Mastfuyi FY106B

Contents

Mastfuyi Digital Multimeter User Manual

Models: FY106A / FY106B

1. Introduction

Thank you for choosing the Mastfuyi Digital Multimeter. This device is a compact, intelligent, and professional tool designed for electrical measurements, offering both automatic and manual ranging capabilities. It is suitable for a wide range of applications, from basic home electrical checks to professional use. Please read this manual thoroughly before use to ensure safe and proper operation.

2. Product Overview

Key Features:

  • DC Current & AC Current measurement
  • DC Voltage & AC Voltage measurement
  • Resistance measurement
  • Frequency (Hz) measurement
  • Diode testing
  • Capacitance measurement
  • Continuity (On-off beep)
  • Non-Contact Voltage (NCV) detection
  • Live Wire Check
  • Automatic/Manual mode selection
  • Data Hold function
  • Built-in Flashlight
  • Automatic Power Off

Component Identification:

Labeled diagram of the Mastfuyi FY106B Digital Multimeter showing its various parts.

Diagram of the Multimeter (FY106B) with labeled components:

  1. VA LCD (Display)
  2. Function Switching / Torch (long press for flashlight)
  3. Data locking (HOLD button)
  4. ON/OFF button
  5. NCV / LIVE button
  6. COM (Common) Jack
  7. Current Jack
  8. Input Jack
  9. NCV Probe
  10. Flashlight

Package Contents:

Image showing the Mastfuyi Digital Multimeter, user manual, and test leads included in the package.

The package includes the Mastfuyi Digital Multimeter, a user manual, and a set of test leads.

3. Specifications

AttributeValue
Brand NameMastfuyi
Operating ModeAuto/Manual mode
Display TypeDigital Display
DC Voltage Range1V~600V
AC Voltage Range1V~600V
DC Current Range100mA~4A
AC Current Range100mA~4A
Measuring Resistance Range50Ω~40MΩ
Measuring Capacitance Range40000µF (FY106B)
DIY SuppliesElectrical
CertificationCE, FCC

4. Setup

4.1 Unboxing and Initial Inspection

Carefully remove the multimeter and its accessories from the packaging. Inspect all items for any signs of damage. Ensure all components listed in the 'Package Contents' section are present.

4.2 Installing Test Leads

  1. Insert the black test lead into the 'COM' (Common) jack.
  2. Insert the red test lead into the 'Input' jack for voltage, resistance, frequency, capacitance, and diode measurements.
  3. For current measurements (DC/AC Current), insert the red test lead into the 'Current Jack'.

5. Operating Instructions

5.1 Power On/Off

Press the ON/OFF button to turn the multimeter on or off.

5.2 Automatic Recognition Mode

The multimeter features an automatic recognition mode for direct measurement without manually shifting gears for common functions like voltage, resistance, and continuity.

Image demonstrating the automatic recognition feature of the multimeter, showing it measuring AC voltage from a wall outlet.

Automatic recognition allows for direct measurement without manual range selection.

5.3 Function Selection (Manual Mode)

Press the SEL button to cycle through different measurement functions (e.g., DC Voltage, AC Voltage, Hz, Resistance, Continuity, Diode, Capacitance, DC Current, AC Current) when not in auto mode.

5.4 Specific Measurement Functions:

  • DC Voltage: Select DC Voltage mode and connect the test leads to the circuit.
  • AC Voltage: Select AC Voltage mode and connect the test leads to the circuit.
  • Frequency (Hz): Select Frequency mode and connect the test leads to the circuit.
  • Resistance: Select Resistance mode and connect the test leads across the component.
  • Image showing the multimeter performing a resistance measurement on an electrical motor.

    Resistance measurement in progress.

  • Continuity (On-off beep): Select Continuity mode. The meter will beep if there is a continuous path.
  • Diode: Select Diode mode to test diodes.
  • Capacitance: Select Capacitance mode and connect the test leads to the capacitor.
  • Image showing the multimeter performing a capacitance measurement on electronic components.

    Capacitance measurement on electronic components.

  • DC Current: Select DC Current mode and connect the test leads in series with the circuit.
  • AC Current: Select AC Current mode and connect the test leads in series with the circuit.
  • NCV (Non-Contact Voltage) Detection: Press the NCV button. Bring the NCV probe close to the live wire. The meter will indicate the presence of AC voltage without physical contact.
  • Image demonstrating the NCV (Non-Contact Voltage) detection feature of the multimeter near a power strip.

    Non-Contact Voltage detection for safety.

  • Live Wire Check: Press the LIVE button. Insert the red test lead into the live terminal of an outlet or wire. The meter will indicate if it's a live wire.
  • Data Hold: Press the HOLD button to freeze the current reading on the display. Press again to release.
  • Flashlight: Long press the Function Switching / Torch button to turn the flashlight on or off.

5.5 Video Demonstration:

This video demonstrates the unboxing and various functions of the Mastfuyi Digital Multimeter, including auto mode, voltage, frequency, resistance, continuity, diode, capacitance, current, flashlight, data hold, NCV, and live wire detection.

6. User Tips

  • Verify Features: Upon receiving your multimeter, carefully check that all advertised features, such as the diode meter, are present and functioning correctly. If any feature is missing or appears faulty, contact customer support immediately.
  • Readings Stability: For stable readings, especially with capacitance or resistance, ensure good contact with the component and minimize external interference.
  • Battery Life: To prolong battery life, always turn off the multimeter when not in use. The auto power-off feature helps conserve power.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the meter's casing. Do not use abrasives or solvents.
  • Storage: Store the multimeter in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
  • Battery Replacement: When the low battery indicator appears on the display, replace the batteries promptly to ensure accurate measurements. Refer to the full PDF manual for specific battery type and replacement instructions.

8. Troubleshooting

  • No Display/Power: Check battery installation and charge level. Replace batteries if necessary.
  • Inaccurate Readings: Ensure test leads are properly connected and not damaged. Verify the correct function mode is selected. Clean test lead tips and contact points.
  • No Continuity Beep: Ensure the circuit is de-energized before testing. Check if the component is truly continuous.
  • NCV/Live Detection Issues: Ensure the NCV probe is close enough to the AC voltage source.

9. Safety Information

Always adhere to basic safety precautions when using electrical testing equipment to reduce the risk of fire, electric shock, or personal injury.

  • Do not exceed the maximum input limits for any function.
  • Do not use the meter if it or the test leads appear damaged.
  • Ensure the correct function and range are selected before making measurements.
  • Be cautious when working with voltages above 30V AC RMS, 42V peak, or 60V DC, as they pose a shock hazard.
  • Always disconnect the test leads from the circuit before changing functions or ranges.
  • Do not operate the meter in explosive gas, vapor, or dust environments.

10. Support Information

For more detailed instructions, safety guidelines, and advanced features, please refer to the complete user manual available in PDF format:

View User Manual (PDF)

If you encounter any issues or have questions not covered in this manual, please contact Mastfuyi customer support.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.