1. Introduction
The AVATTO TS60 Tuya WiFi Smart Light Switch offers intelligent control over your home lighting. Designed for modern living, it integrates seamlessly with smart home ecosystems, providing app control, voice command capabilities, and scheduled automation. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and safety.
2. Safety Information
Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Always disconnect power at the circuit breaker before installing or servicing the switch.
- Installation should be performed by a qualified electrician or in accordance with local electrical codes.
- Ensure the working voltage and maximum load of the switch are compatible with your electrical system and connected devices.
- A neutral wire is required for the operation of this smart switch.
- Do not use in wet or damp locations.
- Keep out of reach of children.
3. Package Contents
Verify that all items are present in your package:
- Smart Light Switch × 1
- Screws × 2
- User Manual × 1
4. Specifications
| Feature | Specification |
|---|---|
| Dimensions | 80 x 80 mm |
| Working Voltage | AC100-240V (50/60Hz) |
| Max. Load | 800W/Gang (Resistive load) |
| Max. Current | 10A |
| Wireless Frequency | WiFi 2.4GHZ |
| WiFi Standard | 802.11 b/g/n |
| Standby Consumption | 0.1mA |
| Plastic Material | PC flame retardant |
5. Setup and Installation
5.1 Wiring Instructions
Important: A neutral wire (N) is required for this smart switch. Ensure power is disconnected before wiring.
Refer to the diagram above for correct wiring:
- Connect the Live Wire (L) to the 'L' terminal.
- Connect the Neutral Wire (N) to the 'N' terminal.
- Connect the Load Wire (L1) to the 'L1' terminal. For multi-gang switches, connect additional load wires to L2, L3, L4 terminals respectively.
5.2 App Installation
- Search for "Smart Life" in your mobile device's App Store (iOS) or Google Play Store (Android), or scan the QR code provided in the physical user manual.
- Download and install the App.
- If you are a new user, press the "Register" button to create an account. If you already have an account, press the "Login" button.
5.3 Device Pairing
- Ensure your phone is connected to a 2.4GHz Wi-Fi network.
- Enable Bluetooth on your phone.
- Press and hold the device's network pairing button on the smart switch for approximately 5 seconds until the backlight starts flashing.
- Open the Smart Life App and follow the on-screen instructions to add the device. The app should automatically detect the new device.
- If the network configuration fails, repeat steps 3 and 4 to connect again.
6. Operating Instructions
The AVATTO Smart Light Switch offers multiple ways to control your lighting:
6.1 App Control
Once paired, you can control your lights from anywhere using the Smart Life app. The app allows you to:
- Turn lights on/off remotely.
- Adjust ambient light color (e.g., switch between yellow and violet light modes).
- Set up scenes and automations.
6.2 Voice Control
The switch is compatible with popular voice assistants, including Amazon Alexa, Google Home, and Yandex Alice. Link your Smart Life account to your voice assistant app to enable voice commands.
Example commands:
- "Alexa, turn on the living room light."
- "Hey Google, turn off the bedroom light."
6.3 Time Programming (Scheduling)
Set schedules within the Smart Life app for automatic light control. You can program lights to turn on or off at specific times, enhancing convenience and energy efficiency.
- Example: Set pool lights to turn on at 6:30 PM, garden lights at 6:40 PM, living room lights at 6:50 PM, and bedroom lights at 7:00 PM.
6.4 Traditional Wall Control
The smart switch retains traditional manual control, allowing you to physically press the switch to turn lights on or off, complying with daily operating habits.
6.5 Ambient Light Feature
The switch includes an ambient light feature that can change color, typically between yellow and violet, to indicate status or provide subtle illumination.
7. User Tips
- Color Confirmation: Please note that while some promotional images may show black switches, the standard product is typically white. Always confirm the color variant before purchasing if color is a critical factor.
- 2.4GHz WiFi: Ensure your router is broadcasting a 2.4GHz WiFi signal and your phone is connected to it during the pairing process. 5GHz networks are not supported for initial setup.
- Bluetooth for Setup: Keep Bluetooth enabled on your phone during the pairing process for easier device discovery.
8. Troubleshooting
- Device Fails to Pair:
- Ensure your Wi-Fi network is 2.4GHz.
- Verify that the switch's backlight is flashing, indicating it's in pairing mode. If not, press and hold the pairing button for 5 seconds.
- Move your phone closer to the switch and Wi-Fi router.
- If repeated attempts fail, try restarting your Wi-Fi router and the smart switch, then re-attempt the pairing process.
- No Response from Voice Assistant:
- Check if the Smart Life account is correctly linked to your voice assistant (Alexa, Google Home) app.
- Ensure the device name in the Smart Life app is recognized by your voice assistant.
- Verify your voice assistant device is connected to the internet.
- Lights Not Turning On/Off Manually:
- Check if the circuit breaker is on.
- Ensure the wiring is correct, especially the load wire connection.
9. Maintenance
To maintain your smart light switch:
- Clean the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the switch is free from dust and debris to prevent overheating.
- Avoid exposing the switch to excessive moisture or extreme temperatures.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the manufacturer or your retailer. Keep your purchase receipt as proof of purchase.
For additional resources, you may refer to the official AVATTO App or website.