Vgetting Car Ambient Light Module User Manual

1. Introduction

Thank you for choosing the Vgetting Car Ambient Light Module. This product is designed to enhance your driving experience with customizable interior lighting and intelligent automatic on/off functionality. This manual provides detailed instructions for installation, operation, and maintenance.

2. Safety Information

Ensure all connections are secure before powering on the device.
Do not attempt to modify the product in ways not described in this manual.
Keep the product away from water and extreme temperatures.
Installation should be performed with the vehicle's power off to prevent electrical shorts.

3. Package Contents

Please check the package for the following items:

LED Ambient Light Strip (various lengths/configurations)
USB Controller Module
Human Body Sensor Switch (30S or 60S module)
USB Expansion Dock (if purchased)
Connection Cables

Figure 1: Vgetting Car Ambient Light Kit Overview. Shows the LED strip, USB controller, and sensor module.

4. Setup and Installation

Follow these steps to install your Vgetting Car Ambient Light Module:

Prepare the Installation Area: Clean the surfaces where the LED light strip will be applied to ensure good adhesion.
Route the LED Light Strip: Carefully route the LED light strip along your desired path in the car interior (e.g., dashboard, door panels).
Connect the LED Light Strip: Connect the LED light strip to the output port of the USB Controller Module.
Connect the Sensor Module: Connect the USB Controller Module to the Human Body Sensor Switch.
Connect to Power: Plug the USB connector from the Human Body Sensor Switch into a suitable USB power port in your vehicle (e.g., glove box USB port, USB expansion dock).

Figure 2: USB Interface Connections. Diagram showing output (1: Connect LED lights) and input (2: Connect power supply) for the sensor module.

5. Operating Instructions

5.1 Automatic On/Off Function

The Human Body Sensor Switch provides intelligent control over your ambient lighting:

When you are in the car: The light will turn on automatically.
After you leave the car: The light will turn off automatically after a delay (30 seconds or 60 seconds, depending on your module).

Figure 3: Automatic On/Off Functionality. Illustrates the 30-second automatic shut-off feature when leaving the car.

Video 1: Demonstration of the 60-second automatic shut-off feature.

5.2 Smart App Control

For advanced customization, you can control your ambient lights via a smartphone app:

Download the App: Scan the QR code provided in the troubleshooting section or search for the companion app on your smartphone's app store.
Connect via Bluetooth: Open the app and follow the instructions to connect to your ambient light module via Bluetooth.
Customize Settings: Use the app to adjust brightness, change colors, and select lighting modes.

Figure 4: Smart App Control Feature. Shows a smartphone controlling the ambient light via Bluetooth.

6. Maintenance

Keep the LED strips and sensor module clean and free from dust. Use a soft, dry cloth for cleaning.
Avoid using harsh chemicals or abrasive cleaners, as they may damage the product.
Ensure cables are not pinched or exposed to excessive strain.

7. Troubleshooting (Atmosphere Light APP Settings Q&A)

The following are common problems and solutions you may encounter. For further assistance, contact customer service.

1. How to adjust the brightness of the light strip?

Choose any scene mode and long-press to display the editing page. Click the DIY option. You can see the page for adjusting brightness. Scan the QR code to view a video tutorial.

2. How to make the half-lit light bar fully illuminated?

Click Settings, then choose 'Num of lights setting'. Try setting to 200 LED beads divided into 2 sections. Scan the QR code to view a video tutorial.

3. How to calibrate the color of the light strip?

Click Settings, then click the color calibration page from the settings. Just follow the system steps and finish. Scan the QR code to view a video tutorial.

4. How to correctly activate the lights?

If the switch button is still in the off state, it will not turn on even after repeated plugging and unplugging. You need to long-press the button to activate the light bar. Scan the QR code to view a video tutorial.

8. Specifications

Feature	Specification
Brand Name	VGETTING
Item Type	Atmosphere lamp
Special Features	Multifunctional Atmosphere Light, 30/60 Seconds Module
Voltage	12 V (Operating Voltage for Sensor: 12V-24V)
Material	Acrylic, ABS
Item Weight	0.25 kg
Sensor Dimensions	Approx. 2 x 2 x 0.27 inches
Sensing Distance	About 1 meter
Rated Current (Sensor)	5A
Sensor Function	People come light on, people leave light off, delay of 30/60 seconds

Figure 5: Human Body Sensor Switch Specifications. Details dimensions, sensing distance, current, voltage, and function.

9. User Tips

Cutting the Light Strip: Some users have reported success in cutting the light strip to fit, while others experienced it ceasing to work. Proceed with caution if attempting to cut the strip.
Automatic On/Off: The 30-second or 60-second delay module is highly appreciated for preventing the lights from staying on unnecessarily.
Quality: Users generally find the product to be of good quality.

10. Warranty and Support

For warranty information, technical support, or further inquiries, please refer to the official seller's documentation or contact their customer service. A detailed user manual in PDF format may also be available for download: View User Manual (PDF).

VGETTING Ambient Light Module