Introduction
This manual provides instructions for the installation, operation, and maintenance of your OSRAM LEDriving SL Advance T10 (W5W/194) car LED bulbs. These bulbs are designed to offer superior brightness, extended lifespan, and enhanced energy efficiency for various automotive lighting applications.

Safety Information
- Always ensure the vehicle's ignition is off and the lights are switched off before attempting installation or maintenance.
- Allow existing bulbs to cool down before handling to prevent burns.
- Wear appropriate safety gear, such as gloves and eye protection, during installation.
- Do not touch the LED components directly, as oils from your skin can reduce their lifespan.
- If you are unsure about the installation process, consult a qualified automotive technician.
Product Overview
The OSRAM LEDriving SL Advance bulbs are designed as direct replacements for traditional T10 (W5W/194) incandescent bulbs. They provide a crisp 6000K cool white light, enhancing visibility and modernizing your vehicle's appearance.


Setup and Installation
Follow these steps to install your OSRAM LEDriving SL Advance T10 bulbs:
- Remove the original bulb: Carefully remove the width indicator lights (or other T10/W5W/194 bulbs) from your vehicle.
- Insert the LED bulb: Insert the OSRAM T10 LED bulb directly into the slot. Note that these bulbs are polarized. If the bulb does not light up, remove it, rotate it 180 degrees, and reinsert it. This indicates a change of cathode (polarity reversal).
- Test the light: With the T10 LED bulb inserted, turn on the lights to verify it functions correctly.
- Secure the bulb: Once confirmed working, turn off the lights, put the bulb back in its place, and install it securely.

Applicable Models
These bulbs are generally universal for most models using T10 (W5W/194) wide lights. However, some models may use a T20 interface for width modulation. Refer to your vehicle's maintenance manual to confirm the specific interface type if applicable. Confirmed models that cannot use this specific T10 model include: New Regal, 12 Magotan, Yinglang XT, and Minrui Bao.
Operating Instructions
Once installed, the OSRAM LEDriving SL Advance T10 bulbs operate automatically with your vehicle's lighting system. They are suitable for various applications:
- Interior Lighting (e.g., dome lights, map lights, glovebox lights)
- Reverse Lights
- Stop Lights
- Turn Signal Lights
- Position Lights / Daytime Running Lights
- License Plate Lights

Maintenance
OSRAM LEDriving SL Advance bulbs are designed for long-term, maintenance-free operation. To ensure optimal performance and longevity:
- Keep the bulb's surface clean. If necessary, gently wipe with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Do not attempt to disassemble or modify the bulb, as this will void the warranty and may cause damage.

Troubleshooting
- Bulb does not light up: Check the polarity. Remove the bulb, rotate it 180 degrees, and reinsert. Ensure the connection is secure.
- CANbus error / Dashboard warning light: Some modern vehicles are equipped with a CANbus system that monitors bulb functionality. LED bulbs draw significantly less power than incandescent bulbs, which can trigger a 'bulb out' warning. If you experience a CANbus error, you may need to install additional CANbus decoders (resistors) to resolve the issue. These are typically sold separately.
- Flickering: Ensure the bulb is securely seated and the electrical connection is stable. If flickering persists, it might also be related to CANbus incompatibility, requiring a decoder.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | OSRAM |
| Product Name | LEDriving SL ADVANCE |
| Model Name | 2980CW |
| Interface Type | T10 (W5W/194) |
| Voltage | 12 V |
| Wattage | 1.5W |
| Lumens | 30lm |
| Color Temperature | 6000K (Cool White) |
| Package Include | 2 bulbs |
| Item Weight | 0.1g |
| Origin | Mainland China |
| Fit For | Interior/Reverse/Stop/Turn Signal light |

Warranty and Support
OSRAM LEDriving SL Advance bulbs come with a 2-year OSRAM guarantee. For warranty claims or technical support, please refer to the official OSRAM website or contact your retailer.
A user manual in PDF format is also available for download from the seller's product page for additional details.
User Tips
- Polarity: Remember that these LED bulbs are polarized. If they don't light up initially, simply flip them 180 degrees and reinsert.
- Light Projection: The orientation of the LEDs on the bulb can affect light projection in certain fixtures. For optimal light spread, especially in applications like glovebox lights, ensure the LEDs are aimed appropriately (e.g., outwards or towards a reflector).
- Color Quality: Users report a pure white light at 6000K, without blue or yellow tints, and no flickering.
- Versatile Use: These bulbs are highly effective for interior lighting, position lights, daytime running lights, and even license plate illumination, offering significant brightness improvements.
- Motorcycle Compatibility: The bulbs are also suitable for motorcycles, providing brighter illumination than some standard alternatives.
Frequently Asked Questions (FAQ)
- Q: I get a CANbus error. Is anyone facing the same "issue"?
- A: Yes, some vehicles with CANbus systems may detect the lower power draw of LED bulbs as a 'bulb out' error. This is a common occurrence with LED upgrades. To resolve this, you typically need to install CANbus decoders (load resistors) in conjunction with the LED bulbs. These are usually sold separately and help simulate the power draw of a standard incandescent bulb, preventing error messages.