1. Introduction
The Trimui Smart Pro is a portable retro gaming console designed for an immersive gaming experience. Featuring a 4.96-inch IPS screen, a Linux-based operating system, and support for a wide range of classic game emulators, it brings your favorite retro titles to life. This manual provides essential information for setting up, operating, and maintaining your device.

Figure 1: Trimui Smart Pro Handheld Game Console
2. Package Contents
Please check the package for the following items:
- Trimui Smart Pro Handheld Game Console
- USB Type-C Charging Cable
- User Manual (this document)
- (Optional, depending on purchase) MicroSD Card with pre-loaded games
3. Device Layout

Figure 2: Orthographic views of the Trimui Smart Pro console.
3.1 Front Panel
- 4.96-inch IPS Screen: High-resolution display for gaming.
- D-Pad: Directional control.
- Left Analog Joystick: For precise movement, with RGB Mood LED lighting.
- MENU Button: Access system menu options.
- SELECT Button: Game-specific function.
- A/B/X/Y Buttons: Action buttons.
- Right Analog Joystick: For precise movement, with RGB Mood LED lighting.
- START Button: Game-specific function.
3.2 Top Panel
- L1/L2 Buttons: Left shoulder buttons.
- POWER Button: Turn the device on/off.
- OTG Port: USB On-The-Go functionality.
- Volume +/- Buttons: Adjust audio volume.
- R1/R2 Buttons: Right shoulder buttons.
3.3 Bottom Panel
- Custom FN Switch: Function switch.
- MicroSD Card Slot: Insert game storage card.
- USB Type-C Port: For charging and data transfer.
- 3.5mm Headphone Jack: For audio output.
- Built-in Stereo Speakers (1W x 2): For audio output.

Figure 3: Close-up of console details including buttons, Mood LED, FN switch, and speakers.
4. Setup and First Use
4.1 Charging the Device
Before first use, fully charge your Trimui Smart Pro.
- Connect the supplied USB Type-C cable to the Type-C port on the bottom of the console.
- Connect the other end of the cable to a compatible USB power adapter (5V/1.5A recommended) or a computer USB port.
- The charging indicator LED will light up red while charging.
- The LED will turn off when the device is fully charged. The device has automatic overcharge protection.

Figure 4: Battery life and charging specifications.
4.2 Inserting the MicroSD Card
If your console did not come with a MicroSD card pre-installed, or if you wish to use a different one:
- Ensure the device is powered off.
- Locate the MicroSD card slot on the bottom panel.
- Gently insert the MicroSD card into the slot until it clicks into place.
- To remove, push the card in slightly until it springs out.
4.3 Powering On/Off
- To Power On: Press and hold the POWER button on the top panel until the screen lights up.
- To Power Off: Press and hold the POWER button until a power-off menu appears on screen, then select