TRIMUI Smart Pro

Contents

Trimui Smart Pro Handheld Game Console

User Manual

Trimui Smart Pro Handheld Game Console with game menu displayed

The Trimui Smart Pro is a portable gaming device designed for retro game enthusiasts, featuring a 4.96-inch IPS screen, Linux operating system, and support for a wide range of emulators.

1. Setup

1.1 Package Contents

Before you begin, please ensure all items are present in the package:

Contents of the Trimui Smart Pro package, including console, user manual, charging cable, and gift box.
  • Trimui Smart Pro Console x1
  • User Manual x1
  • Charging Cable (Type-C) x1
  • Giftbox x1

1.2 Initial Charging

The console comes with a built-in 5000 mAh Li-polymer battery. For optimal performance, fully charge the device before its first use.

  • Connect the provided Type-C charging cable to the console's bottom Type-C port.
  • Connect the other end of the cable to a 5V/1.5A compatible USB power adapter (not included).
  • The middle LOGO indicator light will illuminate during charging.
  • A full charge typically provides approximately 5-6 hours of battery life.

1.3 Inserting the TF Card

The Trimui Smart Pro supports expandable storage up to 256GB via a TF (microSD) card. The TF card slot is located on the device.

  • Locate the TF card slot on the console.
  • Gently insert the TF card into the slot until it clicks into place.
  • To remove, push the card in slightly until it springs out.

Note: For best performance and reliability, it is recommended to use a high-quality, branded TF card. The console supports FAT32 format for USB flash drives, which may also apply to TF cards for certain functions.

2. Operating Instructions

2.1 Unit at a Glance: Controls and Ports

Familiarize yourself with the layout of your Trimui Smart Pro console:

Diagram of the Trimui Smart Pro console showing all buttons, joysticks, ports, and their labels.
  • Joystick: Dual analog joysticks for precise control.
  • D-pad: Directional pad for movement and menu navigation.
  • A/B/X/Y Keys: Action buttons.
  • L1/L2/R1/R2: Shoulder buttons.
  • Start: Game start/pause, menu confirmation.
  • Select: Game selection, menu options.
  • Menu: Access system menu.
  • Function Key: Custom FN switch.
  • Power: Power on/off button.
  • Volume: Volume control buttons.
  • Speaker: Built-in stereo speakers (1W x 2).
  • Microphone: Built-in mono microphone.
  • 3.5mm: Headphone jack.
  • Type-C (Top): USB Host, for connecting USB handles.
  • Type-C (Bottom): Charging port, OTG function.
  • TF Card Slot: For expandable storage.
  • Lanyard Hole: For attaching a lanyard.
  • Indicator: Status light.

2.2 Basic Navigation and Game Management

The Trimui Smart Pro runs on a Linux-based operating system with a Trimui UI, providing an intuitive interface for game selection and system settings.

  • How to Switch Views: On the simulator page, press the START button to switch between flow view and grid view.
  • How to Search for Games:
    1. Press the SELECT button on the emulator page to search for games across all emulators.
    2. Alternatively, press the MENU button, select "Search", and then press the A button to initiate the search.
  • How to Edit the Emulator List:
    1. Press the MENU button, select "Edit", and press the A button to enter edit mode.
    2. To check or uncheck a simulator, press A. Check to display the simulator, uncheck to hide it.
    3. Press B to display a window asking to save changes. Select "Ok" and press A to confirm and finish editing.

2.3 Supported Emulators and Games

The console supports over 26 built-in emulators, allowing you to play a vast library of retro games. It also supports the open-source RetroArch system, enabling users to download games in relevant formats.

Image showing icons of over 26 built-in emulators supported by the Trimui Smart Pro.

Supported systems include: FC, GB, GBC, PS, SFC, GBA, MD, NGP, MS, PCE, NDS, WSC, MAME2003PLUS, MAME2010, PGM, ATARI7800, NGPC, DC, NEO-GEO, PPSSPP, N64, ATARI2600, WONDERSWAN, GG, FBNEO, and more.

2.4 Netplay Functionality

The Trimui Smart Pro supports netplay, allowing you to play with other users via LAN or a mobile hotspot.

2.4.1 Netplay via LAN

  1. Ensure all players have the same game ROM.
  2. All players must be connected to the same WLAN network.
  3. All players must turn on the netplay function in the "System" settings.
  4. The host player enters the game directly.
  5. After a short while, slave players will be able to discover the game hosted in "Netplay".
  6. Slave players can select the game and press A to join.

Note: Please wait until the host is actively playing the game before slave players attempt to join. If the host only starts the game but does not play, slave players may fail to join.

2.4.2 Netplay via Hotspot

  1. Ensure all players have the same game ROM.
  2. The host player opens a mobile hotspot.
  3. Slave players connect to the host's hotspot.
  4. All players must turn on the netplay function in the "System" settings.
  5. The host player enters the game directly.
  6. After a short while, slave players will be able to discover the game hosted in "Netplay".
  7. Slave players can select the game and press A to join.

Note: Similar to LAN netplay, ensure the host is actively playing the game before slave players attempt to join.

3. Maintenance

3.1 Charging Guidelines

To prolong the battery life of your Trimui Smart Pro, adhere to the following charging practices:

  • Always use the provided Type-C charging cable or a high-quality alternative.
  • Charge the device using a 5V/1.5A power source.
  • Avoid using fast chargers or chargers with higher voltage/amperage outputs, as this can damage the battery over time.

3.2 Firmware Update

Keeping your console's firmware updated can improve performance, add new features, and fix bugs. Follow these steps to update the firmware:

  1. Obtain the official firmware update package from the manufacturer's website or support channels.
  2. Place the firmware file in the root directory of your TF card.
  3. Insert the TF card into the console.
  4. Connect the charging cable to the console.
  5. The device should automatically begin the update process.
  6. Once the update is complete, the device will restart and upgrade.

Note: Ensure the device has sufficient battery charge or is connected to power during the update process to prevent interruption.

3.3 SD Card Management

Proper management of your TF card is crucial for game stability and data preservation:

  • Regularly back up your game saves and ROMs from the TF card to a computer.
  • Consider using a high-quality, branded TF card (e.g., Samsung, SanDisk) for better reliability and performance, especially if the included card is generic.
  • If you plan to add many games or custom operating systems (like CrossMix OS), preparing your own TF card is recommended.

4. Troubleshooting

  • Games not loading or getting stuck: This can often be due to a low-quality or corrupted SD card. Try formatting the card (after backing up data) or replacing it with a high-quality, branded TF card. Installing a custom OS like CrossMix OS can also improve game compatibility and performance.
  • Finicky power button: Some users have reported the power button can be a bit inconsistent. Ensure you are pressing it firmly and holding it for the required duration to power on/off.
  • Games lagging: Performance can vary by game and emulator. Ensure your firmware is up to date. For demanding games, consider optimizing emulator settings or installing a custom OS like CrossMix OS, which often provides better performance.
  • Preloaded games in an unfamiliar language: Many preloaded games might be in Chinese or lack language options. You can install custom ROMs in your preferred language or use custom operating systems like CrossMix OS, which often provide more language customization.
  • N64 games performance: N64 games generally run reasonably well, but performance can vary. Some titles may run smoothly, while others might require specific emulator settings or a custom OS for optimal play.
  • Cannot download more games: Games are typically added by placing ROM files onto the TF card. Ensure the TF card is properly formatted and recognized by the console. Refer to online communities for guides on adding games and custom ROMs.

5. Specifications

Detailed technical specifications for the Trimui Smart Pro Handheld Game Console:

Detailed product parameter table for the Trimui Smart Pro, listing hardware and software specifications.
Feature Description
ColorBlack, White, Retro Grey
CPUAllwinner A133P (Cortex-A53 quad-core@1.8GHz)
GPUImagination PowerVR GE8300 660MHz
DRAM1GB LPDDR4X
Built-in Storage8GB eMMC
External StorageTF card slot, supports up to 256GB (FAT32 for USB flash drives)
Display4.96 inch IPS screen, 1280x720 resolution, fully laminated
SpeakerBuilt-in stereo speakers (1W x 2)
Earphone Jack3.5mm headphone jack
MicrophoneBuilt-in mono microphone
Battery5000 mAh Li-polymer, 3.7V (approx. 5-6 hours battery life)
Charging InterfaceUSB Type-C (5V/1.5A charging)
Mood LEDRGB double Joystick mood light
Function KeyCustom FN switch
Vibrating MotorSingle-channel vibration motor
Network BattleSupport
SocketsTop Type-C (USB Host), Bottom Type-C (Charging/OTG), TF card slot
JoystickDual joystick
Operating SystemLinux
System UITrimui UI
Supporting LanguageJapanese, Spanish, Portuguese, English, Simplified Chinese, Traditional Chinese, German, French, Italian, Korean, Russian
WIFIWLAN 802.11 b/g/n
BluetoothBT2.1 + EDR/4.2
Dimensions190mm (Depth) x 81mm (Height) x 20mm (Width)
Recommended Age6+
CertificationCE

6. Warranty and Support

For detailed information regarding product warranty, troubleshooting, and additional support, please refer to the official user manual PDF.

The comprehensive user manual (PDF) can be accessed here.

6.1 FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

7. User Tips

Based on feedback from other users, here are some tips to enhance your experience with the Trimui Smart Pro:

  • SD Card Quality: If you experience issues with games not loading or data corruption, consider replacing the included TF card with a high-quality, branded one (e.g., Samsung, SanDisk). Many users recommend this for better reliability and performance.
  • Custom Firmware/OS: For advanced users, installing custom operating systems like CrossMix OS can significantly enhance performance, provide more customization options, and improve game compatibility. It can also help with language issues for preloaded games.
  • Charging Practices: Avoid using fast chargers. Stick to the recommended 5V/1.5A charging to preserve the battery's lifespan.
  • Game Library: While the console comes with many preloaded games, you can easily add your own ROMs to the TF card. This allows for a personalized game library in your preferred language.
  • Ergonomics: Some users with larger hands find the joysticks a bit small, but most adapt quickly. The console is generally comfortable for extended play sessions.
  • Saving Progress: The device offers an easy way to save your game progress, ensuring you don't lose your achievements.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.