/T26572.
  • X: Indicates that the concentration of the hazardous substance in at least one homogeneous material of this component exceeds the limit requirements specified in GB/T26572.

The "X" in this table indicates that the EU RoHS directive's exemptions for certain hazardous substances in specific applications have been used.

Environmental Protection Use Period

This logo Environmental Protection Use Period logo indicates the environmental protection use period of this product and its components. If some components have different environmental protection use periods, they will be marked separately (e.g., battery cells may have another label on the product). This environmental protection use period only applies when the product is used under the conditions specified in the product manual.

Important Safety Note

The socket should be installed near the equipment and should be easily accessible.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.