BQCC 7-inch Car MP5 Player User Manual

1. Introduction

Thank you for choosing the BQCC FX2 7-inch Car MP5 Player. This versatile car stereo offers a range of features including Mirrorlink, wired Android Auto and CarPlay compatibility, USB, AUX, Bluetooth, and FM radio. It features a 1024x600 resolution touch screen and colorful lighting options to enhance your driving experience. This manual provides detailed instructions for installation, operation, and troubleshooting.

2. Package Contents

Please check the package for the following items:

• BQCC FX2 Car MP5 Player Unit
• Power Wiring Harnesses (2 types)
• Remote Control
• User Manual (this document)
• Optional: Reversing Camera (if purchased with the unit)

3. Specifications

4. Setup Instructions

4.1. Unit Dimensions (1 DIN vs 2 DIN)

The FX2 player is available in both 1 DIN and 2 DIN configurations. Ensure you have the correct size for your vehicle's dashboard opening.

4.2. Rear Interface Description and Wiring

Carefully connect the wiring harness to the corresponding ports on the back of the unit and to your vehicle's electrical system. Incorrect wiring can cause damage to the unit or vehicle.

• Red (ACC): Connect to Ignition Switch +12V.
• Black (GND): Connect to Ground wire B-.
• Blue (ANT): Connect to Radio Antenna.
• Green (ILLUMINATION): Connect to Illuminate.
• Brown (KEY): Connect to Steering wheel control.
• Yellow (BATTERY): Connect to Power Supply +12V.
• Pink (REVERSE): Connect to Reversing camera.
• Orange (BRAKE): Connect to Parking brake cable.
• Speaker Wires: Ensure each speaker wire is connected correctly (e.g., White/White-black striped for Front Left, Gray/Gray-black striped for Front Right, Green/Green-black striped for Rear Left, Purple/Purple-black striped for Rear Right). Do not ground, share, or touch speaker wires together to avoid sound distortion or unit damage.
• USB Port: (Only available on some models)
• Video Output 1, Video Output 2: For external displays.
• External Microphone Input: For optional external microphone.
• Left Audio Output, Right Audio Output: For external amplifiers.
• CVBS Input: Composite Video Broadcast Signal input.
• Radio Antenna Input.
• Reversing Video Input (CAMIN): For rearview camera.

4.3. Reversing Camera Installation

If you are installing a reversing camera, follow these steps:

1. Connect the camera's red power wire to the positive pole of the reverse lamp.
2. Connect the camera's black ground wire to the vehicle's ground (GND).
3. Connect the camera's video cable (yellow RCA) to the CAMIN (Reversing Video Input) port on the back of the MP5 player.
4. Connect the pink 'REVERSE' wire from the MP5 player's wiring harness to the positive pole of the reverse lamp (12V). This signal triggers the unit to switch to reverse mode.

Important: If no camera is installed, do NOT connect the REVERSE/BACK cable to any power source. Otherwise, the unit may automatically enter reverse mode, causing malfunction.

4.4. Learning Steering Wheel Controls

To use your car's original steering wheel controls with the unit:

1. On the unit's interface, navigate to the steering wheel control learning section.
2. Press and hold a button on your car's original steering wheel.
3. On the unit's screen, find the corresponding button icon for the function you want to assign.
4. Click the icon on the screen to change its color, indicating successful learning.

5. Operating Instructions

5.1. Remote Control Function

The included remote control allows for convenient operation of the unit.

• MUTE: Mute On/Off
• MODE: Switch mode
• Power On/Off: Turn unit on/off
• VOL+: Volume Up
• ENT: Enter / Play / Pause
• Next Track: Skip to next track
• VOL-: Volume Down
• End Call: End phone call
• Number Buttons (0-9): For direct input
• MENU: Access menu
• Previous Track: Skip to previous track
• Answer Call: Answer phone call

Note:

1. Before first use, remove the battery insulation paper from the bottom of the remote control.
2. If the remote control does not work, remove and clean the battery, then reinsert it. If it still doesn't work, the battery might be low; replace it.

5.2. Phonelink (Mirrorlink)

This feature allows you to mirror your smartphone's screen onto the car MP5 player.

iPhone Mirrorlink (Wired)

When connected via USB, your iPhone screen content will be projected onto the car screen. Note that you cannot control your iPhone from the car screen in this mode.

Android Mirrorlink (Wired)

When connecting an Android device via USB, you will be prompted to install an APP. After installation, reconnect the USB cable. The screen will mirror, and you can control your Android phone from both the player screen and the phone screen. Only image transfer is successful; audio requires Bluetooth connection.

5.3. Apple CarPlay (Wired & Wireless Optional)

CarPlay integrates your iPhone with the car's display, allowing you to use apps like Phone, Music, Maps, and Messages.

• Wired Connection: Connect your iPhone using a USB data cable. The CarPlay interface will launch automatically.
• Wireless Connection: Turn on Bluetooth and Wi-Fi on your iPhone, then connect to the unit's Bluetooth. The CarPlay interface will launch automatically. The signal is transmitted via Wi-Fi, so it works even if Bluetooth is off. If Wi-Fi is off, CarPlay will disconnect.

5.4. Android Auto (Wired & Wireless Optional)

Android Auto integrates your Android phone with the car's display. This feature may require local availability of Google Play services.

• Setup: Download and install the "Android Auto" app from Google Play. Use an Android 6.0 or higher phone with a valid USB data cable.
• Wired Connection: Connect your Android phone using a USB data cable. The Android Auto interface will launch automatically.
• Wireless Connection: Turn on Bluetooth and Wi-Fi on your Android phone, then connect to the unit's Bluetooth. The Android Auto interface will launch automatically. The signal is transmitted via Wi-Fi, so it works even if Bluetooth is off. If Wi-Fi is off, Android Auto will disconnect.

5.5. Bluetooth Connection

Connect your phone via Bluetooth for hands-free calls and audio streaming.

1. Turn on the unit and enable Bluetooth on your mobile phone.
2. Search for the unit's Bluetooth name (e.g., "XXXX") on your phone.
3. Select the unit and enter the pairing password (e.g., "XXXX") if prompted.
4. Once connected, you can answer calls and play music through the car stereo.

5.6. Radio

The unit supports FM radio with a bandwidth of 87.5~108.0MHz. Use the radio application on the unit to scan for stations and save your favorites.

6. Maintenance

To ensure the longevity and optimal performance of your BQCC FX2 Car MP5 Player, follow these general maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the screen and exterior of the unit. Avoid using harsh chemicals or abrasive materials that could scratch the surface.
• Temperature: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or high humidity.
• Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.
• Software Updates: Keep an eye on the manufacturer's website for any available software or firmware updates to ensure the best performance and compatibility.

7. Common Problems and Simple Troubleshooting

7.1. Cannot boot normally

1. Wiring Check: Ensure the yellow wire is connected to the positive pole, the red wire to the key control line, and the black wire to the negative pole. Incorrect or incomplete connections will prevent booting.
2. Incorrect Wiring Color: If the original car wiring colors do not match standard, connecting them incorrectly can cause damage or prevent the unit from turning on.
3. Original Car Plug: The original car plug cannot be directly plugged into the new unit. It must be wired correctly.
4. Fuse Check: If the 3 wires are connected correctly but the unit doesn't boot, check if the fuse on the yellow line is broken. If not, twist the yellow and red wires together, turn on the key, and press the unit's power button.
5. Repeated Fuse Blowing: If the fuse blows every time you replace it, it indicates a short circuit in the unit's protection circuit. This requires professional repair. To confirm, connect the yellow and red wires to a 12V battery or power supply, and the black wire to negative. If it boots, the car's wiring is faulty. If not, the unit is broken.

7.2. Automatic shut-down

1. Cable Error: If the blue cable (automatic antenna power supply) is connected to the unit's power cable, an automatic shutdown will occur. Correct the wiring.
2. Unstable Voltage: Test the unit with a stable 12V-5A power supply. If it doesn't shut down, replace your car's power supply. If it still shuts down, the unit is faulty.

7.3. There is noise

1. Speaker Power: If the original speaker power is too low, noise will occur at high volumes. Solution: Do not set the volume too high.
2. Grounded Speaker Cable: If the speaker cable is grounded, take the iron speaker cable and connect it directly to the unit's speaker cable.

7.4. Remote control cannot be used

1. Test Method: Use your phone camera to check if the remote control's IR emitter lights up when a button is pressed. If it doesn't light up, replace the battery. If it lights up, the remote control is working.

7.5. Settings cannot be saved (no memory)

1. Wiring: The yellow and red lines are connected together (yellow to positive, red to key control).
2. Reversed Wires: Yellow and red wires are reversed; simply change their positions.

7.6. Bluetooth not working

Turn on the unit, search for its Bluetooth name on your mobile phone, and click Connect. After connecting, you should be able to make calls and play music via Bluetooth.

7.7. The product emits smoke

Replace the FUSE. If the problem persists, the internal circuit is burned. After-sales service is required.

7.8. The sound cannot be adjusted

1. Reset the unit or unplug and replug the power cord.
2. The volume knob may be broken and needs replacement.

7.9. Reversing camera does not display

1. Wiring Issues: Check for incorrect or missing wiring. Ensure the reverse control line (pink) is connected to 12V, and the CAM video input interface is correctly connected to the camera's video output and power.
2. Broken Camera: If the camera's lamp does not light up when properly wired, the camera is broken and needs replacement.

7.10. USB devices cannot be played

Format the USB flash drive to FAT32. Re-download one or two songs and try again. If it still doesn't work, replace the USB flash drive.

7.11. FM does not receive radio stations

1. Antenna Connection: Ensure the antenna plug is fully inserted. Check if the antenna is disconnected or the line is broken.
2. Station Search: Use the AS button for automatic search or manually search using the forward/backward buttons. If issues persist, unplug the antenna and insert a screwdriver or metal strip into the antenna port as a temporary antenna for testing.

7.12. No sound right after installation

If there is no sound immediately after installation, it's usually a wiring error or a short-circuited original car speaker wire. Check the speaker cables for short circuits and reconnect if necessary. Verify the number of speaker cables; if only 2 speaker cables are present but your car requires 4, you need to re-route the car's original wiring.

7.13. No sound after a while

Disconnect all speaker cables from the unit. Connect an external speaker to the gray and purple tail lines of the unit. If there is sound, the car's speaker line is short-circuited or the speaker is damaged. If there is no sound, the unit is faulty.

7.14. Restore to factory settings

If CarPlay, Android Auto, or Mirrorlink connections are abnormal, you can restore factory settings: Go to "Basic Settings" > "Restore Factory" > Select "YES". If a reset button is present on the panel, you can also press it to restore settings.

8. User Tips

• For optimal performance with Android Auto/CarPlay, always use high-quality USB data cables.
• If experiencing intermittent connectivity with wireless CarPlay/Android Auto, ensure your phone's Wi-Fi and Bluetooth are both active and stable.
• Consider professional installation for complex wiring, especially if you are unsure about your vehicle's specific wiring configuration.
• Regularly clean the screen with a microfiber cloth to maintain touch responsiveness and clarity.

9. Frequently Asked Questions (FAQ)

Q: Does this unit support wireless Android Auto/CarPlay?

A: Yes, the unit supports both wired and wireless Android Auto/CarPlay. For wireless functionality, ensure both Bluetooth and Wi-Fi are enabled on your smartphone.Q: Can I install this unit in a 1 DIN slot?

A: The FX2 model is available in both 1 DIN and 2 DIN configurations. Please ensure you have selected the correct version for your vehicle's dashboard.

Q: What is the system setup password?

A: The system setup password is "113266".

10. Warranty and Support

For any issues not covered in this manual or for warranty claims, please contact the seller or manufacturer directly. You may also refer to the comprehensive PDF user manual available for download at BQCC FX2 User Manual (PDF) for additional details and language options.

Tips: If the device is updated, the functions are subject to change without prior notice.