Introduction
Thank you for choosing the WESA Grey Power Socket. This manual provides essential information for the safe installation, operation, and maintenance of your new electrical outlet. Please read this manual thoroughly before installation and keep it for future reference.
This product is designed for residential and general-purpose applications, featuring a flame-retardant plastic panel and standard grounding for enhanced safety.
Safety Information
WARNING: Risk of Electric Shock. Improper installation or use can lead to serious injury or death.
- Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
- Always turn off power at the circuit breaker or fuse box before installing, servicing, or removing the socket.
- Do not install in wet or damp locations unless specifically rated for such environments.
- Ensure all wire connections are secure and properly insulated.
- Do not exceed the rated current (16A) or voltage (220V) of the socket.
- Keep children away from electrical outlets.
- This product is not a smart device and does not offer remote control or smart home integration.
Package Contents
- 1 x WESA Grey Power Socket (Model: BZ-04-HUI)
- Mounting Screws (typically included)
Setup and Installation
This power socket is designed for wall-embedded installation. Professional installation is highly recommended.
- Turn Off Power: Locate the circuit breaker or fuse controlling the circuit where the socket will be installed and turn off the power. Verify power is off using a voltage tester.
- Prepare Mounting Box: Ensure you have a standard wall-mounted electrical box suitable for the socket's dimensions. Refer to the product size diagram below for precise measurements.
- Wire Connections: Connect the electrical wires from the wall to the corresponding terminals on the back of the socket. Typically, this involves:
- Live (L) wire
- Neutral (N) wire
- Ground (E) wire (for standard grounding)
- Mount the Socket: Carefully place the wired socket into the wall box. Secure it using the provided mounting screws. Do not overtighten.
- Install Faceplate: Attach the decorative faceplate to the socket.
- Restore Power: Once installation is complete and all connections are secure, turn the power back on at the circuit breaker.
- Test: Test the socket with a known working appliance.
Product Dimensions

Diagram Description: The socket measures 83mm x 83mm (3.26in x 3.26in) on the front panel. The internal mechanism has a depth of 61mm (2.40in) and a height of 32mm (1.25in). The total depth from the wall surface is 43mm (1.69in), with the panel itself being 40mm (1.57in) high.
Operating Instructions
The WESA Power Socket operates as a standard electrical outlet. Simply plug your compatible electrical appliances into the socket. Ensure the appliance's plug is fully inserted into the socket for a secure connection.
Maintenance
- Cleaning: To clean the socket, first turn off the power at the circuit breaker. Use a soft, dry cloth to wipe the surface. Do not use abrasive cleaners, solvents, or excessive moisture.
- Inspection: Periodically inspect the socket for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off the power and have the socket inspected and replaced by a qualified electrician.
- No User-Serviceable Parts: There are no user-serviceable parts inside the socket. Do not attempt to disassemble it.
Troubleshooting
If the socket is not providing power, consider the following:
- No Power: Check your circuit breaker or fuse box. A tripped breaker or blown fuse will cut power to the circuit. Reset the breaker or replace the fuse if necessary.
- Loose Connection: If other outlets on the same circuit are working, there might be a loose wire connection within the socket or the wall box. This requires inspection by a qualified electrician with the power turned off.
- Damaged Socket: If the socket appears damaged, it should be replaced by a qualified electrician.
If the problem persists after checking these points, consult a qualified electrician.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | WESA |
| Model Number | BZ-04-HUI |
| Material | Plastic (Flame Retardant) |
| Rated Current | 16A |
| Socket Type | Socket 220V (EU Standard) |
| Grounding | Standard Grounding |
| Installation Type | Wall Embedded |
| Application | Residential / General-Purpose |
| Standard Size | 83mm*83mm |
| Shape | SQUARE |
| Backlight/Indication | Not applicable |
| Is Smart Device | No |
| Certification | CE, RoHS, WEEE |
| Origin | Mainland China |
User Tips
- Overload Prevention: Avoid plugging too many high-power appliances into a single socket or circuit, as this can lead to overheating or tripping circuit breakers.
- Cord Management: Ensure appliance cords are not pinched, frayed, or placed in high-traffic areas where they could be damaged.
- Child Safety: For households with young children, consider using safety covers for unused outlets.
- Regular Checks: Periodically check the socket and surrounding wall for any signs of heat, such as discoloration or a burning smell. If detected, immediately turn off power and consult an electrician.
Warranty and Support
WESA products are manufactured to high-quality standards. For warranty information and technical support, please refer to the seller's terms of sale or contact your point of purchase. Keep your proof of purchase for any warranty claims.
A detailed user manual in PDF format may also be available for download from the seller's product page: View User Manual (PDF)
